The eventID corresponding to the sequential frequency.
Currently only supports Event 74 (SIT tone)
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.mib
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
The eventID corresponding to the sequential frequency.
Currently only supports Event 74 (SIT tone)
The eventID corresponding to the sequential frequency.
Currently only supports Event 74 (SIT tone)
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.my.txt
Company: None
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
The eventID corresponding to the sequential frequency.
Currently only supports Event 74 (SIT tone)
seqToneEventID OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " The eventID corresponding to the sequential frequency. Currently only supports Event 74 (SIT tone) " DEFVAL { 74 } ::= { vismSequentialToneDetectGrp 2 }
seqToneEventID OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION " The eventID corresponding to the sequential frequency. Currently only supports Event 74 (SIT tone) " DEFVAL { 74 } ::= { vismSequentialToneDetectGrp 2 }
Vendor: Stratacom
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
[Automatically extracted from oidview.com]
seqToneEventID OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " The eventID corresponding to the sequential frequency. Currently only supports Event 74 (SIT tone) " DEFVAL { 74 } ::= { vismSequentialToneDetectGrp 2 }
seqToneEventID OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " The eventID corresponding to the sequential frequency. Currently only supports Event 74 (SIT tone) " DEFVAL { 74 } ::= { vismSequentialToneDetectGrp 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.24.1.1.4.2.0 | seqToneEventID | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.24.1.1.4.1 | seqToneNumOfFrequencies | 1 | 1 | The number of single frequencies which have to be detected by the sequential tone detector command on VISM. The frequencies shoul… |
1.3.6.1.4.1.351.150.24.1.1.4.3 | seqToneDurationOfEachTone | 1 | 1 | seqToneDurationOfEachtone |
1.3.6.1.4.1.351.150.24.1.1.4.4 | seqToneGapBetweenEachTone | 1 | 1 | seqToneGapBetweenEachtone |
1.3.6.1.4.1.351.150.24.1.1.4.5 | seqToneDurationDeviation | 1 | 1 | Tone duration deviation allowed in 10ms used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.6 | seqToneMaximumGapDuration | 1 | 1 | Maximum tone duration allowed in 10ms used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.7 | seqToneGapDurationDeviation | 1 | 1 | Tone duration deviation allowed in 10ms used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.8 | seqToneFreqDeviation | 1 | 1 | Frequency deviation allowed (1 - 1000 Hz) used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.9 | seqTonePowerLevelCeiling | 1 | 1 | Maximum ceiling power level of the sequential frequency tone (absolute value in dBm) used with sequential tone detector on VISM D… |
1.3.6.1.4.1.351.150.24.1.1.4.10 | seqTonePowerLevelFloor | 1 | 1 | Lowest (floor) power level of the sequential frequency tone (absolute value in dBm) used with sequential tone detector on VISM DS… |
1.3.6.1.4.1.351.150.24.1.1.4.11 | seqToneFrequency1 | 1 | 1 | 1st frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.12 | seqToneFrequency2 | 1 | 1 | 2nd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.13 | seqToneFrequency3 | 1 | 1 | 3rd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.14 | seqToneFrequency4 | 1 | 1 | 4th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.15 | seqToneFrequency5 | 1 | 1 | 5th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.16 | seqToneFrequency6 | 1 | 1 | 6th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.17 | seqToneFrequency7 | 1 | 1 | 7th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.18 | seqToneFrequency8 | 1 | 1 | 8th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.19 | seqToneFrequency9 | 1 | 1 | 9th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.20 | seqToneFrequency10 | 1 | 1 | 10th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |