Nominal tone duration of each single tone in counts of 10ms
used with sequential tone detector on VISM DSP.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.mib
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
Nominal tone duration of each single tone in counts of 10ms
used with sequential tone detector on VISM DSP.
seqToneDurationOfEachtone
View at oid-info.com
Nominal tone duration of each single tone in counts of 10ms
used with sequential tone detector on VISM DSP.
Parsed from file CISCO-WAN-VISM-TONE-PLAN-MIB.my.txt
Company: None
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
Nominal tone duration of each single tone in counts of 10ms
used with sequential tone detector on VISM DSP.
seqToneDurationOfEachTone OBJECT-TYPE SYNTAX Integer32 (1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION " Nominal tone duration of each single tone in counts of 10ms used with sequential tone detector on VISM DSP. " DEFVAL { 33 } ::= { vismSequentialToneDetectGrp 3 }
seqToneDurationOfEachTone OBJECT-TYPE SYNTAX INTEGER(1..65534) ACCESS read-write STATUS mandatory DESCRIPTION " Nominal tone duration of each single tone in counts of 10ms used with sequential tone detector on VISM DSP. " DEFVAL { 33 } ::= { vismSequentialToneDetectGrp 3 }
Vendor: Stratacom
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
[Automatically extracted from oidview.com]
seqToneDurationOfEachTone OBJECT-TYPE SYNTAX Integer32 (1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION " Nominal tone duration of each single tone in counts of 10ms used with sequential tone detector on VISM DSP. " DEFVAL { 33 } ::= { vismSequentialToneDetectGrp 3 }
seqToneDurationOfEachTone OBJECT-TYPE SYNTAX Integer32 (1..65534) MAX-ACCESS read-write STATUS current DESCRIPTION " Nominal tone duration of each single tone in counts of 10ms used with sequential tone detector on VISM DSP. " DEFVAL { 33 } ::= { vismSequentialToneDetectGrp 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.24.1.1.4.3.0 | seqToneDurationOfEachTone | 0 | 0 | seqToneDurationOfEachtone |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.150.24.1.1.4.1 | seqToneNumOfFrequencies | 1 | 1 | The number of single frequencies which have to be detected by the sequential tone detector command on VISM. The frequencies shoul… |
1.3.6.1.4.1.351.150.24.1.1.4.2 | seqToneEventID | 1 | 1 | The eventID corresponding to the sequential frequency. Currently only supports Event 74 (SIT tone) |
1.3.6.1.4.1.351.150.24.1.1.4.4 | seqToneGapBetweenEachTone | 1 | 1 | seqToneGapBetweenEachtone |
1.3.6.1.4.1.351.150.24.1.1.4.5 | seqToneDurationDeviation | 1 | 1 | Tone duration deviation allowed in 10ms used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.6 | seqToneMaximumGapDuration | 1 | 1 | Maximum tone duration allowed in 10ms used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.7 | seqToneGapDurationDeviation | 1 | 1 | Tone duration deviation allowed in 10ms used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.8 | seqToneFreqDeviation | 1 | 1 | Frequency deviation allowed (1 - 1000 Hz) used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.9 | seqTonePowerLevelCeiling | 1 | 1 | Maximum ceiling power level of the sequential frequency tone (absolute value in dBm) used with sequential tone detector on VISM D… |
1.3.6.1.4.1.351.150.24.1.1.4.10 | seqTonePowerLevelFloor | 1 | 1 | Lowest (floor) power level of the sequential frequency tone (absolute value in dBm) used with sequential tone detector on VISM DS… |
1.3.6.1.4.1.351.150.24.1.1.4.11 | seqToneFrequency1 | 1 | 1 | 1st frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.12 | seqToneFrequency2 | 1 | 1 | 2nd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.13 | seqToneFrequency3 | 1 | 1 | 3rd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.14 | seqToneFrequency4 | 1 | 1 | 4th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.15 | seqToneFrequency5 | 1 | 1 | 5th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.16 | seqToneFrequency6 | 1 | 1 | 6th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.17 | seqToneFrequency7 | 1 | 1 | 7th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.18 | seqToneFrequency8 | 1 | 1 | 8th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.19 | seqToneFrequency9 | 1 | 1 | 9th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |
1.3.6.1.4.1.351.150.24.1.1.4.20 | seqToneFrequency10 | 1 | 1 | 10th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP. |