An entry in the IMA Group table.
Parsed from file IMA-MIB.mib
Module: IMA-MIB
An entry in the IMA Group table.
An entry in the IMA Group table.
Parsed from file ima.mib.txt
Company: None
Module: IMA-MIB
An entry in the IMA Group table.
imaGroupEntry OBJECT-TYPE SYNTAX ImaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IMA Group table." INDEX { imaGroupIndex } ::= { imaGroupTable 1 }
imaGroupEntry OBJECT-TYPE SYNTAX ImaGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the IMA Group table." INDEX { imaGroupIndex } ::= { imaGroupTable 1 }
Vendor: ATM Forum
Module: Axd301Ima-SWS
[Automatically extracted from oidview.com]
imaGroupEntry OBJECT-TYPE SYNTAX ImaGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the IMA Group table." INDEX { imaGroupIndex } ::= { imaGroupTable 1 }
imaGroupEntry OBJECT-TYPE SYNTAX ImaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IMA Group table." INDEX { imaGroupIndex } ::= { imaGroupTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.7.1.1.2.1.1 | imaGroupIndex | 0 | 0 | A unique value for the IMA Group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.2 | imaGroupRowStatus | 0 | 0 | The imaGroupRowStatus object allows create and delete operations on imaGroupTable entries. To create a new conceptual row (or ins… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.3 | imaGroupIfIndex | 0 | 0 | This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify correspondin… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.4 | imaGroupNeState | 0 | 0 | The current operational state of the near-end IMA Group State Machine. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.5 | imaGroupFeState | 0 | 0 | The current operational state of the far-end IMA Group State Machine. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.6 | imaGroupFailureStatus | 0 | 0 | The current failure status of the IMA group (the reason why the GTSM is in the down state. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.7 | imaGroupSymmetry | 0 | 0 | Symmetry of the IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.8 | imaGroupMinNumTxLinks | 0 | 0 | Minimum number of transmit links required to be Active for the IMA group to be in the Up state. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.9 | imaGroupMinNumRxLinks | 0 | 0 | Minimum number of receive links required to be Active for the IMA group to be in the Up state. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.10 | imaGroupNeTxClkMode | 0 | 0 | Transmit clocking mode used by the near-end IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.11 | imaGroupFeTxClkMode | 0 | 0 | Transmit clocking mode used by the far-end IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.12 | imaGroupTxTimingRefLink | 0 | 0 | The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer.… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.13 | imaGroupRxTimingRefLink | 0 | 0 | The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer. T… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.14 | imaGroupLastChange | 0 | 0 | The time-of-day the IMA group last changed operational state (i.e., value of imaGroupNeState changed). |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.15 | imaGroupTxImaId | 0 | 0 | The IMA ID currently in use by the near-end IMA function. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.16 | imaGroupRxImaId | 0 | 0 | The IMA ID currently in use by the far-end IMA function. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.17 | imaGroupTxFrameLength | 0 | 0 | The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.18 | imaGroupRxFrameLength | 0 | 0 | Value of IMA frame length as received from remote IMA function. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.19 | imaGroupDiffDelayMax | 0 | 0 | The maximum number of milliseconds of differential delay among the links that will be tolerated on this interface. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.20 | imaGroupLeastDelayLink | 0 | 0 | The ifIndex of the link configured in the IMA group which has the smallest link propagation delay. This value has meaning only if… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.21 | imaGroupDiffDelayMaxObs | 0 | 0 | The latest maximum differential delay observed (in milliseconds) between the links having the least and most link propagation de… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.22 | imaGroupAlphaValue | 0 | 0 | This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the … |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.23 | imaGroupBetaValue | 0 | 0 | This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the I… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.24 | imaGroupGammaValue | 0 | 0 | This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IM… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.25 | imaGroupRunningSecs | 0 | 0 | The amount of time (in seconds) since this IMA group has been in the Operational state. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.26 | imaGroupUnavailSecs | 0 | 0 | Count of one second intervals where the IMA Group Traffic State Machine is Down. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.27 | imaGroupNeNumFailures | 0 | 0 | The number of times a near-end group failure (Config-Abort, Insufficient-Links) has been reported since power-up or reboot. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.28 | imaGroupFeNumFailures | 0 | 0 | The number of times a far-end group failure (Config-Abort-FE, Insufficient-Links-FE, Blocked-FE) has been reported since power-up… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.29 | imaGroupTxAvailCellRate | 0 | 0 | The current cell rate (truncated value in cells per second) provided by this IMA group in the transmit direction, considering all… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.30 | imaGroupRxAvailCellRate | 0 | 0 | The current cell rate (truncated value in cells per second) provided by this IMA group in the receive direction, considering all … |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.31 | imaGroupNumTxCfgLinks | 0 | 0 | The number of links that are configured to transmit in this IMA group. This attribute overwrites the value of the imaGroupNumRxAc… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.32 | imaGroupNumRxCfgLinks | 0 | 0 | The number of links that are configured to receive in this IMA group. This attribute is overwritten by the value of the imaGroupN… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.33 | imaGroupNumTxActLinks | 0 | 0 | The number of links which are configured to transmit and are currently Active in this IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.34 | imaGroupNumRxActLinks | 0 | 0 | The number of links which are configured to receive and are currently Active in this IMA group. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.35 | imaGroupTestLinkIfIndex | 0 | 0 | This object is used to designate an interface as the test link for use in the Test Pattern Procedure. A value of 0 specifies tha… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.36 | imaGroupTestPattern | 0 | 0 | The value of this object is used to specify the Tx Test Pattern in an IMA group loopback operation. A value in the range 0 to 25… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.37 | imaGroupTestProcStatus | 0 | 0 | This object is used to enable or disable the Test Pattern Procedure, and to note whether at least one link failed the test. The t… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.38 | imaGroupValidIntervals | 0 | 0 | The number of previous 15 minute intervals for which valid data was collected. The value will be 96 unless the IMA group table e… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.39 | imaGroupInvalidIntervals | 0 | 0 | The number of intervals for which no valid data is available. This attribute is only mandatory when the IMA Group Interval Statis… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.40 | imaGroupTimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the current measurement period. This attribute is only mandatory… |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.41 | imaGroupTxOamLabelValue | 0 | 0 | IMA OAM Label value transmitted by the NE IMA unit. |
| 1.3.6.1.4.1.353.5.7.1.1.2.1.42 | imaGroupRxOamLabelValue | 0 | 0 | IMA OAM Label value transmitted by the FE IMA unit. The value 0 likely means that the IMA unit has not received an OAM Label fro… |