MPOA Client Actual Table.
A read-only table which contains state
information and reflects the actual values which
these MPOA Clients are using. The actual
values may differ from the configured values.
For example, the mpcConfigMode takes affect
only during (re-)initialization of the MPC.
The MPC-p1 to MPC-p6 parameters may differ
from the configured values because, if the
MPC was (re-)initialized and the mpcConfigMode
was set to automatic (1) then some, perhaps all,
of the MPC-p1 to MPC-p6 parameters were retrieved
from the LECS and the values from the LECS may
differ from the configured/default values of the
mpcConfigTable. NOTE: after re-initialization
a set to an object in the mpcConfigTable which
changes the value of the object will be reflect
in this Table, except for a set to the
mpcConfigMode which takes effect only during
re-initialization.
Parsed from file MPC-MIB.mib
Module: MPC-MIB.mib
MPOA Client Actual Table.
A read-only table which contains state
information and reflects the actual values which
these MPOA Clients are using. The actual
values may differ from the configured values.
For example, the mpcConfigMode takes affect
only during (re-)initialization of the MPC.
The MPC-p1 to MPC-p6 parameters may differ
from the configured values because, if the
MPC was (re-)initialized and the mpcConfigMode
was set to automatic (1) then some, perhaps all,
of the MPC-p1 to MPC-p6 parameters were retrieved
from the LECS and the values from the LECS may
differ from the configured/default values of the
mpcConfigTable. NOTE: after re-initialization
a set to an object in the mpcConfigTable which
changes the value of the object will be reflect
in this Table, except for a set to the
mpcConfigMode which takes effect only during
re-initialization.
MPOA Client Actual Table.
A read-only table which contains state
information and reflects the actual values which
these MPOA Clients are using. The actual
values may differ from the configured values.
For example, the mpcConfigMode takes affect
only during (re-)initialization of the MPC.
The MPC-p1 to MPC-p6 parameters may differ
from the configured values because, if the
MPC was (re-)initialized and the mpcConfigMode
was set to automatic (1) then some, perhaps all,
of the MPC-p1 to MPC-p6 parameters were retrieved
from the LECS and the values from the LECS may
differ from the configured/default values of the
mpcConfigTable. NOTE: after re-initialization
a set to an object in the mpcConfigTable which
changes the value of the object will be reflect
in this Table, except for a set to the
mpcConfigMode which takes effect only during
re-initialization.
Parsed from file MPOA100.MIB.txt
Company: None
Module: MPOA-MIB
MPOA Client Actual Table.
A read-only table which contains state
information and reflects the actual values which
these MPOA Clients are using. The actual
values may differ from the configured values.
For example, the mpcConfigMode takes affect
only during (re-)initialization of the MPC.
The MPC-p1 to MPC-p6 parameters may differ
from the configured values because, if the
MPC was (re-)initialized and the mpcConfigMode
was set to automatic (1) then some, perhaps all,
of the MPC-p1 to MPC-p6 parameters were retrieved
from the LECS and the values from the LECS may
differ from the configured/default values of the
mpcConfigTable. NOTE: after re-initialization
a set to an object in the mpcConfigTable which
changes the value of the object will be reflect
in this Table, except for a set to the
mpcConfigMode which takes effect only during
re-initialization.
mpcActualTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcActualEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPOA Client Actual Table. A read-only table which contains state information and reflects the actual values which these MPOA Clients are using. The actual values may differ from the configured values. For example, the mpcConfigMode takes affect only during (re-)initialization of the MPC. The MPC-p1 to MPC-p6 parameters may differ from the configured values because, if the MPC was (re-)initialized and the mpcConfigMode was set to automatic (1) then some, perhaps all, of the MPC-p1 to MPC-p6 parameters were retrieved from the LECS and the values from the LECS may differ from the configured/default values of the mpcConfigTable. NOTE: after re-initialization a set to an object in the mpcConfigTable which changes the value of the object will be reflect in this Table, except for a set to the mpcConfigMode which takes effect only during re-initialization." ::= { mpcObjects 3 }
mpcActualTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcActualEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "MPOA Client Actual Table. A read-only table which contains state information and reflects the actual values which these MPOA Clients are using. The actual values may differ from the configured values. For example, the mpcConfigMode takes affect only during (re-)initialization of the MPC. The MPC-p1 to MPC-p6 parameters may differ from the configured values because, if the MPC was (re-)initialized and the mpcConfigMode was set to automatic (1) then some, perhaps all, of the MPC-p1 to MPC-p6 parameters were retrieved from the LECS and the values from the LECS may differ from the configured/default values of the mpcConfigTable. NOTE: after re-initialization a set to an object in the mpcConfigTable which changes the value of the object will be reflect in this Table, except for a set to the mpcConfigMode which takes effect only during re-initialization." ::= { mpcObjects 3 }
Vendor: ATM Forum
Module: MPC-MIB
[Automatically extracted from oidview.com]
mpcActualTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcActualEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "MPOA Client Actual Table. A read-only table which contains state information and reflects the actual values which these MPOA Clients are using. The actual values may differ from the configured values. For example, the mpcConfigMode takes affect only during (re-)initialization of the MPC. The MPC-p1 to MPC-p6 parameters may differ from the configured values because, if the MPC was (re-)initialized and the mpcConfigMode was set to automatic (1) then some, perhaps all, of the MPC-p1 to MPC-p6 parameters were retrieved from the LECS and the values from the LECS may differ from the configured/default values of the mpcConfigTable. NOTE: after re-initialization a set to an object in the mpcConfigTable which changes the value of the object will be reflect in this Table, except for a set to the mpcConfigMode which takes effect only during re-initialization." ::= { mpcObjects 3 }
mpcActualTable OBJECT-TYPE SYNTAX SEQUENCE OF MpcActualEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MPOA Client Actual Table. A read-only table which contains state information and reflects the actual values which these MPOA Clients are using. The actual values may differ from the configured values. For example, the mpcConfigMode takes affect only during (re-)initialization of the MPC. The MPC-p1 to MPC-p6 parameters may differ from the configured values because, if the MPC was (re-)initialized and the mpcConfigMode was set to automatic (1) then some, perhaps all, of the MPC-p1 to MPC-p6 parameters were retrieved from the LECS and the values from the LECS may differ from the configured/default values of the mpcConfigTable. NOTE: after re-initialization a set to an object in the mpcConfigTable which changes the value of the object will be reflect in this Table, except for a set to the mpcConfigMode which takes effect only during re-initialization." ::= { mpcObjects 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1 | mpcActualEntry | 8 | 8 | An entry in the MPC Actual Table. An entry represents a specific MPOA Client's state information and the actual values which are b… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.8.1.1.2.1 | mpcNextIndex | 1 | 1 | This object contains an appropriate value to be used for mpcIndex when creating entries in the mpcConfigTable. The value 0 indic… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2 | mpcConfigTable, mpcStatusTable | 1 | 12 | The MPOA Client Configuration Table. This table contains configuration information for all MPOA Clients which this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.2.4 | mpcDataAtmAddressTable | 1 | 3 | A table which shows all the data ATM addresses associated with all MPOA Clients. |
| 1.3.6.1.4.1.353.5.8.1.1.2.5 | mpcStatisticsTable | 1 | 34 | A read-only table which contains statistical information for all MPOA Clients that this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.2.6 | mpcProtocolTable, mpcMPSTable | 1 | 4 | List of protocols, per MPC, for which flow detection is enabled |
| 1.3.6.1.4.1.353.5.8.1.1.2.7 | mpcMappingTable | 1 | 3 | A table mapping the `lecIndex' values of LANE Clients to the `mpcIndex' values of corresponding MPOA Clients. |
| 1.3.6.1.4.1.353.5.8.1.1.2.8 | mpcMpsTable | 1 | 3 | This is a read-only table which contains information about the MPSs that these MPCs know about. |
| 1.3.6.1.4.1.353.5.8.1.1.2.9 | mpcMpsMacAddressTable | 1 | 3 | This is a read-only table which contains information about all the MPSs' MAC Addresses that these MPCs know about. |
| 1.3.6.1.4.1.353.5.8.1.1.2.10 | mpcIngressCacheTxTotalPackets | 1 | 1 | The total number of packets transmitted over MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.11 | mpcIngressCacheTxTotalOctets | 1 | 1 | The total number of octets transmitted over MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12 | mpcIngressCacheTable | 1 | 16 | This table contains information for MPC Caches for the ingress MPC. |
| 1.3.6.1.4.1.353.5.8.1.1.2.13 | mpcEgressCacheRxTotalPackets | 1 | 1 | This counts the total number of packets received by MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.14 | mpcEgressCacheRxTotalOctets | 1 | 1 | This counts the total number of octets received by MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15 | mpcEgressCacheTable | 1 | 14 | This table contains Egress Cache information for all the MPCs which this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.2.16 | mpcMpsObjects | 1 | 5 | None |