Indicates whether this MPS should auto-configure
the next time it is (re-)initialized.
In automatic(1) mode the LECS is contacted and
requests are made for the MPS-p* parameters.
In manual(2) mode, the values of the configuration
parameters are obtained from the mpsConfigTable
and the mpsProtocolTable.
Parsed from file MPOA-MIB.mib
Module: MPOA-MIB
Indicates whether this MPS should auto-configure
the next time it is (re-)initialized.
In automatic(1) mode the LECS is contacted and
requests are made for the MPS-p* parameters.
In manual(2) mode, the values of the configuration
parameters are obtained from the mpsConfigTable
and the mpsProtocolTable.
The MPS Control ATM Address of an MPS.
Parsed from file MPOA100.MIB.txt
Company: None
Module: MPOA-MIB
Indicates whether this MPS should auto-configure
the next time it is (re-)initialized.
In automatic(1) mode the LECS is contacted and
requests are made for the MPS-p* parameters.
In manual(2) mode, the values of the configuration
parameters are obtained from the mpsConfigTable
and the mpsProtocolTable.
mpsConfigMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this MPS should auto-configure the next time it is (re-)initialized. In automatic(1) mode the LECS is contacted and requests are made for the MPS-p* parameters. In manual(2) mode, the values of the configuration parameters are obtained from the mpsConfigTable and the mpsProtocolTable." DEFVAL { automatic } ::= { mpsConfigEntry 3 }
mpsConfigMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this MPS should auto-configure the next time it is (re-)initialized. In automatic(1) mode the LECS is contacted and requests are made for the MPS-p* parameters. In manual(2) mode, the values of the configuration parameters are obtained from the mpsConfigTable and the mpsProtocolTable." DEFVAL { automatic } ::= { mpsConfigEntry 3 }
Vendor: ATM Forum
Module: MPOA-MIB
[Automatically extracted from oidview.com]
mpsActualCtrlAtmAddr OBJECT-TYPE SYNTAX AtmAddr MAX-ACCESS read-only STATUS current DESCRIPTION "The MPS Control ATM Address of an MPS." ::= { mpsStatusEntry 3 }
mpsConfigMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), manual(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether this MPS should auto-configure the next time it is (re-)initialized. In automatic(1) mode the LECS is contacted and requests are made for the MPS-p* parameters. In manual(2) mode, the values of the configuration parameters are obtained from the mpsConfigTable and the mpsProtocolTable." DEFVAL { automatic } ::= { mpsConfigEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.1 | mpsIndex, mpsState | 0 | 0 | A value which uniquely identifies this conceptual row in the mpsConfigTable. The `mpsNextIndex' object needs to be used to deter… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.2 | mpsRowStatus | 0 | 0 | This object allows creation and deletion of MPOA Servers. Within each conceptual mpsConfigTable row, objects which are writable m… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.4 | mpsCtrlAtmAddr, mpsActualAuthType | 0 | 0 | The MPS's Control ATM Address. There exists one Control ATM Address per MPS, therefore, the value of this entry is unique within… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.5 | mpsKeepAliveTime, mpsAuthType | 0 | 0 | MPS-p1 Keep-alive time is max interval between the MPS sending MPOA Keep-Alives in seconds. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.6 | mpsKeepAliveLifeTime | 0 | 0 | MPS-p2 Keep-Alive Lifetime The length of time an MPC may consider a Keep-Alive valid in seconds. This value must be at least thre… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.7 | mpsInitialRetryTime | 0 | 0 | MPS-p4 is initial value in seconds for the MPOA retry mechanism. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.8 | mpsRetryTimeMaximum | 0 | 0 | MPS-p5 cumulative max value in seconds for Retry Time (MPS-p4). |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.9 | mpsGiveupTime | 0 | 0 | MPS-p6 Give Up Time. Minimum time in seconds to wait before giving up on a pending resolution request. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.10 | mpsDefaultHoldingTime | 0 | 0 | MPS-p7 Default Holding Time in minutes. The default Holding Time used in NHRP Resolution Replies. An egress MPS may use local inf… |