Reference record for OID 1.3.6.1.4.1.353.5.8.1.1.3.5.1



parent
1.3.6.1.4.1.353.5.8.1.1.3.5 (mpsProtocolTable)
node code
1
node name
mpsProtocolEntry
dot oid
1.3.6.1.4.1.353.5.8.1.1.3.5.1
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmForum(353) atmForumNetworkManagement(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpsObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmForum(353) atmForumNetworkManagement(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpoaConnectionObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
  • ...skipped...
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) atmForum(353) atmForumNetworkManagment(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpsObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) atmForum(353) atmForumNetworkManagment(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpoaConnectionObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) atmForum(353) atmForumNetworkManagement(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpsObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) atmForum(353) atmForumNetworkManagement(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpoaConnectionObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
  • ...skipped...
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmForum(353) atmForumNetworkManagment(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpsObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmForum(353) atmForumNetworkManagment(5) atmfMpoa(8) mpoaMIB(1) mpoaMIBObjects(1) mpoaConnectionObjects(3) mpsProtocolTable(5) mpsProtocolEntry(1)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/atmForum/atmForumNetworkManagement/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpsObjects/mpsProtocolTable/mpsProtocolEntry
  • /iso/identified-organization/dod/internet/private/enterprise/atmForum/atmForumNetworkManagement/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpoaConnectionObjects/mpsProtocolTable/mpsProtocolEntry
  • ...skipped...
  • /iso/org/dod/internet/private/enterprise/atmForum/atmForumNetworkManagment/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpsObjects/mpsProtocolTable/mpsProtocolEntry
  • /iso/org/dod/internet/private/enterprise/atmForum/atmForumNetworkManagment/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpoaConnectionObjects/mpsProtocolTable/mpsProtocolEntry
  • /iso/org/dod/internet/private/enterprises/atmForum/atmForumNetworkManagement/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpsObjects/mpsProtocolTable/mpsProtocolEntry
  • /iso/org/dod/internet/private/enterprises/atmForum/atmForumNetworkManagement/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpoaConnectionObjects/mpsProtocolTable/mpsProtocolEntry
  • ...skipped...
  • /iso/iso-identified-organization/dod/internet/private/enterprises/atmForum/atmForumNetworkManagment/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpsObjects/mpsProtocolTable/mpsProtocolEntry
  • /iso/iso-identified-organization/dod/internet/private/enterprises/atmForum/atmForumNetworkManagment/atmfMpoa/mpoaMIB/mpoaMIBObjects/mpoaConnectionObjects/mpsProtocolTable/mpsProtocolEntry
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/353/5/8/1/1/3/5/1

    Description by circitor

    Each row indicates one protocol for which an MPS
    will perform MPOA resolution.
    If the LECS was contacted for configuration
    information, and the MPS-p3's control octet is set to Enable,
    0x01, then protocol values retrieved from the LECS are reflected
    in this table and the mpsLECSValue object will be (1) true.
    Also, the user or agent can create rows which
    appropriately correspond to the MPS denoted by mpsIndex,
    and the mpsLECSValue object will be set to (2) false.
    NOTE: if the LECS does not return information for
    the MPS-p3 parameter, or if in manual mode, the user or agent
    should create at least one entry for the corresponding MPS.
    Both, LECS and user and/or agent created rows may exist in
    this Table.

    Parsed from file MPOA-MIB.mib
    Module: MPOA-MIB

    Description by cisco_v1

    Each row indicates one protocol for which an MPS
    will perform MPOA resolution.
    If the LECS was contacted for configuration
    information, and the MPS-p3's control octet is set to Enable,
    0x01, then protocol values retrieved from the LECS are reflected
    in this table and the mpsLECSValue object will be (1) true.
    Also, the user or agent can create rows which
    appropriately correspond to the MPS denoted by mpsIndex,
    and the mpsLECSValue object will be set to (2) false.
    NOTE: if the LECS does not return information for
    the MPS-p3 parameter, or if in manual mode, the user or agent
    should create at least one entry for the corresponding MPS.
    Both, LECS and user and/or agent created rows may exist in
    this Table.

    Description by mibdepot

    Each row indicates one protocol for which an MPS
    will perform MPOA resolution.
    If the LECS was contacted for configuration
    information, and the MPS-p3's control octet is set to Enable,
    0x01, then protocol values retrieved from the LECS are reflected
    in this table and the mpsLECSValue object will be (1) true.
    Also, the user or agent can create rows which
    appropriately correspond to the MPS denoted by mpsIndex,
    and the mpsLECSValue object will be set to (2) false.
    NOTE: if the LECS does not return information for
    the MPS-p3 parameter, or if in manual mode, the user or agent
    should create at least one entry for the corresponding MPS.
    Both, LECS and user and/or agent created rows may exist in
    this Table.

    Parsed from file MPOA100.MIB.txt
    Company: None
    Module: MPOA-MIB

    Description by cisco

    Each row indicates one protocol for which an MPS
    will perform MPOA resolution.
    If the LECS was contacted for configuration
    information, and the MPS-p3's control octet is set to Enable,
    0x01, then protocol values retrieved from the LECS are reflected
    in this table and the mpsLECSValue object will be (1) true.
    Also, the user or agent can create rows which
    appropriately correspond to the MPS denoted by mpsIndex,
    and the mpsLECSValue object will be set to (2) false.
    NOTE: if the LECS does not return information for
    the MPS-p3 parameter, or if in manual mode, the user or agent
    should create at least one entry for the corresponding MPS.
    Both, LECS and user and/or agent created rows may exist in
    this Table.

    Information by circitor

    mpsProtocolEntry OBJECT-TYPE
    SYNTAX MpsProtocolEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each row indicates one protocol for which an MPS
        will perform MPOA resolution.
        If the LECS was contacted for configuration
        information, and the MPS-p3's control octet is set to Enable,
        0x01, then protocol values retrieved from the LECS are reflected
        in this table and the mpsLECSValue object will be (1) true.
        Also, the user or agent can create rows which
        appropriately correspond to the MPS denoted by mpsIndex,
        and the mpsLECSValue object will be set to (2) false.
        NOTE:  if the LECS does not return information for
        the MPS-p3 parameter, or if in manual mode, the user or agent
        should create at least one entry for the corresponding MPS.
        Both, LECS and user and/or agent created rows may exist in
        this Table."
    INDEX { mpsIndex, mpsInternetworkLayerProtocol }
    ::= { mpsProtocolTable 1 }

    Information by cisco_v1

    mpsProtocolEntry OBJECT-TYPE
    SYNTAX MpsProtocolEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each row indicates one protocol for which an MPS
        will perform MPOA resolution.
        If the LECS was contacted for configuration
        information, and the MPS-p3's control octet is set to Enable,
        0x01, then protocol values retrieved from the LECS are reflected
        in this table and the mpsLECSValue object will be (1) true.
        Also, the user or agent can create rows which
        appropriately correspond to the MPS denoted by mpsIndex,
        and the mpsLECSValue object will be set to (2) false.
        NOTE:  if the LECS does not return information for
        the MPS-p3 parameter, or if in manual mode, the user or agent
        should create at least one entry for the corresponding MPS.
        Both, LECS and user and/or agent created rows may exist in
        this Table."
    INDEX { mpsIndex, mpsInternetworkLayerProtocol }
    ::= { mpsProtocolTable 1 }

    Information by oid_info

    Vendor: ATM Forum
    Module: MPOA-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    mpsProtocolEntry OBJECT-TYPE
    SYNTAX MpsProtocolEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each row indicates one protocol for which an MPS
        will perform MPOA resolution.
        If the LECS was contacted for configuration
        information, and the MPS-p3's control octet is set to Enable,
        0x01, then protocol values retrieved from the LECS are reflected
        in this table and the mpsLECSValue object will be (1) true.
        Also, the user or agent can create rows which
        appropriately correspond to the MPS denoted by mpsIndex,
        and the mpsLECSValue object will be set to (2) false.
        NOTE:  if the LECS does not return information for
        the MPS-p3 parameter, or if in manual mode, the user or agent
        should create at least one entry for the corresponding MPS.
        Both, LECS and user and/or agent created rows may exist in
        this Table."
    INDEX { mpsIndex, mpsInternetworkLayerProtocol }
    ::= { mpsProtocolTable 1 }

    Information by cisco

    mpsProtocolEntry OBJECT-TYPE
        SYNTAX    MpsProtocolEntry
        MAX-ACCESS     not-accessible
        STATUS    current
        DESCRIPTION
             "Each row indicates one protocol for which an MPS
             will perform MPOA resolution.
             If the LECS was contacted for configuration
             information, and the MPS-p3's control octet is set to Enable,
             0x01, then protocol values retrieved from the LECS are reflected
             in this table and the mpsLECSValue object will be (1) true.
             Also, the user or agent can create rows which
             appropriately correspond to the MPS denoted by mpsIndex,
             and the mpsLECSValue object will be set to (2) false.
             NOTE:  if the LECS does not return information for
             the MPS-p3 parameter, or if in manual mode, the user or agent
             should create at least one entry for the corresponding MPS.
             Both, LECS and user and/or agent created rows may exist in
             this Table."
        INDEX          {    mpsIndex,
                       mpsInternetworkLayerProtocol
                  }
        ::= {mpsProtocolTable 1 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.353)

    McCloghrie Keith

    Children (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.353.5.8.1.1.3.5.1.1 mpsInternetworkLayerProtocol, mpsFlowDetectProtocol 0 0 MPS-p3 A protocol on which to perform MPOA resolution.
    1.3.6.1.4.1.353.5.8.1.1.3.5.1.2 mpsLECSValue 0 0 This object reflects if the current entry is due to
    a retrieval from the LECS or not. If this entry is
    due to the LECS, then tru…
    1.3.6.1.4.1.353.5.8.1.1.3.5.1.3 mpsProtocolRowStatus, mpsProtocolAddress 0 0 This object allows network managers to enable
    resolution for the `mpsInternetworkLayerProtocol'.