Window size specifies the window size used on each virtual call.
On each outgoing call, the WANServer sets the window size in the Call Request packet, as follows:
- on IPX-Out and PAD calls, the WANServer requests a window size of 2.
- on Bridge and Router calls, the WANServer requests the window size in the configuration tables. The values used for the call are those signaled by the network in the Call Confirmation packet.
On each incoming call, the WANServer accepts the window size requested in the Incoming call packet. If no values are signaled, the WANServer sets the values as follows:
- on IPX-In and SLIP calls, the WANServer uses a window size of 2.
- on Bridge and Router calls, the WANServer uses the window size specified in the configuration tables.
Parsed from file pacesetter70-soho.mib.txt
Company: adc_kentrox
Module: PACESETTER-COMMON-MIB
Vendor: ADC Kentrox
Module: PACESETTER-COMMON-MIB (pacesetter-cellworx.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
2..7 )
Automatically extracted from www.mibdepot.com
x25OperWindowSize OBJECT-TYPE SYNTAX INTEGER (2..7) ACCESS read-only STATUS mandatory DESCRIPTION "Window size specifies the window size used on each virtual call. On each outgoing call, the WANServer sets the window size in the Call Request packet, as follows: - on IPX-Out and PAD calls, the WANServer requests a window size of 2. - on Bridge and Router calls, the WANServer requests the window size in the configuration tables. The values used for the call are those signaled by the network in the Call Confirmation packet. On each incoming call, the WANServer accepts the window size requested in the Incoming call packet. If no values are signaled, the WANServer sets the values as follows: - on IPX-In and SLIP calls, the WANServer uses a window size of 2. - on Bridge and Router calls, the WANServer uses the window size specified in the configuration tables." ::= { x25OperEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.358.4.4.1.1.1.1.1 | x25OperPortIndex | 0 | 0 | A unique value for each port. The interface associated with a particular value of this object is the same interface as identif… |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.2 | x25OperLAPBExtended | 0 | 0 | LAPB extended numbering (SABME) supports extended sequence numbers for efficient operation across media that have long delays, … |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.3 | x25OperDTEDCEMode | 0 | 0 | DTE/DCE mode specifies whether the port is operating as a DTE or DCE at the X.25 link and packet layers. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.4 | x25OperT1AckTimer | 0 | 0 | LAPB Timer T1 that controls retransmission of unacknowledged frames. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.5 | x25OperT3IdleTimer | 0 | 0 | LAPB Timer T3 that controls determination of whether link is operational. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.6 | x25OperN2RetransmissionCount | 0 | 0 | LAPB parameter N2 that controls retransmission of frame before determination of whether link is operational. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.7 | x25OperKLAPBWindowSize | 0 | 0 | LAPB parameter K that specifies the maximum number of outstanding I frames. Value is fixed at 7 for non-extended numbering. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.8 | x25OperN1MaxFrameSize | 0 | 0 | LAPB parameter N1 that specifies the maximum number of bits in an I frame. Value is calculated by the WANServer based on the v… |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.9 | x25OperPacketSize | 0 | 0 | Packet size specifies the maximum packet size. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.11 | x25OperCUGSupported | 0 | 0 | Specifies whether or not the Closed User Group facility is supported. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.12 | x25OperNUISupported | 0 | 0 | Specifies whether or not the Network User Identity facility is supported. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.13 | x25OperReverseChargingRequired | 0 | 0 | Specifies whether or not the Reverse Charging facility is required. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.14 | x25OperOneWayInVCBase | 0 | 0 | Lowest incoming channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.15 | x25OperNmOneWayInVCs | 0 | 0 | Max. number of incoming channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.16 | x25OperTwoWayVCBase | 0 | 0 | Lowest two-way channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.17 | x25OperNmTwoWayVCs | 0 | 0 | Max. number of two-way channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.18 | x25OperOneWayOutVCBase | 0 | 0 | Lowest outgoing channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.19 | x25OperNmOneWayOutVCs | 0 | 0 | Max. number of outgoing channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.20 | x25OperX121Address | 0 | 0 | X.121 address assigned to port by X.25 service supplier. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.22 | x25OperCallingAddressModification | 0 | 0 | Specifies whether or not the WANServer modifies the calling address field in incoming call packets. |