LAPB parameter N2 that controls retransmission of frame before determination of whether link is operational.
Parsed from file pacesetter70-soho.mib.txt
Company: adc_kentrox
Module: PACESETTER-COMMON-MIB
Vendor: ADC Kentrox
Module: PACESETTER-COMMON-MIB (pacesetter-cellworx.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
1..255 )
Automatically extracted from www.mibdepot.com
x25OperN2RetransmissionCount OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "LAPB parameter N2 that controls retransmission of frame before determination of whether link is operational." ::= { x25OperEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.358.4.4.1.1.1.1.1 | x25OperPortIndex | 0 | 0 | A unique value for each port. The interface associated with a particular value of this object is the same interface as identif… |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.2 | x25OperLAPBExtended | 0 | 0 | LAPB extended numbering (SABME) supports extended sequence numbers for efficient operation across media that have long delays, … |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.3 | x25OperDTEDCEMode | 0 | 0 | DTE/DCE mode specifies whether the port is operating as a DTE or DCE at the X.25 link and packet layers. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.4 | x25OperT1AckTimer | 0 | 0 | LAPB Timer T1 that controls retransmission of unacknowledged frames. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.5 | x25OperT3IdleTimer | 0 | 0 | LAPB Timer T3 that controls determination of whether link is operational. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.7 | x25OperKLAPBWindowSize | 0 | 0 | LAPB parameter K that specifies the maximum number of outstanding I frames. Value is fixed at 7 for non-extended numbering. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.8 | x25OperN1MaxFrameSize | 0 | 0 | LAPB parameter N1 that specifies the maximum number of bits in an I frame. Value is calculated by the WANServer based on the v… |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.9 | x25OperPacketSize | 0 | 0 | Packet size specifies the maximum packet size. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.10 | x25OperWindowSize | 0 | 0 | Window size specifies the window size used on each virtual call. On each outgoing call, the WANServer sets the window size in th… |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.11 | x25OperCUGSupported | 0 | 0 | Specifies whether or not the Closed User Group facility is supported. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.12 | x25OperNUISupported | 0 | 0 | Specifies whether or not the Network User Identity facility is supported. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.13 | x25OperReverseChargingRequired | 0 | 0 | Specifies whether or not the Reverse Charging facility is required. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.14 | x25OperOneWayInVCBase | 0 | 0 | Lowest incoming channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.15 | x25OperNmOneWayInVCs | 0 | 0 | Max. number of incoming channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.16 | x25OperTwoWayVCBase | 0 | 0 | Lowest two-way channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.17 | x25OperNmTwoWayVCs | 0 | 0 | Max. number of two-way channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.18 | x25OperOneWayOutVCBase | 0 | 0 | Lowest outgoing channel. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.19 | x25OperNmOneWayOutVCs | 0 | 0 | Max. number of outgoing channels. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.20 | x25OperX121Address | 0 | 0 | X.121 address assigned to port by X.25 service supplier. |
| 1.3.6.1.4.1.358.4.4.1.1.1.1.22 | x25OperCallingAddressModification | 0 | 0 | Specifies whether or not the WANServer modifies the calling address field in incoming call packets. |