Internal Cache Flush Interval for Logical Drives in WriteBack
Mode.
Parsed from file RAID-Adapter-MIB.mib
Module: RAID-Adapter-MIB
Vendor: Dell
Module: RAID-Adapter-MIB (Perc.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
0..100 )
Automatically extracted from www.mibdepot.com
flushInterval OBJECT-TYPE SYNTAX INTEGER { twoSec(2), fourSec(4), sixSec(6), eightSec(8), tenSec(10) } ACCESS read-write STATUS optional DESCRIPTION "Internal Cache Flush Interval for Logical Drives in WriteBack Mode." ::= { adapterEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3582.1.1.1.1.1 | adpAdapterNumber | 0 | 0 | The Adapter Number for this Instance of Adapter Object. This Entry in the Table, contains Information about the Adapter Number sp… |
| 1.3.6.1.4.1.3582.1.1.1.1.2 | numLogicalDrives | 0 | 0 | Number of Logical Drives Configured on this Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.3 | firmwareVersion | 0 | 0 | The Firmware Version of the Firmware running on this Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.4 | biosVersion | 0 | 0 | The Bios Version of the BIOS Present in the Flash ROM on this Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.5 | dramSizeInMB | 0 | 0 | Amount of DRAM in Mega Bytes present on this Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.6 | chipSetType, rebuildRateInPercent | 0 | 0 | Rebuild Rate for this Adapter. This determines the Priority of Rebuild/Check-Consistency/Reconstruct Operations versus the Read-W… |
| 1.3.6.1.4.1.3582.1.1.1.1.8 | flushInterval, maxConcurrentCmds | 0 | 0 | Maximum Concurrent Commands Supported by the Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.9 | maxConcurrentCmds, spinupDelay | 0 | 0 | This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Gr… |
| 1.3.6.1.4.1.3582.1.1.1.1.10 | spinupDelay, spinupCount | 0 | 0 | This is the Spinup Count for Spinning up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Gr… |
| 1.3.6.1.4.1.3582.1.1.1.1.11 | spinupCount, adpIOReadsPerSec | 0 | 0 | Number of IO Reads/sec statistics for this adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.12 | adpIOReadsPerSec, adpIOWritesPerSec | 0 | 0 | Number of IO Writes/sec statistics for this adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.13 | adpIOWritesPerSec, adpReadKBsPerSec | 0 | 0 | Amount of Data Transferred in KBs/sec due to READ Transfers. |
| 1.3.6.1.4.1.3582.1.1.1.1.14 | adpReadKBsPerSec, adpWriteKBsPerSec | 0 | 0 | Amount of Data Transferred in KBs/sec due to WRITE Transfers. |
| 1.3.6.1.4.1.3582.1.1.1.1.15 | adpWriteKBsPerSec, adpReadFailuresPerSec | 0 | 0 | Number of Read-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.16 | adpReadFailuresPerSec, adpWriteFailuresPerSec | 0 | 0 | Number of Write-Failures/sec statistics for this adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.17 | adpWriteFailuresPerSec, scanChannels | 0 | 0 | Use this Variable to Discover the Non-Disk Devices attached to the Adapter. Set this Variable to startscan (an integer value of 2… |
| 1.3.6.1.4.1.3582.1.1.1.1.18 | scanChannels, adpBasePort | 0 | 0 | Maximum Concurrent Commands Supported by the Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.19 | numSCSIChannels | 0 | 0 | Maximum number of SCSI Channels Supported by the Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.20 | numFCLoops | 0 | 0 | Number of Fibre channel loops Supported by the Adapter. |
| 1.3.6.1.4.1.3582.1.1.1.1.21 | subSystemID | 0 | 0 | The PCI sub system ID of this controller |
| 1.3.6.1.4.1.3582.1.1.1.1.22 | subSystemVendorID | 0 | 0 | The PCI sub system vendor ID of this controller |
| 1.3.6.1.4.1.3582.1.1.1.1.23 | productName | 0 | 0 | The enriched formation of the controller retrieved from the firmware |
| 1.3.6.1.4.1.3582.1.1.1.1.24 | adpSpeed | 0 | 0 | Maximum transfer speed of the adapter. |