Used to disable the lobe port during network troubleshooting.
If set to disabled(2), the lobe port is forced to wrap.
This object must be set to enabled(1) for normal operation.
The value of this object is maintained across power cycles
and resets.
Parsed from file DEChub900-TokenRing.mib.txt
Company: None
Module: DECHUB900-PTRM-MIB-V3-0
Used to disable the lobe port during network troubleshooting.
If set to disabled(2), the lobe port is forced to wrap.
This object must be set to enabled(1) for normal operation.
The value of this object is maintained across power cycles
and resets.
Parsed from file DECHUB900-PTRM-MIB-V3-0.mib
Module: DECHUB900-PTRM-MIB-V3-0
Vendor: DEC
Module: DECHUB900-PTRM-MIB-V3-0
[Automatically extracted from oidview.com]
ptrmLobeAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to disable the lobe port during network troubleshooting. If set to disabled(2), the lobe port is forced to wrap. This object must be set to enabled(1) for normal operation. The value of this object is maintained across power cycles and resets." ::= { ptrmLobeEntry 3 }
ptrmLobeAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Used to disable the lobe port during network troubleshooting. If set to disabled(2), the lobe port is forced to wrap. This object must be set to enabled(1) for normal operation. The value of this object is maintained across power cycles and resets." ::= { ptrmLobeEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.11.3.3.1.1 | ptrmLobeIndex | 0 | 0 | Port number for the lobe, as it appears externally to the user, i.e. 1 for the port labeled '1'. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.2 | ptrmLobeOperStatus | 0 | 0 | Indicates whether the lobe port is wrapped or inserted into the linecard's internal ring. If the lobe port is not implemented in… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.4 | ptrmLobeMedia | 0 | 0 | The media type of the lobe port. Different module types have different lobe connectors. If a module implements an STP/UTP switc… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.5 | ptrmLobeAutoWrapEnable | 0 | 0 | Software configuration variable set by network management. Auto Wrap Enabled (AWE) should be set on(1) for connection to end stat… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.6 | ptrmLobeAutoPartitionStatus | 0 | 0 | Indicates whether the lobe port has been auto-partitioned. When autoPartitioned(2), a lobe is automatically wrapped. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.7 | ptrmLobeDetectedSpeed | 0 | 0 | Indicates the speed detected on the incoming data pair. If invalid(1) a valid token ring speed was not detected. If notApplicable… |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.8 | ptrmLobePhantomDrive | 0 | 0 | This variable is not applicable to lobe ports, and is defined only as a place holder for the corresponding trunk variable. |
| 1.3.6.1.4.1.36.2.18.11.3.3.1.9 | ptrmLobePhantomDetect | 0 | 0 | Indicates the state of the incoming phantom current detect circuit for the lobe port. Lobe ports are required to implement phant… |