This object is used to control the program load process of
a device. When read, the value other(1) is returned.
When set to start-reboot (2) the device reloads the stored
firmware.
When set to start-read-BootP(3) the device clears the
address and host configuration file location in NVRAM and
initiates a BootP read operation to find and read a new
program image.
When set to start-read-TFTP(4) the device saves the local host
address and host configuration file location in NVRAM and
initiates a TFTP read operation to read a new program image.
A device always resets during a successful load attempt.
It may not reset upon unsuccessful completion of the load attempt.
Parsed from file GSatm-Chassis.mib.V.txt
Company: None
Module: DEC-ATM-CHASSIS-MIB
This object is used to control the program load process of
a device. When read, the value other(1) is returned.
When set to start-reboot (2) the device reloads the stored
firmware.
When set to start-read-BootP(3) the device clears the
address and host configuration file location in NVRAM and
initiates a BootP read operation to find and read a new
program image.
When set to start-read-TFTP(4) the device saves the local host
address and host configuration file location in NVRAM and
initiates a TFTP read operation to read a new program image.
A device always resets during a successful load attempt.
It may not reset upon unsuccessful completion of the load attempt.
Parsed from file DEC-ATM-CHASSIS-MIB.mib
Module: DEC-ATM-CHASSIS-MIB
Vendor: DEC
Module: DEC-ATM-CHASSIS-MIB
[Automatically extracted from oidview.com]
decAtmLoadAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), start-reboot (2), start-read-BootP (3), start-read-TFTP (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to control the program load process of a device. When read, the value other(1) is returned. When set to start-reboot (2) the device reloads the stored firmware. When set to start-read-BootP(3) the device clears the address and host configuration file location in NVRAM and initiates a BootP read operation to find and read a new program image. When set to start-read-TFTP(4) the device saves the local host address and host configuration file location in NVRAM and initiates a TFTP read operation to read a new program image. A device always resets during a successful load attempt. It may not reset upon unsuccessful completion of the load attempt." ::= { decAtmLoad 1 }
decAtmLoadAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), start-reboot (2), start-read-BootP (3), start-read-TFTP (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to control the program load process of a device. When read, the value other(1) is returned. When set to start-reboot (2) the device reloads the stored firmware. When set to start-read-BootP(3) the device clears the address and host configuration file location in NVRAM and initiates a BootP read operation to find and read a new program image. When set to start-read-TFTP(4) the device saves the local host address and host configuration file location in NVRAM and initiates a TFTP read operation to read a new program image. A device always resets during a successful load attempt. It may not reset upon unsuccessful completion of the load attempt." ::= { decAtmLoad 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.30.1.12.1.1.0 | decAtmLoadAdminStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.30.1.12.1.2 | decAtmLoadOperStatus | 1 | 1 | The final state of the last load attempt. none(1) indicates that no load has been attempted, ever. This object is non-volatile… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.3 | decAtmLoadFilename | 1 | 1 | The name of the file in which to load. When the device is reading, this is the name of the file to be read. If the device can no… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.4 | decAtmLoadIpHostAddr | 1 | 1 | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read … |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.5 | decAtmLoadDevSpecific | 1 | 1 | A device specific parameter which may be used to indicate detailed error information about the last attempted load. This object i… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.6 | decAtmConfigIpHostAddr | 1 | 1 | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read … |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.7 | decAtmConfigDefaultGateway | 1 | 1 | IP address of default gateway (router) to use if file IP address is off LAN. If this value is NOT set, no default will be used. t… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.8 | decAtmConfigFilename | 1 | 1 | The name of the file to read or write. When the device is reading, this is the name of the file to be read. When the device is … |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.9 | decAtmConfigStatus | 1 | 1 | This object is used to control the reading and writing of Nvram. When read, the value (1) is returned if no decAtmConfigStatus a… |