This object is used to control the reading and writing of
Nvram. When read, the value (1) is returned if no
decAtmConfigStatus action has been initiated since the last
reboot. If a 'start-read' operation has been initiated, then
a 'start-read-inprogress' will be returned until the start-read
is complete, then a 'start-read-complete' will be returned.
If a 'start-write' operation has been initiated, then
a 'start-write-inprogress' will be returned until the start-write
is complete, then a 'start-write-complete' will be returned.
When set to start-read(2) the device initiates a TFTP read
operation to read the saved Nvram image. When set to
start-write(3) the device checks to ensure that the file name
that the Nvram image will be saved in does not exist. If this
test is successful, a TFTP write operation will save the
configuration.
Parsed from file GSatm-Chassis.mib.V.txt
Company: None
Module: DEC-ATM-CHASSIS-MIB
This object is used to control the reading and writing of
Nvram. When read, the value (1) is returned if no
decAtmConfigStatus action has been initiated since the last
reboot. If a 'start-read' operation has been initiated, then
a 'start-read-inprogress' will be returned until the start-read
is complete, then a 'start-read-complete' will be returned.
If a 'start-write' operation has been initiated, then
a 'start-write-inprogress' will be returned until the start-write
is complete, then a 'start-write-complete' will be returned.
When set to start-read(2) the device initiates a TFTP read
operation to read the saved Nvram image. When set to
start-write(3) the device checks to ensure that the file name
that the Nvram image will be saved in does not exist. If this
test is successful, a TFTP write operation will save the
configuration.
Parsed from file DEC-ATM-CHASSIS-MIB.mib
Module: DEC-ATM-CHASSIS-MIB
Vendor: DEC
Module: DEC-ATM-CHASSIS-MIB
[Automatically extracted from oidview.com]
decAtmConfigStatus OBJECT-TYPE SYNTAX INTEGER { other(1), start-read(2), start-write(3), start-read-inprogress(4), start-read-complete(5), start-write-inprogress(6), start-write-complete(7), read-error(8), write-error(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to control the reading and writing of Nvram. When read, the value (1) is returned if no decAtmConfigStatus action has been initiated since the last reboot. If a 'start-read' operation has been initiated, then a 'start-read-inprogress' will be returned until the start-read is complete, then a 'start-read-complete' will be returned. If a 'start-write' operation has been initiated, then a 'start-write-inprogress' will be returned until the start-write is complete, then a 'start-write-complete' will be returned. When set to start-read(2) the device initiates a TFTP read operation to read the saved Nvram image. When set to start-write(3) the device checks to ensure that the file name that the Nvram image will be saved in does not exist. If this test is successful, a TFTP write operation will save the configuration." ::= { decAtmLoad 9 }
decAtmConfigStatus OBJECT-TYPE SYNTAX INTEGER { other(1), start-read(2), start-write(3), start-read-inprogress(4), start-read-complete(5), start-write-inprogress(6), start-write-complete(7), read-error(8), write-error(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to control the reading and writing of Nvram. When read, the value (1) is returned if no decAtmConfigStatus action has been initiated since the last reboot. If a 'start-read' operation has been initiated, then a 'start-read-inprogress' will be returned until the start-read is complete, then a 'start-read-complete' will be returned. If a 'start-write' operation has been initiated, then a 'start-write-inprogress' will be returned until the start-write is complete, then a 'start-write-complete' will be returned. When set to start-read(2) the device initiates a TFTP read operation to read the saved Nvram image. When set to start-write(3) the device checks to ensure that the file name that the Nvram image will be saved in does not exist. If this test is successful, a TFTP write operation will save the configuration." ::= { decAtmLoad 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.30.1.12.1.9.0 | decAtmConfigStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.30.1.12.1.1 | decAtmLoadAdminStatus | 1 | 1 | This object is used to control the program load process of a device. When read, the value other(1) is returned. When set to star… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.2 | decAtmLoadOperStatus | 1 | 1 | The final state of the last load attempt. none(1) indicates that no load has been attempted, ever. This object is non-volatile… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.3 | decAtmLoadFilename | 1 | 1 | The name of the file in which to load. When the device is reading, this is the name of the file to be read. If the device can no… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.4 | decAtmLoadIpHostAddr | 1 | 1 | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read … |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.5 | decAtmLoadDevSpecific | 1 | 1 | A device specific parameter which may be used to indicate detailed error information about the last attempted load. This object i… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.6 | decAtmConfigIpHostAddr | 1 | 1 | The IP address of the host from which to load. When the device is reading, this is the IP address of the host in which the read … |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.7 | decAtmConfigDefaultGateway | 1 | 1 | IP address of default gateway (router) to use if file IP address is off LAN. If this value is NOT set, no default will be used. t… |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.8 | decAtmConfigFilename | 1 | 1 | The name of the file to read or write. When the device is reading, this is the name of the file to be read. When the device is … |