Vendor: DEC
Module: RoamAbout-MIB
[Automatically extracted from oidview.com]
roamaboutLoader OBJECT IDENTIFIER ::= { roamabout 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.35.16.1 | rabtFirmwareUseBootp | 0 | 0 | Controls where the AccessPoint gets the information that it needs to download new firmware. When true(1), indicates that the AP s… |
| 1.3.6.1.4.1.36.2.18.35.16.2 | rabtFirmwareServerIP | 0 | 0 | The IP address of the TFTP server that should be used for firmware downloads. This value will be ignored when 'rabtFirmwareUseBoo… |
| 1.3.6.1.4.1.36.2.18.35.16.3 | rabtFirmwareFilename | 0 | 0 | The name of the remote file that contains the firmware to be downloaded. This value will be ignored when 'rabtFirmwareUseBootp' i… |
| 1.3.6.1.4.1.36.2.18.35.16.4 | rabtFirmwareStatus | 0 | 0 | Indicates the success or failure of the AccessPoint's most recent attempt to download new firmware. In the case of a failure, th… |
| 1.3.6.1.4.1.36.2.18.35.16.5 | rabtCrashUploadUseBootp | 0 | 0 | Controls where the AccessPoint gets the information that it needs to upload crash dumps. When true(1), indicates that the AP shou… |
| 1.3.6.1.4.1.36.2.18.35.16.6 | rabtCrashUploadServerIP | 0 | 0 | The IP address of the TFTP server that should be used for crash dump uploads. This value will be ignored when 'rabtCrashUploadUse… |
| 1.3.6.1.4.1.36.2.18.35.16.7 | rabtCrashUploadDirectory | 0 | 0 | The name of the remote directory to which all crash dumps should be uploaded. This value will be ignored when 'rabtCrashUploadUse… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.35.1 | rabtPCCardType | 0 | 0 | The type of PC card inserted in the Access Point. |
| 1.3.6.1.4.1.36.2.18.35.2 | rabtIPAddressState | 0 | 0 | Determines the state of IP Address storage. A value of 2 causes the current IP address to be stored in NVRAM. |
| 1.3.6.1.4.1.36.2.18.35.3 | rabtBridgeMode | 0 | 0 | CURRENT Access Point bridge mode state. LAN-to-LAN mode is the improved name for 802.11. LAN-to-LAN used to be called full-brid… |
| 1.3.6.1.4.1.36.2.18.35.4 | rabtUplineDumpMode | 0 | 0 | Determines whether or not a dump file is created on an Access Point crash. |
| 1.3.6.1.4.1.36.2.18.35.5 | rabtMemorySize | 0 | 0 | The size of the memory in the Access Point in Mbytes. |
| 1.3.6.1.4.1.36.2.18.35.6 | rabtUpgradeFlash | 0 | 0 | Causes the Access Point to attempt a flash upgrade. Be aware that this causes the Access Point to reset. |
| 1.3.6.1.4.1.36.2.18.35.7 | rabtForceUplineDump | 0 | 0 | Causes the Access Point to attempt a upline dump. Be aware that this causes the Access Point to reset. |
| 1.3.6.1.4.1.36.2.18.35.8 | rabtStationName | 0 | 0 | The wireless station name sent out as part of the beacon messages. Valid only when a DS card is inserted in the Access Point. |
| 1.3.6.1.4.1.36.2.18.35.9 | rabtIPSubnetMask | 0 | 0 | The IP subnet mask for this access Point. |
| 1.3.6.1.4.1.36.2.18.35.10 | rabtDSChannel | 0 | 0 | The channel number for the wireless non-IEEE 2400DS card. This value is only valid currently if a 2400DS card is installed. Afte… |
| 1.3.6.1.4.1.36.2.18.35.11 | rabtDSCountryVariant | 0 | 0 | Describes the country variant of the 2400DS card. This value is only valid currently if a 2400DS card is installed. |
| 1.3.6.1.4.1.36.2.18.35.12 | rabtDSCurrentNWID | 0 | 0 | The WaveLAN Network ID (NWID) this RF-modem is currently operating with. |
| 1.3.6.1.4.1.36.2.18.35.13 | rabtEncryptionEnable | 0 | 0 | Used to enable or disable encryption of the wireless radio signals if the installed PC Card supports encryption, and the Access P… |
| 1.3.6.1.4.1.36.2.18.35.14 | rabtPTPDiag | 9 | 9 | None |
| 1.3.6.1.4.1.36.2.18.35.15 | rabtDot11 | 5 | 56 | None |
| 1.3.6.1.4.1.36.2.18.35.17 | roamaboutConsole | 1 | 1 | None |