This object is being replaced by the switch port object gsESwitchPortFastStart.
When this bridge port object is set to enable(1), the bridge port and all other
bridge ports on the same switch port, transition right from blocking to forwarding,
skipping the listening and learning states. When this bridge port object is set
to disable(2), the bridge port and all other bridge ports on the same switch port
have this option disabled. The user should be warned that using the fast start
feature greatly increases the likelihood of unintended network loops that would
otherwise be prevented by participating in the normal spanning tree algorithm.
The factory default value for this object is disable(2).
Parsed from file GIGAswitchEthernet-MIB.mib
Module: GIGAswitchEthernet-MIB
Vendor: DEC
Module: GIGAswitchEthernet-MIB
[Automatically extracted from oidview.com]
gsEBridgePortFastStart OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS deprecated DESCRIPTION "This object is being replaced by the switch port object gsESwitchPortFastStart. When this bridge port object is set to enable(1), the bridge port and all other bridge ports on the same switch port, transition right from blocking to forwarding, skipping the listening and learning states. When this bridge port object is set to disable(2), the bridge port and all other bridge ports on the same switch port have this option disabled. The user should be warned that using the fast start feature greatly increases the likelihood of unintended network loops that would otherwise be prevented by participating in the normal spanning tree algorithm. The factory default value for this object is disable(2)." ::= { gsEBridgePortEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.1 | gsEBridgePortIndex | 0 | 0 | An index that uniquely identifies this bridge port. This index corresponds to the gsEResourceIndex for bridge port type resourc… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.2 | gsEBridgePortPriority | 0 | 0 | The value of the priority field in the port ID. See dot1dStpPortPriority. The default value is 128. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.3 | gsEBridgePortState | 0 | 0 | The port's current state as defined by the Spanning Tree Protocol. See dot1dStpPortState. The virtual port is considered broken … |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.4 | gsEBridgePortEnable | 0 | 0 | The enabled/disabled status of this port. See dot1dStpPortEnable. The default is enabled(2). |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.5 | gsEBridgePortPathCost | 0 | 0 | The contribution of this port to the path cost of the paths towards the spanning tree root. See dot1dStpPortPathCost. The defau… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.6 | gsEBridgePortDesignatedRoot | 0 | 0 | The bridge recorded as root for this port's segment. See dot1dStpPortDesignatedRoot. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.7 | gsEBridgePortDesignatedCost | 0 | 0 | The path cost of the designated root of the segment connected to this port. See dot1dStpPortDesignatedCost. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.8 | gsEBridgePortDesignatedBridge | 0 | 0 | The bridge identifier of the bridge that is considered the designated bridge for this port's segment. See dot1dStpPortDesignate… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.9 | gsEBridgePortDesignatedPort | 0 | 0 | The port identifier of the port on the Designated Bridge for this port's segment. See dot1dStpPortDesignatedPort. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.10 | gsEBridgePortForwardTransitions | 0 | 0 | The number of times this port has transitioned from the learning state to the forwarding state. See dot1dStpPortForwardTransiti… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.12 | gsEBridgePortSetDefault | 0 | 0 | When set to setDefault(2), the gsEBridgePortPriority, gsEBridgePortEnable, and gsEBridgePortPathCost will be set to the factory d… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.13 | gsEBridgePortEnableChangeDetection | 0 | 0 | When this object is set to enable(1), a Topology Change Notification will be generated when this port goes to Blocking or Forwar… |