When this object is set to enable(1), a Topology Change Notification
will be generated when this port goes to Blocking or Forwarding (if
the port is a designated port). When set to disable(2), no
Topology Change Notification will be generated for this port.
Parsed from file GIGAswitchEthernet-MIB.mib
Module: GIGAswitchEthernet-MIB
Vendor: DEC
Module: GIGAswitchEthernet-MIB
[Automatically extracted from oidview.com]
gsEBridgePortEnableChangeDetection OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to enable(1), a Topology Change Notification will be generated when this port goes to Blocking or Forwarding (if the port is a designated port). When set to disable(2), no Topology Change Notification will be generated for this port." ::= { gsEBridgePortEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.1 | gsEBridgePortIndex | 0 | 0 | An index that uniquely identifies this bridge port. This index corresponds to the gsEResourceIndex for bridge port type resourc… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.2 | gsEBridgePortPriority | 0 | 0 | The value of the priority field in the port ID. See dot1dStpPortPriority. The default value is 128. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.3 | gsEBridgePortState | 0 | 0 | The port's current state as defined by the Spanning Tree Protocol. See dot1dStpPortState. The virtual port is considered broken … |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.4 | gsEBridgePortEnable | 0 | 0 | The enabled/disabled status of this port. See dot1dStpPortEnable. The default is enabled(2). |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.5 | gsEBridgePortPathCost | 0 | 0 | The contribution of this port to the path cost of the paths towards the spanning tree root. See dot1dStpPortPathCost. The defau… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.6 | gsEBridgePortDesignatedRoot | 0 | 0 | The bridge recorded as root for this port's segment. See dot1dStpPortDesignatedRoot. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.7 | gsEBridgePortDesignatedCost | 0 | 0 | The path cost of the designated root of the segment connected to this port. See dot1dStpPortDesignatedCost. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.8 | gsEBridgePortDesignatedBridge | 0 | 0 | The bridge identifier of the bridge that is considered the designated bridge for this port's segment. See dot1dStpPortDesignate… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.9 | gsEBridgePortDesignatedPort | 0 | 0 | The port identifier of the port on the Designated Bridge for this port's segment. See dot1dStpPortDesignatedPort. |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.10 | gsEBridgePortForwardTransitions | 0 | 0 | The number of times this port has transitioned from the learning state to the forwarding state. See dot1dStpPortForwardTransiti… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.11 | gsEBridgePortFastStart | 0 | 0 | This object is being replaced by the switch port object gsESwitchPortFastStart. When this bridge port object is set to enable(1)… |
| 1.3.6.1.4.1.36.2.18.39.5.1.3.1.1.12 | gsEBridgePortSetDefault | 0 | 0 | When set to setDefault(2), the gsEBridgePortPriority, gsEBridgePortEnable, and gsEBridgePortPathCost will be set to the factory d… |