Enabling auto VLAN creation for this switch port causes the
port to dynamically create a VLAN whenever an IEEE 802.1Q or
Multi-level tagged frame is received on the port with a tag value
which does not correspond to a known VLAN. All switch ports with
a trunking mode of IEEE 802.1Q or Multi-level are bound to this
created VLAN. The default is disable.
Parsed from file GIGAswitchEthernet-MIB.mib
Module: GIGAswitchEthernet-MIB
Vendor: DEC
Module: GIGAswitchEthernet-MIB
[Automatically extracted from oidview.com]
gsESwitchPortAutoVlanCreation OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enabling auto VLAN creation for this switch port causes the port to dynamically create a VLAN whenever an IEEE 802.1Q or Multi-level tagged frame is received on the port with a tag value which does not correspond to a known VLAN. All switch ports with a trunking mode of IEEE 802.1Q or Multi-level are bound to this created VLAN. The default is disable." ::= { gsESwitchPortEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.1 | gsESwitchPortIndex | 0 | 0 | A unique index that identifies this switch port. The value of this index corresponds to the value of the gsEResourceIndex for sw… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.2 | gsESwitchPortSTAPMode | 0 | 0 | Disabling spanning tree on a switch port prevents the switch port from participating in the spanning tree process. When disabled… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.3 | gsESwitchPortConvertToStatic | 0 | 0 | When this object is set to convertToStatic(2), all addresses learned on this port will be added to the non-volatile version of th… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.4 | gsESwitchPortLearningMode | 0 | 0 | Disable learning on a bridge port to prevent new addresses from being added to the address database. Used in combination with st… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.5 | gsESwitchPortHuntGroup | 0 | 0 | Hunt groups provide the capability to logically bind multiple switch ports into one switch port. This provides a way of balancin… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.6 | gsESwitchPortPhysicalPort | 0 | 0 | The physical port resource bound to this switch port. |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.7 | gsESwitchPortKnownMode | 0 | 0 | Enabling known mode for this switch port causes the port to safely discard frames flooded because they are unknown unicast frames… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.8 | gsESwitchPortMappingMethod | 0 | 0 | The frame mapping method of this switch port. When set to port-based(1) (the factory default), all non-tagged frames are classif… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.9 | gsESwitchPortTrunkingMode | 0 | 0 | The trunking mode of this port. All frames transmitted out this switch port are translated to the appropriate trunking format: Cl… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.10 | gsESwitchPortVlanBindingMethod | 0 | 0 | The VLAN binding method of a switch port specifies the way in which the port can be a member of the egress lists of VLANs other t… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.11 | gsESwitchPortIgnoreTag | 0 | 0 | Each switch port is capable of ignoring the VLAN Tag associated with a frame in a trunking format. When ignored, the tag is used… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.12 | gsESwitchPortVlanID | 0 | 0 | When this switch port is configured in port-based VLAN mode, all non-tagged frames received on this port are bound to this VLAN. … |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.15 | gsESwitchPortMirrorMode | 0 | 0 | When set to enable(1), this object indicates that the port is defined as a mirror port through the gsEPortMirroringTable. A mirr… |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.16 | gsESwitchPortIfIndex | 0 | 0 | Each switch port is associated with an interface. This object provides a mechanism to map switch ports to bridge ports. |
| 1.3.6.1.4.1.36.2.18.39.5.2.1.1.17 | gsESwitchPortFastStart | 0 | 0 | When this object is set to enable(1), bridge ports on this switch port transitions right from blocking to forwarding, skipping t… |