sensorProbeTempSirenOnPort OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports"
View at oid-info.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.3854.1.2.2.1.16.1.1 | hhmsSensorArrayTempDescription | 0 | 0 | A Description of this sensor |
1.3.6.1.4.1.3854.1.2.2.1.16.1.2 | hhmsSensorArrayTempLocation | 0 | 0 | The physical location of this sensor |
1.3.6.1.4.1.3854.1.2.2.1.16.1.3 | hhmsSensorArrayTempDegree | 1 | 1 | The degrees in this sensor |
1.3.6.1.4.1.3854.1.2.2.1.16.1.4 | hhmsSensorArrayTempStatus | 1 | 1 | The current status of this Sensor |
1.3.6.1.4.1.3854.1.2.2.1.16.1.5 | hhmsSensorArrayTempOnline | 0 | 0 | If this Sensor is currently online |
1.3.6.1.4.1.3854.1.2.2.1.16.1.6 | hhmsSensorArrayTempGoOnline | 0 | 0 | To put online enter a 1, to take offline enter a 2 |
1.3.6.1.4.1.3854.1.2.2.1.16.1.7 | hhmsSensorArrayTempHighWarning | 0 | 0 | How hot this sensor gets before it sends a warning |
1.3.6.1.4.1.3854.1.2.2.1.16.1.8 | hhmsSensorArrayTempHighCritical | 0 | 0 | How hot this sensor gets before it sends a critical event |
1.3.6.1.4.1.3854.1.2.2.1.16.1.9 | hhmsSensorArrayTempLowWarning | 0 | 0 | How cold this sensor gets before it sends a warning |
1.3.6.1.4.1.3854.1.2.2.1.16.1.10 | hhmsSensorArrayTempLowCritical | 0 | 0 | How cold this sensor gets before it sends a critical event |
1.3.6.1.4.1.3854.1.2.2.1.16.1.11 | hhmsSensorArrayTempRearm | 0 | 0 | The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down hhmsTempRea… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.12 | hhmsSensorArrayTempDegreeType | 0 | 0 | The degrees are in fahrenheit(0) or in celsius(1) |
1.3.6.1.4.1.3854.1.2.2.1.16.1.13 | hhmsSensorArrayTempSensorType | 0 | 0 | The type of temperture sensor |
1.3.6.1.4.1.3854.1.2.2.1.16.1.14 | hhmsSensorArrayTempTestStatus | 0 | 0 | Set the status for test purposes |
1.3.6.1.4.1.3854.1.2.2.1.16.1.15 | hhmsSensorArrayTempTestDegree | 0 | 0 | Enter the degrees in this sensor for test purposes |
1.3.6.1.4.1.3854.1.2.2.1.16.1.16 | hhmsSensorArrayTempIndex | 0 | 0 | The index into the temperature sensor table |
1.3.6.1.4.1.3854.1.2.2.1.16.1.17 | sensorProbeTempEmailTrapSchedule | 0 | 0 | sensorProbeTempEmailTrapSchedule OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "SP Only: Emai… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.18 | sensorProbeTempEmailTrapInterval | 0 | 0 | sensorProbeTempEmailTrapInterval OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "Minimum tim… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.19 | sensorProbeTempSendNormalTrap | 0 | 0 | sensorProbeTempSendNormalTrap OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTI… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.20 | sensorProbeTempDelayError | 0 | 0 | sensorProbeTempDelayError OBJECT-TYPE SYNTAX INTEGER (0..65534) ACCESS read-write STATUS mandatory DESCRIPTION "Time in seconds… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.21 | sensorProbeTempDelayNormal | 0 | 0 | sensorProbeTempDelayNormal OBJECT-TYPE SYNTAX INTEGER (0..65534) ACCESS read-write STATUS mandatory DESCRIPTION "Time in second… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.22 | sensorProbeTempIndex | 0 | 0 | sensorProbeTempIndex OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "The index into the temper… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.23 | sensorProbeTempRelayCycleTime | 0 | 0 | sensorProbeTempRelayCycleTime OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Relay toggle … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.24 | sensorProbeTempRelayOnPort | 0 | 0 | sensorProbeTempRelayOnPort OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "The sensor port … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.25 | sensorProbeTempRelayActiveStatus | 0 | 0 | sensorProbeTempRelayActiveStatus OBJECT-TYPE SYNTAX INTEGER { highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), a… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.26 | sensorProbeTempRelayAction | 0 | 0 | sensorProbeTempRelayAction OBJECT-TYPE SYNTAX INTEGER { cycle(2), turn-on(3), turn-off(4) } ACCESS read-write STATUS mandatory … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.27 | sensorProbeTempEmailInterval | 0 | 0 | sensorProbeTempEmailInterval OBJECT-TYPE SYNTAX INTEGER (0..60) ACCESS read-write STATUS mandatory DESCRIPTION "CP8 Only: Minim… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.28 | sensorProbeTempIndexCount | 0 | 0 | sensorProbeTempIndexCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of Temperature senso… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.29 | sensorProbeTempOffset | 0 | 0 | sensorProbeTempOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Temperature Offset reading" |
1.3.6.1.4.1.3854.1.2.2.1.16.1.30 | sensorProbeTempSirenCycleTime | 0 | 0 | sensorProbeTempSirenCycleTime OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Siren toggle … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.32 | sensorProbeTempSirenActiveStatus | 0 | 0 | sensorProbeTempSirenActiveStatus OBJECT-TYPE SYNTAX INTEGER { highWarning(3), highCritical(4), lowWarning(5), lowCritical(6), a… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.33 | sensorProbeTempSirenAction | 0 | 0 | sensorProbeTempSirenAction OBJECT-TYPE SYNTAX INTEGER { cycle(2), turn-on(3), turn-off(4) } ACCESS read-write STATUS mandatory … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.34 | sensorProbeTempAcknowledgement | 0 | 0 | sensorProbeTempAcknowledgement OBJECT-TYPE SYNTAX INTEGER { ack(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Acknowledg… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.35 | sensorProbeTempSirenDelayAlarm | 0 | 0 | sensorProbeTempSirenDelayAlarm OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "Siren delay … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.36 | sensorProbeTempURL | 0 | 0 | sensorProbeTempURL OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Sensor URL link." |
1.3.6.1.4.1.3854.1.2.2.1.16.1.37 | sensorProbeTempOpenURL | 0 | 0 | sensorProbeTempOpenURL OBJECT-TYPE SYNTAX INTEGER { cur-window(0), new-window(2) } ACCESS read-write STATUS mandatory DESCRIPTI… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.38 | sensorProbeTempDatacollectType | 0 | 0 | sensorProbeTempDatacollectType OBJECT-TYPE SYNTAX INTEGER { average(1), highest(2), lowest(3) } ACCESS read-write STATUS mandat… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.39 | sensorProbeTempContTimeHighCritical | 0 | 0 | sensorProbeTempContTimeHighCritical OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Conti… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.40 | sensorProbeTempContTimeHighWarning | 0 | 0 | sensorProbeTempContTimeHighWarning OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Contin… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.41 | sensorProbeTempContTimeNormal | 0 | 0 | sensorProbeTempContTimeNormal OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Continuous … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.42 | sensorProbeTempContTimeLowWarning | 0 | 0 | sensorProbeTempContTimeLowWarning OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Continu… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.43 | sensorProbeTempContTimeLowCritical | 0 | 0 | sensorProbeTempContTimeLowCritical OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Contin… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.44 | sensorProbeTempContTimeSensorError | 0 | 0 | sensorProbeTempContTimeSensorError OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Contin… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.45 | sensorProbeTempCalendar | 0 | 0 | sensorProbeTempCalendar OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "En… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.46 | sensorProbeThermostatIndex | 0 | 0 | sensorProbeThermostatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each se… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.47 | sensorProbeThermostatDescription | 0 | 0 | sensorProbeThermostatDescription OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "A Description… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.48 | sensorProbeThermostatValue | 0 | 0 | sensorProbeThermostatValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value in this sensor" |
1.3.6.1.4.1.3854.1.2.2.1.16.1.49 | sensorProbeThermostatOnline | 0 | 0 | sensorProbeThermostatOnline OBJECT-TYPE SYNTAX INTEGER { online(1), offline(2) } ACCESS read-only STATUS mandatory DESCRIPTION … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.50 | sensorProbeThermostatGoOnline | 0 | 0 | sensorProbeThermostatGoOnline OBJECT-TYPE SYNTAX INTEGER { goOnline(1), goOffline(2) } ACCESS read-write STATUS mandatory DESCR… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.51 | sensorProbeThermostatMode | 0 | 0 | sensorProbeThermostatMode OBJECT-TYPE SYNTAX INTEGER { normal(0), time-bases(1) } ACCESS read-write STATUS mandatory DESCRIPTIO… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.52 | sensorProbeThermostatRelayControlPort | 0 | 0 | sensorProbeThermostatRelayControlPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To select a re… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.53 | sensorProbeThermostatNormalAction1 | 0 | 0 | sensorProbeThermostatNormalAction1 OBJECT-TYPE SYNTAX INTEGER { turn-on(0), turn-off(1), no-change(2) } ACCESS read-write STATU… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.54 | sensorProbeThermostatHighLimit1 | 0 | 0 | sensorProbeThermostatHighLimit1 OBJECT-TYPE SYNTAX INTEGER (-40..167) ACCESS read-write STATUS mandatory DESCRIPTION "Profile1:… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.55 | sensorProbeThermostatHighLimitAction1 | 0 | 0 | sensorProbeThermostatHighLimitAction1 OBJECT-TYPE SYNTAX INTEGER { turn-on(0), turn-off(1), no-change(2) } ACCESS read-write ST… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.56 | sensorProbeThermostatLowLimit1 | 0 | 0 | sensorProbeThermostatLowLimit1 OBJECT-TYPE SYNTAX INTEGER (-40..167) ACCESS read-write STATUS mandatory DESCRIPTION "Profile1: … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.57 | sensorProbeThermostatLowLimitAction1 | 0 | 0 | sensorProbeThermostatLowLimitAction1 OBJECT-TYPE SYNTAX INTEGER { turn-on(0), turn-off(1), no-change(2) } ACCESS read-write STA… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.58 | sensorProbeThermostatNormalAction2 | 0 | 0 | sensorProbeThermostatNormalAction2 OBJECT-TYPE SYNTAX INTEGER { turn-on(0), turn-off(1), no-change(2) } ACCESS read-write STATU… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.59 | sensorProbeThermostatHighLimit2 | 0 | 0 | sensorProbeThermostatHighLimit2 OBJECT-TYPE SYNTAX INTEGER (-40..167) ACCESS read-write STATUS mandatory DESCRIPTION "Profile2:… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.60 | sensorProbeThermostatHighLimitAction2 | 0 | 0 | sensorProbeThermostatHighLimitAction2 OBJECT-TYPE SYNTAX INTEGER { turn-on(0), turn-off(1), no-change(2) } ACCESS read-write ST… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.61 | sensorProbeThermostatLowLimit2 | 0 | 0 | sensorProbeThermostatLowLimit2 OBJECT-TYPE SYNTAX INTEGER (-40..167) ACCESS read-write STATUS mandatory DESCRIPTION "Profile2: … |
1.3.6.1.4.1.3854.1.2.2.1.16.1.62 | sensorProbeThermostatLowLimitAction2 | 0 | 0 | sensorProbeThermostatLowLimitAction2 OBJECT-TYPE SYNTAX INTEGER { turn-on(0), turn-off(1), no-change(2) } ACCESS read-write STA… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.63 | sensorProbeThermostatEnableTime | 0 | 0 | sensorProbeThermostatEnableTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Time to enable… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.64 | sensorProbeTempSendNormalMail | 0 | 0 | sensorProbeTempSendNormalMail OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTI… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.65 | sensorProbeTempSendTrap | 0 | 0 | sensorProbeTempSendTrap OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "En… |
1.3.6.1.4.1.3854.1.2.2.1.16.1.66 | sensorProbeTempSendMail | 0 | 0 | sensorProbeTempSendMail OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } ACCESS read-write STATUS mandatory DESCRIPTION "En… |