The quick-setup options that can be selected
to speedily set the function on one or more radios
on the AP.
Note that quick-setup option abgnWlanAndSensor(1)
is available only in the tri-radio SKU.
The two-radio SKU permits only options 2 through 8.
The single-radio SKU permits only options 5 through 8.
Note also that the setting of some of the options may
fail due to the power management configuration being
inconsistent with the minimum power requirements for
those options.
Parsed from file SYMBOL-AP-MIB-01h184.1.1.0-018R.mib.txt
Company: motorola
Module: SYMBOL-AP-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
apRadioQuickSetup OBJECT-TYPE SYNTAX INTEGER { abgnWlanAndSensor(1), bgnWlanAndSensor(2), anWlanAndSensor(3), abgnWlanOnlyNoSensor(4), sensorOnlySpectrumAnalysisModeNoWlan(5), bgnWlanNoSensor(6), anWlanNoSensor(7), radiosOff(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The quick-setup options that can be selected to speedily set the function on one or more radios on the AP. Note that quick-setup option abgnWlanAndSensor(1) is available only in the tri-radio SKU. The two-radio SKU permits only options 2 through 8. The single-radio SKU permits only options 5 through 8. Note also that the setting of some of the options may fail due to the power management configuration being inconsistent with the minimum power requirements for those options." ::= { apRadio 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.388.11.3.4.1.12.0 | apRadioQuickSetup | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.388.11.3.4.1.1 | apRadioSettingsTable | 1 | 46 | Use apRadioSettingsTable to view and set the properties of the radios. |
| 1.3.6.1.4.1.388.11.3.4.1.2 | apRadioCfgTable | 1 | 18 | Use apRadioCfgTable to view and set the radio properties of the Access Points. The process can be broken down into the followin… |
| 1.3.6.1.4.1.388.11.3.4.1.3 | apRadioWlanBssTable | 1 | 2 | Table of BSSIDs mapped to WLANs. |
| 1.3.6.1.4.1.388.11.3.4.1.4 | apRadioBssTable | 1 | 4 | Use apRadioBssTable to view and set the properties of the Bss's. |
| 1.3.6.1.4.1.388.11.3.4.1.5 | apRadioE2BMapStatusTable | 1 | 4 | The table describes the ESS to BSS mapping status. |
| 1.3.6.1.4.1.388.11.3.4.1.6 | apRadioMesh | 3 | 21 | None |
| 1.3.6.1.4.1.388.11.3.4.1.7 | apRadioWlanBandwidthTable | 1 | 2 | apRadioWlanBandwidthtable |
| 1.3.6.1.4.1.388.11.3.4.1.8 | apRadioNSettingsTable | 1 | 4 | This table adds 802.11n specific settings for an 'n' radio in addition to the common settings under apRadioSettingsTable. |
| 1.3.6.1.4.1.388.11.3.4.1.9 | apRadioNCfgTable | 1 | 13 | Description. |
| 1.3.6.1.4.1.388.11.3.4.1.10 | apRadioNMcsRateTable | 1 | 8 | The AP with the 802.11n radio supports modulation coding schemes (MCS) 0-15. This maps to the table entries 1-16. To the user, th… |
| 1.3.6.1.4.1.388.11.3.4.1.13 | apRadioSensorOnlyModeEnabled | 1 | 1 | Enable/disable state for the Sensor Only mode. |