Node Secondary Presentation Timer.
After a call has been cleared by the Host DTE the user
has the option to use the presentation service to
establish another call, failure to do so within this time
period will result in the initial call being cleared.
Parsed from file SATELCOM-MIB.mib.txt
Company: None
Module: SATELCOM-MIB
Node Secondary Presentation Timer.
After a call has been cleared by the Host DTE the user
has the option to use the presentation service to
establish another call, failure to do so within this time
period will result in the initial call being cleared.
Parsed from file SATELCOM-MIB.mib
Module: SATELCOM-MIB
Vendor: MegaPAC
Module: SATELCOM-MIB
[Automatically extracted from oidview.com]
baseSecondaryPresentationTimer OBJECT-TYPE SYNTAX INTEGER (0..300) ACCESS read-write STATUS mandatory DESCRIPTION "Node Secondary Presentation Timer. After a call has been cleared by the Host DTE the user has the option to use the presentation service to establish another call, failure to do so within this time period will result in the initial call being cleared." ::= { base 25 }
baseSecondaryPresentationTimer OBJECT-TYPE SYNTAX INTEGER (0..300) ACCESS read-write STATUS mandatory DESCRIPTION "Node Secondary Presentation Timer. After a call has been cleared by the Host DTE the user has the option to use the presentation service to establish another call, failure to do so within this time period will result in the initial call being cleared." ::= { base 25 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.397.2.25.0 | baseSecondaryPresentationTimer | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.397.2.1 | baseVersion | 1 | 1 | Software Version. The software version currently running. Defined as YMMR (i.e. Year, Month, Revision |
| 1.3.6.1.4.1.397.2.2 | baseRestartTime | 1 | 1 | BASE Restart Time. The time and data of the last system restart (i.e. power-on or last BOOT) |
| 1.3.6.1.4.1.397.2.3 | baseMaxPacketSize | 1 | 1 | Node Maximum Packet Size. The maximum single buffer size available on the MegaPAC. |
| 1.3.6.1.4.1.397.2.4 | baseBuffPoolMax | 1 | 1 | Node Buffer Pool Maximum. The maximum number of buffers available temporary storage of transitting data. |
| 1.3.6.1.4.1.397.2.5 | baseBuffPoolNow | 1 | 1 | Node Current Buffer Pool. The current number of free buffers available temporary storage of transitting data. |
| 1.3.6.1.4.1.397.2.6 | baseBufferPoolLowest | 1 | 1 | Node Buffer Pool Lowest. The lowest value the buffer pool has ever reached. |
| 1.3.6.1.4.1.397.2.7 | baseBufferPoolEmpty | 1 | 1 | Node Buffer Pool Empty. The number of times that the free buffer pool has fallen below the minimum buffer threshold 'baseBuffThre… |
| 1.3.6.1.4.1.397.2.8 | baseStatBufferThreshold | 1 | 1 | Node Buffer Threshold. When the number of buffers in the free buffer pool reaches this threshold, flow control will occur. |
| 1.3.6.1.4.1.397.2.9 | baseMemorySize | 1 | 1 | Node Memory Size. The size of the system memory installed in the MegaPAC. |
| 1.3.6.1.4.1.397.2.10 | baseDataFramesIn | 1 | 1 | Node Frames In. The total number of frames received by the MegaPAC. |
| 1.3.6.1.4.1.397.2.11 | baseDataFramesOut | 1 | 1 | Node Frames Out. The total number of frames transmitted by the MegaPAC. |
| 1.3.6.1.4.1.397.2.12 | baseDataFrameRateIn | 1 | 1 | Node Frame Rate In. The rate measured in frames per second that the MegaPAC is currently receiving frames. |
| 1.3.6.1.4.1.397.2.13 | baseDataFrameRateOut | 1 | 1 | Node Frames Rate Out. The rate measured in frames per second that the MegaPAC is currently transmitting frames. |
| 1.3.6.1.4.1.397.2.14 | baseTotalCallSetUps | 1 | 1 | Node Total Call Set ups. The total number of calls successfully established by the MegaPAC. |
| 1.3.6.1.4.1.397.2.15 | baseCurrentCalls | 1 | 1 | Current calls. The number of calls currently active on the MegaPAC. |
| 1.3.6.1.4.1.397.2.16 | baseRetransmissions | 1 | 1 | Node Retransmissions. The total number of frames which have been retransmitted by the MegaPAC. |
| 1.3.6.1.4.1.397.2.17 | baseRejects | 1 | 1 | Node Rejects. The total number of frames that have been rejected by the MegaPAC. |
| 1.3.6.1.4.1.397.2.18 | baseTotalTransportCalls | 1 | 1 | Node Total Transport calls. The total number of transport calls established by the MegaPAC. |
| 1.3.6.1.4.1.397.2.19 | baseCurrentTransportCalls | 1 | 1 | Current Transport Calls. The number of transport calls currently active on the MegaPAC. |
| 1.3.6.1.4.1.397.2.20 | baseRunStatus | 1 | 1 | Node Run Status. This parameter indicates whether the operating system has been 'Booted' from RAM (TELELOAD) or EPROM (default). |
| 1.3.6.1.4.1.397.2.21 | baseReports | 1 | 1 | Node Reporting channel. The name of the logical resource (channel) that the system reports will be directed to. |
| 1.3.6.1.4.1.397.2.22 | baseSessionStatistics | 1 | 1 | Node Session Statistics reporting channel. The name of the logical resource (channel) that the system session statistics will be … |
| 1.3.6.1.4.1.397.2.23 | baseBufferThreshold | 1 | 1 | Node Buffer Threshold. The threshold before flow control is invoked |
| 1.3.6.1.4.1.397.2.24 | baseInitialPresentationTimer | 1 | 1 | Node Initial Presentation Timer. The maximum time allowed between initial connection to the presentation service and the user ent… |
| 1.3.6.1.4.1.397.2.26 | baseInactivityDetectTimer | 1 | 1 | Node Inactivity Timer. This timer will cause calls to be cleared if the IDLE option has been configured on the channel. |
| 1.3.6.1.4.1.397.2.27 | baseSegmentAccounting | 1 | 1 | Node Segment Accounting. This parameter causes the frames in/out parameters to be displayed in terms of 64 byte SEGMENTS rather t… |
| 1.3.6.1.4.1.397.2.28 | baseTerminalEmulationBuffers | 1 | 1 | Terminal Emulation Buffers. The number of system buffers allocated for Terminal Emulation purposes. |
| 1.3.6.1.4.1.397.2.29 | baseTransportBuffers | 1 | 1 | Transport Buffers. The number of transport buffers allocated for TP 0,2,3,4 sessions. |
| 1.3.6.1.4.1.397.2.30 | baseCountrySettings | 1 | 1 | Country Setting. Invokes the ASCII representation of the Japanese character set. |
| 1.3.6.1.4.1.397.2.31 | baseTeleloadEnabled | 1 | 1 | Teleload enable. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
| 1.3.6.1.4.1.397.2.32 | baseDefaultToPromCompatible | 1 | 1 | Cold Boot From PROM. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
| 1.3.6.1.4.1.397.2.33 | baseCommand | 1 | 1 | Allows SNMP manager to execute commands. |
| 1.3.6.1.4.1.397.2.34 | baseCommandControllerIndex | 1 | 1 | Sets controller index for baseCommands where relevant. |
| 1.3.6.1.4.1.397.2.35 | baseCommandChannelndex | 1 | 1 | Sets channel index for baseCommands where relevant. |
| 1.3.6.1.4.1.397.2.36 | baseConnectedToProtocol | 1 | 1 | Indicates the VCP state. NULL is VCP free; a returned value indicates BUSY and maps the access protocol. |
| 1.3.6.1.4.1.397.2.37 | baseBillingThreshold | 1 | 1 | Sets threshold for billing alarms - entry written to ELOG file, and trap sent. |
| 1.3.6.1.4.1.397.2.38 | baseBillUnread | 1 | 1 | Number of BILLING records outstanding - to be read by SNMP manager. |
| 1.3.6.1.4.1.397.2.39 | baseCurrentBill | 1 | 1 | Record number of current available BILLING record. |
| 1.3.6.1.4.1.397.2.40 | baseBillRecordBuffer | 1 | 1 | The current BILLING record data. |
| 1.3.6.1.4.1.397.2.41 | baseCurrentConfig | 1 | 1 | A decimal number from 0000 to 9999 representing the current configuration. |
| 1.3.6.1.4.1.397.2.44 | baseCommandBuffer | 1 | 1 | The VCP single line command string buffer. |
| 1.3.6.1.4.1.397.2.45 | baseCommandLength | 1 | 1 | The length in Hex of the single line command string. |
| 1.3.6.1.4.1.397.2.46 | baseEMPresent | 1 | 1 | Indicator of whether Environmental Monitor is present. |
| 1.3.6.1.4.1.397.2.47 | baseEMTempTens | 1 | 1 | Tens part of Environmental Monitor temperature. |
| 1.3.6.1.4.1.397.2.48 | baseEMTempUnits | 1 | 1 | Unit part of Environmental Monitor temperature. |
| 1.3.6.1.4.1.397.2.49 | baseEMFan1 | 1 | 1 | Environmental Monitor Fan 1 state. |
| 1.3.6.1.4.1.397.2.50 | baseEMFan2 | 1 | 1 | Environmental Monitor Fan 2 state. |
| 1.3.6.1.4.1.397.2.51 | baseEMFan3 | 1 | 1 | Environmental Monitor Fan 3 state. |
| 1.3.6.1.4.1.397.2.52 | baseEMVoltage | 1 | 1 | Environmental Monitor voltage. |
| 1.3.6.1.4.1.397.2.53 | baseEMPsu1 | 1 | 1 | Environmental Monitor PSU 1 state. |
| 1.3.6.1.4.1.397.2.54 | baseEMPsu2 | 1 | 1 | Environmental Monitor PSU 2 state. |
| 1.3.6.1.4.1.397.2.55 | baseCPUUtil | 1 | 1 | CPU utilisation in the range 0 to 100. |