Echo Mask.
This parameter controls the characters which should not
be echoed. The valid settings are:
0 All characters should be echoed to the terminal.
1 do not echo carriage return.
2 do not echo linefeed.
4 do not echo VT, HT and FF characters.
8 do not echo BEL and BS character.
16 do not echo ESC and ENQ.
32 do not echo ACK, NAK, STX, SOH, EOT, ETB or ETX.
64 do not echo editing characters as defined by
parameters 16, 17 and 18.
128 do not echo other control characters and DEL.
Parsed from file SATELCOM-MIB.mib.txt
Company: None
Module: SATELCOM-MIB
Echo Mask.
This parameter controls the characters which should not
be echoed. The valid settings are:
0 All characters should be echoed to the terminal.
1 do not echo carriage return.
2 do not echo linefeed.
4 do not echo VT, HT and FF characters.
8 do not echo BEL and BS character.
16 do not echo ESC and ENQ.
32 do not echo ACK, NAK, STX, SOH, EOT, ETB or ETX.
64 do not echo editing characters as defined by
parameters 16, 17 and 18.
128 do not echo other control characters and DEL.
Parsed from file SATELCOM-MIB.mib
Module: SATELCOM-MIB
Vendor: MegaPAC
Module: SATELCOM-MIB
[Automatically extracted from oidview.com]
chanParamEchoMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Echo Mask. This parameter controls the characters which should not be echoed. The valid settings are: 0 All characters should be echoed to the terminal. 1 do not echo carriage return. 2 do not echo linefeed. 4 do not echo VT, HT and FF characters. 8 do not echo BEL and BS character. 16 do not echo ESC and ENQ. 32 do not echo ACK, NAK, STX, SOH, EOT, ETB or ETX. 64 do not echo editing characters as defined by parameters 16, 17 and 18. 128 do not echo other control characters and DEL." REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::= { chanParamEntry 32 }
chanParamEchoMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Echo Mask. This parameter controls the characters which should not be echoed. The valid settings are: 0 All characters should be echoed to the terminal. 1 do not echo carriage return. 2 do not echo linefeed. 4 do not echo VT, HT and FF characters. 8 do not echo BEL and BS character. 16 do not echo ESC and ENQ. 32 do not echo ACK, NAK, STX, SOH, EOT, ETB or ETX. 64 do not echo editing characters as defined by parameters 16, 17 and 18. 128 do not echo other control characters and DEL." REFERENCE "CONS IP TIP TERM X25 XFRM XLAN" ::= { chanParamEntry 32 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.397.4.3.1.1 | chanParamIndex | 0 | 0 | Index. The position of this channel in the controller channel Table. |
| 1.3.6.1.4.1.397.4.3.1.2 | chanParamName | 0 | 0 | Name. A user defined name for routing calls to this channel. |
| 1.3.6.1.4.1.397.4.3.1.3 | chanParamDRCMask | 0 | 0 | DRC Mask. A four character string used to force expicit routing to the named resource. |
| 1.3.6.1.4.1.397.4.3.1.4 | chanParamTerminalType | 0 | 0 | Terminal Type. If the channel is to perform terminal emulation, then the setting defined will be specific to the users terminal e… |
| 1.3.6.1.4.1.397.4.3.1.5 | chanParamCircuitType | 0 | 0 | Circuit Type. The type of circuit used on this channel |
| 1.3.6.1.4.1.397.4.3.1.6 | chanParamOptions | 0 | 0 | Options. A range of channel options, these options may be specified individually or added together. |
| 1.3.6.1.4.1.397.4.3.1.7 | chanParamBuffers | 0 | 0 | Buffers. The number of system buffers allocated to this channel for incoming calls. |
| 1.3.6.1.4.1.397.4.3.1.8 | chanParamDiscMode | 0 | 0 | DISC Mode. The number of the character in decimal which forces disconnection of the call. |
| 1.3.6.1.4.1.397.4.3.1.9 | chanParamMenuNumber | 0 | 0 | Menu Number. Specifies which menu will be displayed to the user by the presentation service |
| 1.3.6.1.4.1.397.4.3.1.10 | chanParamHelpNumber | 0 | 0 | Help Number. Specifies which help screen will be displayed to the user by the presentation service. |
| 1.3.6.1.4.1.397.4.3.1.11 | chanParamNewsNumber | 0 | 0 | News Number. The number of the menu which will be displayed if an outgoing channel is unavailable. |
| 1.3.6.1.4.1.397.4.3.1.12 | chanParamCallPriority | 0 | 0 | Call Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call Pri… |
| 1.3.6.1.4.1.397.4.3.1.13 | chanParamResourcePriority | 0 | 0 | Resource Priority. Call and Resource priorities are used primarily for providing alternate routing. For a call to succeed the Call… |
| 1.3.6.1.4.1.397.4.3.1.14 | chanParamPadEnable | 0 | 0 | Pad Enable. The effect of the PAD Enable parameters are as follows: enable PAD services enabled. The logical channel will res… |
| 1.3.6.1.4.1.397.4.3.1.15 | chanParamPadRecall | 0 | 0 | Pad Recall (1). This parameter allows the user to escape from the data transfer state to the PAD command state. The permitted valu… |
| 1.3.6.1.4.1.397.4.3.1.16 | chanParamEcho | 0 | 0 | Echo. Determines whether 'echo' is enabled or disabled. If set to controlled, the echo facility is controlled by the operator. |
| 1.3.6.1.4.1.397.4.3.1.17 | chanParamDataForwarding | 0 | 0 | Data Forwarding. This parameter controls which character or characters cause the accumulated data to be forwarded. The possible va… |
| 1.3.6.1.4.1.397.4.3.1.18 | chanParamDelay | 0 | 0 | Delay. Specifies the idle time in tenths of a second, allowable between successive characters before the accumulated data is forwa… |
| 1.3.6.1.4.1.397.4.3.1.19 | chanParamDRI | 0 | 0 | DRI. Flow control of terminal by the MegaPAC. Valid settings are: enabled MegaPAC flow controls terminal using XON/XOFF. c… |
| 1.3.6.1.4.1.397.4.3.1.20 | chanParamPadSignals | 0 | 0 | Pad Signals. Enable X.28 prompts and/or messages to be displayed on the users terminal. |
| 1.3.6.1.4.1.397.4.3.1.21 | chanParamBreak | 0 | 0 | Break. The Action the MegaPAC will take on receipt of a Break Signal. The valid values are: 0 When the MegaPAC receives a Br… |
| 1.3.6.1.4.1.397.4.3.1.22 | chanParamPadding | 0 | 0 | Padding. The number of NULL characters inserted after a carriage return. |
| 1.3.6.1.4.1.397.4.3.1.23 | chanParamFold | 0 | 0 | Fold. The number of characters output before line folding occurs. Setting to 0 disables line folding. |
| 1.3.6.1.4.1.397.4.3.1.24 | chanParamDRO | 0 | 0 | Data Restraint Out. |
| 1.3.6.1.4.1.397.4.3.1.25 | chanParamLFI | 0 | 0 | LFI. This parameter controls linefeed insertion after a carriage return. The valid settings are: 0 Line feed insertion disab… |
| 1.3.6.1.4.1.397.4.3.1.26 | chanParamLFPad | 0 | 0 | LFPad. The number of NULL padding characters sent to a device following a linefeed character. |
| 1.3.6.1.4.1.397.4.3.1.27 | chanParamEdit | 0 | 0 | Edit. Controls editing of text in data transfer state. |
| 1.3.6.1.4.1.397.4.3.1.28 | chanParamCharDel | 0 | 0 | Char Delete. The keystroke used for deleting a character. |
| 1.3.6.1.4.1.397.4.3.1.29 | chanParamBufferDel | 0 | 0 | Buffer Delete. The keystroke used for deleting the buffer. |
| 1.3.6.1.4.1.397.4.3.1.30 | chanParamDisp | 0 | 0 | Disp. The keystroke used to redisplay the data in the buffer. |
| 1.3.6.1.4.1.397.4.3.1.31 | chanParamEditServiceSignals | 0 | 0 | Edit Service Signals. This parameter enables the user to edit the PAD service signals (echoing). The valid settings are: 0 N… |
| 1.3.6.1.4.1.397.4.3.1.33 | chanParamParityTreatment | 0 | 0 | Parity Treatment. Determines the parity generation and checking performed valid settings are: 0 No parity generation or chec… |
| 1.3.6.1.4.1.397.4.3.1.34 | chanParamPageWait | 0 | 0 | Page Wait. Specifies the number of lines to be transmitted, after which the MegaPAC will wait until instructed by the user to cont… |
| 1.3.6.1.4.1.397.4.3.1.35 | chanParamForce | 0 | 0 | Force. The ASCII character which will force data forwarding, 0 disables forced data forwarding. |
| 1.3.6.1.4.1.397.4.3.1.36 | chanParamBreakChar | 0 | 0 | Break Character. The ASCII character in decimal which is used to simulate a BREAK signal. |
| 1.3.6.1.4.1.397.4.3.1.37 | chanParamNetworkParity | 0 | 0 | Network Parity. With the Terminal type set to ASYN+X28, the parity can be forced onto the network side by selecting the approriat… |
| 1.3.6.1.4.1.397.4.3.1.38 | chanParamEscapeDelay | 0 | 0 | Escape Delay. Specifies the time in tenths of a second, that after receiving an ESC character, all characters are buffered before … |
| 1.3.6.1.4.1.397.4.3.1.39 | chanParamStationAddress | 0 | 0 | Station Address. Physical Unit Address of the Cluster Controller. |
| 1.3.6.1.4.1.397.4.3.1.40 | chanParamProvideXID | 0 | 0 | Provide XID. |
| 1.3.6.1.4.1.397.4.3.1.41 | chanParamMode | 0 | 0 | Mode. This parameter provides a number of additional connection facilities for channels on virtual controllers. |
| 1.3.6.1.4.1.397.4.3.1.42 | chanParamPortMatch | 0 | 0 | Port Match. This parameter optionally allows the Source and Destination ports to be used in conjunction with the IP address for ro… |
| 1.3.6.1.4.1.397.4.3.1.43 | chanParamReverseTelnetPort | 0 | 0 | Reverse Telnet Port. The port number which will respond to TELNET open requests. The default value for TELNET ports is '23'. |
| 1.3.6.1.4.1.397.4.3.1.44 | chanParamBroadcastFilterTimer | 0 | 0 | Broadcast Filter Timer. |
| 1.3.6.1.4.1.397.4.3.1.45 | chanParamInhibitLearning | 0 | 0 | Inhibit Learning. This parameter determines whether the 'bridge' will work in Directed or Learning mode. If InhibitLearning is set… |
| 1.3.6.1.4.1.397.4.3.1.46 | chanParamRetainSession | 0 | 0 | Retain Session. This parameter determines if and how a session will be cleared down when the call is cleared. The parameter is onl… |
| 1.3.6.1.4.1.397.4.3.1.47 | chanParamPrinterType | 0 | 0 | Printer Type. If set to IBM the logical channel will act as an appication system printer, otherwise it operates in screen emulatio… |
| 1.3.6.1.4.1.397.4.3.1.48 | chanParamScreenPrinter | 0 | 0 | Screen Printer. If set to YES, screen printer requests are to be processed and sent to this LU address (in this mode, the termina… |
| 1.3.6.1.4.1.397.4.3.1.49 | chanParamLocalPrinter | 0 | 0 | Local Printer. This parameter specifies the channel to which screen printing should be directed. It takes precedence over the val… |
| 1.3.6.1.4.1.397.4.3.1.50 | chanParamInterlockBind | 0 | 0 | Interlock Bind. This parameter is only applicable to channels (2) to (n). When set to YES, an UNBIND request will be sent to the … |
| 1.3.6.1.4.1.397.4.3.1.51 | chanParamRedirectPrintTo | 0 | 0 | Redirect Printer To. This parameter is only applicable to channels (2) to (n). If set to (0), then no redirection takes place. Ot… |
| 1.3.6.1.4.1.397.4.3.1.52 | chanParamLUBase | 0 | 0 | First LU defined by up-stream host. |
| 1.3.6.1.4.1.397.4.3.1.53 | chanParamLUOffset | 0 | 0 | LU Offset. |
| 1.3.6.1.4.1.397.4.3.1.54 | chanParamLUTotal | 0 | 0 | Total number of LUs to be allocated to down- stream PU's. |
| 1.3.6.1.4.1.397.4.3.1.55 | chanParamDlciBase | 0 | 0 | The channel DLCI address. |
| 1.3.6.1.4.1.397.4.3.1.56 | chanParamDlciAdjacentBase | 0 | 0 | The DLCI number on the cross connected port in the MegaPAC used when groups of channels are being switched across the MegaPAC. Us… |
| 1.3.6.1.4.1.397.4.3.1.57 | chanParamDlciPriority | 0 | 0 | A value from 0 to 32 indicating the relative priority of this DLCI to the other data streams on this trunk, i.e. other DLCIs. The… |
| 1.3.6.1.4.1.397.4.3.1.58 | chanParamDlciATM | 0 | 0 | Determines whether fragmentation should be implemented on frames on this link. |
| 1.3.6.1.4.1.397.4.3.1.59 | chanParamDlciCir | 0 | 0 | The committed information rate for this DLCI - the units are in 80bits/sec |
| 1.3.6.1.4.1.397.4.3.1.60 | chanParamDlciBc | 0 | 0 | Bc(Burst Commit) - the committed burst that the MegaPAC will allow to be transmitted on this DLCI; the units are 80bits. |
| 1.3.6.1.4.1.397.4.3.1.61 | chanParamDlciBe | 0 | 0 | Be(Burst Excess) is the excess above the Bc that will be transmitted to the line by the MegaPAC in any given Tc. The units are 80… |
| 1.3.6.1.4.1.397.4.3.1.62 | chanParamDlciDe | 0 | 0 | DE(Discard Eligibility) when set will indicate that in a congested situation this frame should be discarded first. |
| 1.3.6.1.4.1.397.4.3.1.63 | chanParamDlciProtocol | 0 | 0 | Specifies header in RFC 1480/1490 connections |
| 1.3.6.1.4.1.397.4.3.1.64 | chanParamDlciDsap | 0 | 0 | Used in RFC 1490 SNA connections - each SAP identifies a specific PU, hence by using different SAPs, multiple PUs can be multipl… |
| 1.3.6.1.4.1.397.4.3.1.65 | chanParamDlciSsap | 0 | 0 | Used in RFC 1490 SNA connections - each SAP identifies a specific PU, hence by using different SAPs, multiple PUs can be multipl… |
| 1.3.6.1.4.1.397.4.3.1.66 | chanParamDlciPutype | 0 | 0 | Used in RFC 1490 SNA connections - specifies type 2.0 or 2.1 |