The Maximum Interval for Auth Status Polling
Parsed from file USR-USER-MAN-MIB.mib.txt
Company: None
Module: USR-USER-MAN-MIB
The Maximum Interval for Auth Status Polling
Parsed from file USR-USER-MAN-MIB.mib
Module: USR-USER-MAN-MIB
Vendor: UTStarcom Incorporated
Module: USR-USER-MAN-MIB
[Automatically extracted from oidview.com]
usrRadiusAuthStatusPollMaxInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Maximum Interval for Auth Status Polling" ::= { usrUserManGroup 183 }
usrRadiusAuthStatusPollMaxInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Maximum Interval for Auth Status Polling" ::= { usrUserManGroup 183 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.2.1.183.0 | usrRadiusAuthStatusPollMaxInterval | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.429.4.2.1.133 | usrUserManRadiusFirstBackupAuthNoResponse | 1 | 1 | The number of times first backup radius server fails to answer an authentication request |
| 1.3.6.1.4.1.429.4.2.1.134 | usrUserManRadiusSecondBackupAuthNoResponse | 1 | 1 | The number of times secondary backup radius server fails to answer an authentication request |
| 1.3.6.1.4.1.429.4.2.1.135 | usrUserManRadiusCounterResetTime | 1 | 1 | Daily time we reset all the authentication counter contains to value zero |
| 1.3.6.1.4.1.429.4.2.1.136 | usrUserManRadiusResetAuthCountersToZero | 1 | 1 | An user action to reset all the authentication counter contains to value zero |
| 1.3.6.1.4.1.429.4.2.1.137 | usrUserManRadiusAcctCounterResetTime | 1 | 1 | Daily time we reset all the accounting counter contains to value zero |
| 1.3.6.1.4.1.429.4.2.1.138 | usrUserManRadiusResetAcctCountersToZero | 1 | 1 | An user action to reset all the accounting counter contains to value zero |
| 1.3.6.1.4.1.429.4.2.1.139 | usrUserManVTSTermTable | 1 | 6 | None |
| 1.3.6.1.4.1.429.4.2.1.140 | usrUserManVTSVerifyTable | 1 | 3 | None |
| 1.3.6.1.4.1.429.4.2.1.141 | usrUserManMaxLocalUsers | 1 | 1 | Maximum Local users that may be supported on the card |
| 1.3.6.1.4.1.429.4.2.1.142 | usrUserManRadiusSrcPortAuth | 1 | 1 | This flag state whether to use check the response radius source port same at that configured in the system. The default value is … |
| 1.3.6.1.4.1.429.4.2.1.143 | usrUserManRadiusUseRadUsername | 1 | 1 | This flag states whether to use the radius supplied username in the access-accept packet to override the username in the request… |
| 1.3.6.1.4.1.429.4.2.1.144 | usrResourceMgmtState | 1 | 1 | Whether the Resource Management is enabled or disabled. |
| 1.3.6.1.4.1.429.4.2.1.145 | usrResourceMgmtQueriesReceivedPrimary | 1 | 1 | Number of Resource Management Queries received from the Primary server. |
| 1.3.6.1.4.1.429.4.2.1.146 | usrResourceMgmtQueryResponsesPrimary | 1 | 1 | Number of Resource Management Query Responses sent to the Primary server. |
| 1.3.6.1.4.1.429.4.2.1.147 | usrResourceMgmtReclaimsReceivedPrimary | 1 | 1 | Number of Resource Management Reclaims received from the Primary server. |
| 1.3.6.1.4.1.429.4.2.1.148 | usrResourceMgmtFreeSendPrimary | 1 | 1 | Number of successful Resource Management Frees sent to the Primary server. |
| 1.3.6.1.4.1.429.4.2.1.149 | usrResourceMgmtFreeRexmitPrimary | 1 | 1 | Number of Resource Management Frees retransmitted to the Primary server. |
| 1.3.6.1.4.1.429.4.2.1.150 | usrResourceMgmtQueriesReceivedSecondary | 1 | 1 | Number of Resource Management Queries received from the Secondary server. |
| 1.3.6.1.4.1.429.4.2.1.151 | usrResourceMgmtQueryResponsesSecondary | 1 | 1 | Number of Resource Management Query Responses sent to the Secondary server. |
| 1.3.6.1.4.1.429.4.2.1.152 | usrResourceMgmtReclaimsReceivedSecondary | 1 | 1 | Number of Resource Management Reclaims received from the Secondary server. |
| 1.3.6.1.4.1.429.4.2.1.153 | usrResourceMgmtFreeSendSecondary | 1 | 1 | Number of successful Resource Management Frees sent to the Secondary server. |
| 1.3.6.1.4.1.429.4.2.1.154 | usrResourceMgmtFreeRexmitSecondary | 1 | 1 | Number of Resource Management Frees retransmitted to the Secondary server. |
| 1.3.6.1.4.1.429.4.2.1.155 | usrResourceMgmtQueriesReceivedTertiary | 1 | 1 | Number of Resource Management Queries received from the Tertiary server. |
| 1.3.6.1.4.1.429.4.2.1.156 | usrResourceMgmtQueryResponsesTertiary | 1 | 1 | Number of Resource Management Query Responses sent to the Tertiary server. |
| 1.3.6.1.4.1.429.4.2.1.157 | usrResourceMgmtReclaimsReceivedTertiary | 1 | 1 | Number of Resource Management Reclaims received from the Tertiary server. |
| 1.3.6.1.4.1.429.4.2.1.158 | usrResourceMgmtFreeSendTertiary | 1 | 1 | Number of successful Resource Management Frees sent to the Tertiary server. |
| 1.3.6.1.4.1.429.4.2.1.159 | usrResourceMgmtFreeRexmitTertiary | 1 | 1 | Number of Resource Management Frees retransmitted to the Tertiary server. |
| 1.3.6.1.4.1.429.4.2.1.160 | usrRadiusAccountingAttributeStyle | 1 | 1 | Takes STANDARD or Netserver style for accounting attribute values. For wireless the default is standard or THREEG_ACCT_ATTR_FORM… |
| 1.3.6.1.4.1.429.4.2.1.161 | usrResetResourceMgmtCountersToZero | 1 | 1 | An user action to reset all the resource management counters to zero |
| 1.3.6.1.4.1.429.4.2.1.162 | usrResetResourceMgmtCountersResetTime | 1 | 1 | Time the resource management counters were last reset to value zero. |
| 1.3.6.1.4.1.429.4.2.1.163 | usrUserManRadiusAcctPrimaryServerGroupCounterResetTime | 1 | 1 | Daily time we reset all the accounting counters for primary group to value zero |
| 1.3.6.1.4.1.429.4.2.1.164 | usrUserManRadiusAcctSecondaryServerGroupCounterResetTime | 1 | 1 | Daily time we reset all the accounting counters for secondary group to value zero |
| 1.3.6.1.4.1.429.4.2.1.165 | usrRadiusSendAcctUnauthRecord | 1 | 1 | Whether the Sending unauthenticated STOP records is enabled or disabled. |
| 1.3.6.1.4.1.429.4.2.1.166 | usrUserManRadiusDefaultUserAcct | 1 | 1 | Whether to send accounting records for default users. This object is not used in wireless applications. |
| 1.3.6.1.4.1.429.4.2.1.167 | usrUserManTunnelAuthenName | 1 | 1 | This option is used for l2tp tunnel authentication. Default/Disabled - System Transmit Authentication Name Enabled - Used domain … |
| 1.3.6.1.4.1.429.4.2.1.168 | usrPrimaryAuthContactInterval | 1 | 1 | Number of seconds since the Primary Radius authentication server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.169 | usrSecondaryAuthContactInterval | 1 | 1 | Number of seconds since the Secondary Radius authentication server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.170 | usrTertiaryAuthContactInterval | 1 | 1 | Number of seconds since the Tertiary Radius authentication server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.171 | usrAcctGrp1PriContactInterval | 1 | 1 | Number of seconds since the Group 1 Primary Accounting server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.172 | usrAcctGrp1FrstBkpContactInterval | 1 | 1 | Number of seconds since the Group 1 First backup accounting server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.173 | usrAcctGrp1SecBkpContactInterval | 1 | 1 | Number of seconds since the Group 1 Second Backup Accounting server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.174 | usrAcctGrp2PriContactInterval | 1 | 1 | Number of seconds since the Group 2 Primary Accounting server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.175 | usrAcctGrp2FrstBkpContactInterval | 1 | 1 | Number of seconds since the Group 2 First backup accounting server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.176 | usrAcctGrp2SecBkpContactInterval | 1 | 1 | Number of seconds since the Group 2 Second backup accounting server was last contacted. |
| 1.3.6.1.4.1.429.4.2.1.177 | usrUserManSyslogFormat | 1 | 1 | Syslog message Format. Specifies which syslog style format is in effect out of the possible range of selections. |
| 1.3.6.1.4.1.429.4.2.1.178 | usrUserManIPOnlyForPrimaryLink | 1 | 1 | This is the switch to enable/disable sending 0.0.0.0 ip address for any non primary link in the accounting records. |
| 1.3.6.1.4.1.429.4.2.1.179 | usrRadiusAccountingPrioritiseFirstServer | 1 | 1 | This switch is to enable/disable prioritisation of the first server in each server group |
| 1.3.6.1.4.1.429.4.2.1.180 | usrUserManOnlySTOPforFailedService | 1 | 1 | After successful authentication, if the required service start for the user fails, just send acct STOP |
| 1.3.6.1.4.1.429.4.2.1.181 | usrRadiusSendAcctAuthServiceType | 1 | 1 | Whether the Sending of service type in auth-request enabled or disabled. |
| 1.3.6.1.4.1.429.4.2.1.182 | usrRadiusAuthStatusPollInitInterval | 1 | 1 | The Initial Interval for Auth Status Polling |
| 1.3.6.1.4.1.429.4.2.1.184 | usrRadiusAuthStatusPollIncInterval | 1 | 1 | The interval increment for Auth Status Polling |
| 1.3.6.1.4.1.429.4.2.1.185 | usrRadiusAuthStatusServerUpRetry | 1 | 1 | The number of status server tries before making the server from down to up |
| 1.3.6.1.4.1.429.4.2.1.186 | usrRadiusAuthStatusServerDownRetry | 1 | 1 | The number of status server retries before making the server from up to down |
| 1.3.6.1.4.1.429.4.2.1.187 | usrRadiusAuthStatusPrimServer | 1 | 1 | The status of the primary server |
| 1.3.6.1.4.1.429.4.2.1.188 | usrRadiusAuthStatusSecServer | 1 | 1 | The status of the secondary server |
| 1.3.6.1.4.1.429.4.2.1.189 | usrRadiusAuthStatusTerServer | 1 | 1 | The status of the tertiary server |
| 1.3.6.1.4.1.429.4.2.1.190 | usrRadiusDNISAuthServiceType | 1 | 1 | The service type set fot DNIS authenticaton request. Default is 10 |
| 1.3.6.1.4.1.429.4.2.1.194 | usrRadiusVTPAccountingFlag | 1 | 1 | Flag which decides whether to send acct records for VTP tunnel users or not |
| 1.3.6.1.4.1.429.4.2.1.199 | uumAAAGlobalOpStatusRenewIntvl | 1 | 1 | Time to reenable operationally down servers |
| 1.3.6.1.4.1.429.4.2.1.200 | uumAAAGlobalTotalRetransmit | 1 | 1 | Total Retransmit, same as RadiusOthers.radius_retrans |
| 1.3.6.1.4.1.429.4.2.1.201 | usrPortIdStyle | 1 | 1 | Port Id generation style. The value of 1 means that the port id will be given from a contiguous space. The value 2 means the lowe… |
| 1.3.6.1.4.1.429.4.2.1.202 | usrResourceReclaimStyle | 1 | 1 | Whether resource reclaim is done in MCI style or the IETF draft style Default is DRAFT style |
| 1.3.6.1.4.1.429.4.2.1.203 | usrAuthSyslogState | 1 | 1 | This value states whether the Authentication information is sent in the syslogs. |
| 1.3.6.1.4.1.429.4.2.1.204 | usrAcctSyslogState | 1 | 1 | This value states whether the Accounting information is sent in the syslogs. |
| 1.3.6.1.4.1.429.4.2.1.205 | usrAuthSyslogReset | 1 | 1 | This value states whether or not the authentication counters will be reset at a configured interval. |
| 1.3.6.1.4.1.429.4.2.1.206 | usrAcctSyslogReset | 1 | 1 | This value states whether or not the accounting counters will be reset at a configured interval. |
| 1.3.6.1.4.1.429.4.2.1.207 | usrAuthSyslogFrequency | 1 | 1 | This object specifies the time interval after which the authentication counters will be reset to zero. |
| 1.3.6.1.4.1.429.4.2.1.208 | usrAcctSyslogFrequency | 1 | 1 | This object specifies the time interval after which the accounting counters will be reset to zero. |
| 1.3.6.1.4.1.429.4.2.1.209 | usrUserManRadiusPrimaryPref | 1 | 1 | Primary Auth Server preference value when using PREFERED algorithm |
| 1.3.6.1.4.1.429.4.2.1.210 | usrUserManRadiusSecondaryPref | 1 | 1 | Secondary Auth Server preference value when using PREFERED algorithm |
| 1.3.6.1.4.1.429.4.2.1.211 | usrUserManRadiusTertiaryPref | 1 | 1 | Tertiary Auth Server preference value when using PREFERED algorithm |
| 1.3.6.1.4.1.429.4.2.1.212 | usrUserManPerServerRetryCount | 1 | 1 | Per Server Retry Count when using PREFERED algorithm |
| 1.3.6.1.4.1.429.4.2.1.213 | usrUserManPerAcctServerRetryCount | 1 | 1 | Per Server Retry Count for Acct Servers |
| 1.3.6.1.4.1.429.4.2.1.214 | usrUserManRadiusAcctCDRState | 1 | 1 | Indicates whether to send Call Detail Record in ACCT Stop req. |
| 1.3.6.1.4.1.429.4.2.1.215 | usrUserManRadiusAcctAggregateRoundRobinCount | 1 | 1 | The total number of times the servers are switched in the primary and secondary server group |
| 1.3.6.1.4.1.429.4.2.1.216 | usrUserManRadiusAcctAggregatePacketDiscardCount | 1 | 1 | The total number of packets discarded in the primary and secondary server group |
| 1.3.6.1.4.1.429.4.2.1.217 | usrUserManRadiusAcctAverageQueuePercentFull | 1 | 1 | The average of percentage of the queue filled in the primary and secondary server group |
| 1.3.6.1.4.1.429.4.2.1.218 | usrUserManRadiusAcctAggregateOutstandingPacketCount | 1 | 1 | The total number of packets outstanding in the primary and secondary server group |
| 1.3.6.1.4.1.429.4.2.1.219 | uumPrioratizeAuthServer | 1 | 1 | In Round Robin Feature, Try the first auth server initially |
| 1.3.6.1.4.1.429.4.2.1.220 | usrResourceFreeForTunnelInitiator | 1 | 1 | For a tunneled call(l2tp/pptp) user get authenticated at both call initiator and call terminator thus uses 2 resources. If enable… |
| 1.3.6.1.4.1.429.4.2.1.222 | usrRebootIndicationStyle | 1 | 1 | Whether reboot indiaction is sent in fall-through fashion or in round-robin manner according to server preference. Default is fal… |
| 1.3.6.1.4.1.429.4.2.1.223 | usrUserManRadiusAcctPrimaryPref | 1 | 1 | Primary Acct Server preference value |
| 1.3.6.1.4.1.429.4.2.1.224 | usrUserManRadiusAcctSecondaryPref | 1 | 1 | Secondary Acct Server preference value |
| 1.3.6.1.4.1.429.4.2.1.225 | usrUserManRadiusAcctBackupPrimaryFirstPref | 1 | 1 | Acct Server preference value |
| 1.3.6.1.4.1.429.4.2.1.226 | usrUserManRadiusAcctBackupPrimarySecondPref | 1 | 1 | Acct Server preference value |
| 1.3.6.1.4.1.429.4.2.1.227 | usrUserManRadiusAcctBackupSecondaryFirstPref | 1 | 1 | Acct Server preference value |
| 1.3.6.1.4.1.429.4.2.1.228 | usrUserManRadiusAcctBackupSecondarySecondPref | 1 | 1 | Acct Server preference value |
| 1.3.6.1.4.1.429.4.2.1.229 | uumAAAGlobalRealmPassword | 1 | 1 | The password for the user send to RADIUS realm directed req case. Reading this object will return NULL. |
| 1.3.6.1.4.1.429.4.2.1.231 | usrUserManAuthFailTrapsState | 1 | 1 | Whether the User Authentication Failure Trap is enabled or disabled. |
| 1.3.6.1.4.1.429.4.2.1.232 | usrUserManNAIConfigTable | 1 | 10 | A table for configuring NAI construction in case there is no authentication. |
| 1.3.6.1.4.1.429.4.2.1.233 | usrUserManTODConfigTable | 1 | 6 | A table for configuring Time Of Day Timer. |
| ... | ||||