Vendor: UTStarcom Incorporated
Module: USR-USER-MAN-MIB
[Automatically extracted from oidview.com]
usrUserManGroup OBJECT IDENTIFIER ::= { usrUserMan 1 }
usrUserManGroup OBJECT IDENTIFIER ::= { usrUserMan 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.429.4.2.1.1 | usrUserManRadiusIP | 1 | 1 | The IP address of the RADIUS server |
1.3.6.1.4.1.429.4.2.1.2 | usrUserManRadiusAltIP | 1 | 1 | The alternate IP address of the RADIUS server |
1.3.6.1.4.1.429.4.2.1.3 | usrUserManRadiusAcctIP | 1 | 1 | The IP address of the RADIUS accounting server |
1.3.6.1.4.1.429.4.2.1.4 | usrUserManRadiusAcctAltIP | 1 | 1 | The IP address of the RADIUS alternate accounting server |
1.3.6.1.4.1.429.4.2.1.5 | usrUserManLocalAuthSuccesses | 1 | 1 | The number of local authentication successes |
1.3.6.1.4.1.429.4.2.1.6 | usrUserManLocalAuthFails | 1 | 1 | The number of local authentication failures |
1.3.6.1.4.1.429.4.2.1.7 | usrUserManRadiusAuthSuccesses | 1 | 1 | The number of radius authentication successes |
1.3.6.1.4.1.429.4.2.1.8 | usrUserManRadiusAuthFails | 1 | 1 | The number of radius authentication failures |
1.3.6.1.4.1.429.4.2.1.9 | usrUserManLocalUsers | 1 | 1 | The number of local users |
1.3.6.1.4.1.429.4.2.1.10 | usrUserManActiveUsers | 1 | 1 | The number of active users |
1.3.6.1.4.1.429.4.2.1.11 | usrUserManRetransmissions | 1 | 1 | The number of udp packet retransmissions |
1.3.6.1.4.1.429.4.2.1.12 | usrUserManUdpReceives | 1 | 1 | The number of udp packets received |
1.3.6.1.4.1.429.4.2.1.13 | usrUserManRadiusRetrans | 1 | 1 | The maximum number of times a timeout will occur when communicating with radius |
1.3.6.1.4.1.429.4.2.1.14 | usrUserManRadiusTimeout | 1 | 1 | The maximum amount of time in seconds we will wait for a RADIUS response before retransmitting |
1.3.6.1.4.1.429.4.2.1.15 | usrUserManAcctRetrans | 1 | 1 | The maximum number of times a timeout will occur when communicating with radius accounting server |
1.3.6.1.4.1.429.4.2.1.16 | usrUserManAcctTimeout | 1 | 1 | The maximum amount of time in seconds we will wait for a RADIUS accounting response before retransmitting |
1.3.6.1.4.1.429.4.2.1.17 | usrUserManLocalAuth | 1 | 1 | Is local authentication on or off |
1.3.6.1.4.1.429.4.2.1.18 | usrUserManAcct | 1 | 1 | Is accounting on or off |
1.3.6.1.4.1.429.4.2.1.19 | usrUserManAcctServers | 1 | 1 | Do we want to consider both servers specified as primary |
1.3.6.1.4.1.429.4.2.1.20 | usrUserManRadiusAuth | 1 | 1 | Is radius authentication on or off |
1.3.6.1.4.1.429.4.2.1.21 | usrUserManStartAccountTime | 1 | 1 | When do we want to account from |
1.3.6.1.4.1.429.4.2.1.22 | usrUserManSnmpAccess | 1 | 1 | Do we allow snmp to set our user table |
1.3.6.1.4.1.429.4.2.1.23 | usrUserManSaveUsers | 1 | 1 | If we hit the save flag the users will be saved to flash |
1.3.6.1.4.1.429.4.2.1.24 | usrUserManRadiusSecret | 1 | 1 | The shared secret between the RADIUS server and pilgrim |
1.3.6.1.4.1.429.4.2.1.25 | usrUserManTable | 1 | 152 | None |
1.3.6.1.4.1.429.4.2.1.26 | usrUserManCfmFileName | 1 | 1 | The name of the configuration file |
1.3.6.1.4.1.429.4.2.1.27 | usrUserManCfmSaveFlag | 1 | 1 | The Configuration File Manager Flag for saving user management scalars |
1.3.6.1.4.1.429.4.2.1.28 | usrUserManRadiusPort | 1 | 1 | The udp port the primary radius server listens at |
1.3.6.1.4.1.429.4.2.1.29 | usrUserManRadiusAltPort | 1 | 1 | The udp port the alternate radius server listens at |
1.3.6.1.4.1.429.4.2.1.30 | usrUserManRadiusAltSecret | 1 | 1 | The shared secret between the alternate RADIUS server and pilgrim |
1.3.6.1.4.1.429.4.2.1.31 | usrUserManFramedRouteTable | 1 | 7 | None |
1.3.6.1.4.1.429.4.2.1.32 | usrUserManRadiusAcctSecret, usrUserManPatUdpTable | 2 | 7 | Static entries that map a UDP port number to a local/private IP address/port. Each entry defines a service and the correspondin… |
1.3.6.1.4.1.429.4.2.1.33 | usrUserManRadiusAcctAltSecret, usrUserManPatTcpTable | 2 | 7 | Static entries that map a TCP port number to a local/private IP address/port. Each entry defines a service and the correspondin… |
1.3.6.1.4.1.429.4.2.1.34 | usrUserManRadiusAcctPort, uumNatStatAddrTable | 2 | 6 | The static IP addresses map a Public IP address to a local/ non-public address. No port translation is done for static defined … |
1.3.6.1.4.1.429.4.2.1.35 | usrUserManRadiusAcctAltPort, uumNatDynAddrTable | 2 | 7 | A table of public address pools. A public address is allocated from the pool when a frame traverses a WAN interface with NAT ena… |
1.3.6.1.4.1.429.4.2.1.36 | usrRadiusBusyOutEnabled, usrUserManIPXRouteTable | 2 | 7 | Is the Radius client regularly checking the contact time of the servers so that it can cause the modems to be busied out when the… |
1.3.6.1.4.1.429.4.2.1.37 | usrRadiusHelloFrequency, usrUserManIPXServTable | 2 | 10 | The number of seconds the system can go between messages from the RADIUS servers before it sends a Status-Server request to that … |
1.3.6.1.4.1.429.4.2.1.38 | usrRadiusAuthState | 1 | 1 | If the system is tracking RADIUS servers for service loss busy-out, the state of those server. |
1.3.6.1.4.1.429.4.2.1.39 | usrUserManAddrPoolTable | 1 | 4 | Table of address pools a user is configured for. |
1.3.6.1.4.1.429.4.2.1.40 | usrRadiusAcctState | 1 | 1 | A debug value for debugging the service loss subsystem. |
1.3.6.1.4.1.429.4.2.1.41 | usrRadiusAuthSecsMessage | 1 | 1 | A debug value for debugging the service loss subsystem. |
1.3.6.1.4.1.429.4.2.1.42 | usrRadiusAcctSecsMessage | 1 | 1 | A debug value for debugging the service loss subsystem. |
1.3.6.1.4.1.429.4.2.1.43 | usrRadiusAuthSecsState | 1 | 1 | A debug value for debugging the service loss subsystem. |
1.3.6.1.4.1.429.4.2.1.44 | usrRadiusAcctSecsState | 1 | 1 | A debug value for debugging the service loss subsystem. |
1.3.6.1.4.1.429.4.2.1.45 | usrUserManRadiusAuthNoResponse | 1 | 1 | The number of times radius fails to answer an authentication request |
1.3.6.1.4.1.429.4.2.1.46 | usrUserManActiveSessionTable | 1 | 15 | None |
1.3.6.1.4.1.429.4.2.1.47 | usrUserManSlotSpanChanOffset | 1 | 1 | Offset to add to modem's reported slot/span/channel when reporting this information. Default value is 1 for all platforms except P… |
1.3.6.1.4.1.429.4.2.1.48 | usrUserManHintAssigned | 1 | 1 | Is the hint assigned feature enabled? |
1.3.6.1.4.1.429.4.2.1.49 | usrUserManAuthorEna | 1 | 1 | Is remote authorization on or off |
1.3.6.1.4.1.429.4.2.1.50 | usrUserManTcpPacketsRx | 1 | 1 | The number of TCP packets received |
1.3.6.1.4.1.429.4.2.1.51 | usrUserManTcpPacketsTx | 1 | 1 | The number of TCP packets transmitted |
1.3.6.1.4.1.429.4.2.1.52 | usrUserManAAAServersTable | 1 | 26 | A table of AAA Servers configured. Several default servers are automatically entered. Adding a new entry requires the following o… |
1.3.6.1.4.1.429.4.2.1.53 | usrUserManDirectRequestStatus | 1 | 1 | Is direct request on or off. Not applicable to Wireless products. |
1.3.6.1.4.1.429.4.2.1.54 | usrUserManDirectRequestDelimiter | 1 | 1 | The delimiter string for the direct request service Not applicable to Wireless products. |
1.3.6.1.4.1.429.4.2.1.55 | usrUserManDirectRequestTimeout | 1 | 1 | Timeout feature for the direct request service Not applicable to Wireless products. |
1.3.6.1.4.1.429.4.2.1.56 | usrUserManRadiusVSA | 1 | 1 | Vendor Specific Attribute for the compatibility of Sprint CISCO Server. The default is enabled. |
1.3.6.1.4.1.429.4.2.1.57 | usrUserManRadiusAcctVSA | 1 | 1 | Vendor Specific Attribute for the compatibility of Sprint CISCO Server. The default is enabled. |
1.3.6.1.4.1.429.4.2.1.67 | usrUserManAAADomainTable | 1 | 11 | None |
1.3.6.1.4.1.429.4.2.1.68 | uumAAAGlobalSelectionMask | 1 | 1 | The Selection mask for Server selection Note: This MIB is not supported anymore, a new MIB has been created for this purpose |
1.3.6.1.4.1.429.4.2.1.69 | uumAAAGlobalServersUnavail | 1 | 1 | Behaviour if servers are unavailable. Action can be DENY, PERMIT or If it is a Domain Name it is an Alphanumeric string. It must … |
1.3.6.1.4.1.429.4.2.1.70 | uumAAAGlobalSearchAlg | 1 | 1 | Domain Server Search Algorithm |
1.3.6.1.4.1.429.4.2.1.71 | uumAAAGlobalDNSIpRotation | 1 | 1 | Should this domain be looked up using DNS ? |
1.3.6.1.4.1.429.4.2.1.73 | uumAAAGlobalMirroring | 1 | 1 | Should this Domain info. be mirrored ? |
1.3.6.1.4.1.429.4.2.1.90 | usrUserManReportedPortDensity | 1 | 1 | Used as slot multiplier for modem slot when reporting RADIUS NAS-PORT attribute. The reported NAS-PORT attribute for a call is co… |
1.3.6.1.4.1.429.4.2.1.91 | usrUserManFillNullAttributes | 1 | 1 | This is the switch to enable/disable Filling of Null Attributes in Radius Accounting records |
1.3.6.1.4.1.429.4.2.1.92 | usrUserManRadiusSrcPort | 1 | 1 | The source udp port the primary radius server binds to |
1.3.6.1.4.1.429.4.2.1.93 | usrUserManRadiusAcctSrcPort | 1 | 1 | The source radius port for the primary accounting server |
1.3.6.1.4.1.429.4.2.1.94 | usrUserManRadiusTertiaryIP | 1 | 1 | The tertiary IP address of the RADIUS server |
1.3.6.1.4.1.429.4.2.1.95 | usrUserManRadiusTertiarySecret | 1 | 1 | The radius secret for the tertiary server. Reading this object will return NULL. |
1.3.6.1.4.1.429.4.2.1.96 | usrUserManRadiusTertiaryPort | 1 | 1 | The udp port the tertiary radius server listens at |
1.3.6.1.4.1.429.4.2.1.97 | usrRadiusAuthAlgorithm | 1 | 1 | Takes either the Fall-through or Round-robin algorithm for re-tries |
1.3.6.1.4.1.429.4.2.1.98 | usrRadiusAttributeStyle | 1 | 1 | Takes STANDARD or ASCEND style for attribute values |
1.3.6.1.4.1.429.4.2.1.99 | usrRadiusInterimAccountingIntervalEnabled | 1 | 1 | Indicates whether checkpoint accounting is enabled |
1.3.6.1.4.1.429.4.2.1.100 | usrRadiusInterimAccountingInterval | 1 | 1 | The time intervals when acct. info is sent to the servers |
1.3.6.1.4.1.429.4.2.1.101 | usrUserManPrimAcctStatus | 1 | 1 | Is priamary accounting on or off |
1.3.6.1.4.1.429.4.2.1.102 | usrUserManSecAcctStatus | 1 | 1 | Is secondary accounting on or off |
1.3.6.1.4.1.429.4.2.1.103 | usrUserManRadiusAcctFirstBackupIP | 1 | 1 | The IP address of the Primary RADIUS First backup accounting server |
1.3.6.1.4.1.429.4.2.1.104 | usrUserManRadiusAcctSecondBackupIP | 1 | 1 | The IP address of the Primary RADIUS Second backup accounting server |
1.3.6.1.4.1.429.4.2.1.105 | usrUserManRadiusAcctAltFirstBackupIP | 1 | 1 | The IP address of the Secondary RADIUS First backup accounting server |
1.3.6.1.4.1.429.4.2.1.106 | usrUserManRadiusAcctAltSecondBackupIP | 1 | 1 | The IP address of the Secondary RADIUS Second backup accounting server |
1.3.6.1.4.1.429.4.2.1.107 | usrUserManRadiusAcctFirstBackupSecret | 1 | 1 | The radius secret for the primary first backup accounting server Reading this object will return NULL. |
1.3.6.1.4.1.429.4.2.1.108 | usrUserManRadiusAcctSecondBackupSecret | 1 | 1 | The radius secret for the primary second backup accounting server. Reading this object will return NULL. |
1.3.6.1.4.1.429.4.2.1.109 | usrUserManRadiusAcctAltFirstBackupSecret | 1 | 1 | The radius secret for the secondary first backup accounting server. Reading this object will return NULL. |
1.3.6.1.4.1.429.4.2.1.110 | usrUserManRadiusAcctAltSecondBackupSecret | 1 | 1 | The radius secret for the secondary second backup accounting server Reading this object will return NULL. |
1.3.6.1.4.1.429.4.2.1.111 | usrUserManRadiusAcctFirstBackupPort | 1 | 1 | The radius port for the primary first backup accounting server |
1.3.6.1.4.1.429.4.2.1.112 | usrUserManRadiusAcctSecondBackupPort | 1 | 1 | The radius port for the primary second backup accounting server |
1.3.6.1.4.1.429.4.2.1.113 | usrUserManRadiusAcctAltFirstBackupPort | 1 | 1 | The radius port for the secondary first backup accounting server |
1.3.6.1.4.1.429.4.2.1.114 | usrUserManRadiusAcctAltSecondBackupPort | 1 | 1 | The radius port for the secondary second backup accounting server |
1.3.6.1.4.1.429.4.2.1.115 | usrUserManRadiusAcctRoundRobinCount | 1 | 1 | The number of times the servers are switched in the primary server group |
1.3.6.1.4.1.429.4.2.1.116 | usrUserManRadiusAcctAltRoundRobinCount | 1 | 1 | The number of times the servers are switched in the secondary server group |
1.3.6.1.4.1.429.4.2.1.117 | usrUserManRadiusAcctPacketDiscardCount | 1 | 1 | The number of packets discarded in the primary server group |
1.3.6.1.4.1.429.4.2.1.118 | usrUserManRadiusAcctAltPacketDiscardCount | 1 | 1 | The number of packets discarded in the secondary server group |
1.3.6.1.4.1.429.4.2.1.119 | usrUserManRadiusAcctQueuePercentFull | 1 | 1 | Percentage of the queue filled in the primary server group |
1.3.6.1.4.1.429.4.2.1.120 | usrUserManRadiusAcctAltQueuePercentFull | 1 | 1 | Percentage of the queue filled in the secondary server group |
1.3.6.1.4.1.429.4.2.1.121 | usrUserManRadiusAcctOutstandingPacketCount | 1 | 1 | The number of packets outstanding in the primary server group |
1.3.6.1.4.1.429.4.2.1.122 | usrUserManRadiusAcctAltOutstandingPacketCount | 1 | 1 | The number of packets outstanding in the primary server group |
1.3.6.1.4.1.429.4.2.1.123 | usrTacacsAcctAttrList | 1 | 1 | Specifies the tacacs+ accounting attribute lists requested from different customer like SPRINT .... |
1.3.6.1.4.1.429.4.2.1.124 | usrUserManAcctAltRetrans | 1 | 1 | The maximum number of times a timeout will occur for a secondary server when communicating with radius accounting server |
1.3.6.1.4.1.429.4.2.1.125 | usrUserManLogUnauthenticatedCalls | 1 | 1 | If enabled, all unauthenticated calls will generate a Stop Accounting-Request. If disabled, no Stop Accounting-Requests will be s… |
1.3.6.1.4.1.429.4.2.1.126 | usrUserManRadiusActiveAuthIP | 1 | 1 | The IP address of the Active RADIUS Authentication Server |
1.3.6.1.4.1.429.4.2.1.127 | usrUserManRadiusActiveAcctIPFirst | 1 | 1 | The IP address of the Active RADIUS Accounting Server of First Group |
1.3.6.1.4.1.429.4.2.1.128 | usrUserManRadiusActiveAcctIPSecond | 1 | 1 | The IP address of the Active RADIUS Accounting Server of Second Group |
1.3.6.1.4.1.429.4.2.1.129 | usrUserManRadiusFirstBackupAuthSuccesses | 1 | 1 | The number of first backup radius server authentication successes |
1.3.6.1.4.1.429.4.2.1.130 | usrUserManRadiusFirstBackupAuthFails | 1 | 1 | The number of first backup radius server authentication failures |
1.3.6.1.4.1.429.4.2.1.131 | usrUserManRadiusSecondBackupAuthSuccesses | 1 | 1 | The number of secondary backup radius server authentication successes |
1.3.6.1.4.1.429.4.2.1.132 | usrUserManRadiusSecondBackupAuthFails | 1 | 1 | The number of secondary backup radius server authentication failures |
1.3.6.1.4.1.429.4.2.1.133 | usrUserManRadiusFirstBackupAuthNoResponse | 1 | 1 | The number of times first backup radius server fails to answer an authentication request |
1.3.6.1.4.1.429.4.2.1.134 | usrUserManRadiusSecondBackupAuthNoResponse | 1 | 1 | The number of times secondary backup radius server fails to answer an authentication request |
1.3.6.1.4.1.429.4.2.1.135 | usrUserManRadiusCounterResetTime | 1 | 1 | Daily time we reset all the authentication counter contains to value zero |
1.3.6.1.4.1.429.4.2.1.136 | usrUserManRadiusResetAuthCountersToZero | 1 | 1 | An user action to reset all the authentication counter contains to value zero |
1.3.6.1.4.1.429.4.2.1.137 | usrUserManRadiusAcctCounterResetTime | 1 | 1 | Daily time we reset all the accounting counter contains to value zero |
1.3.6.1.4.1.429.4.2.1.138 | usrUserManRadiusResetAcctCountersToZero | 1 | 1 | An user action to reset all the accounting counter contains to value zero |
1.3.6.1.4.1.429.4.2.1.139 | usrUserManVTSTermTable | 1 | 6 | None |
1.3.6.1.4.1.429.4.2.1.140 | usrUserManVTSVerifyTable | 1 | 3 | None |
1.3.6.1.4.1.429.4.2.1.141 | usrUserManMaxLocalUsers | 1 | 1 | Maximum Local users that may be supported on the card |
1.3.6.1.4.1.429.4.2.1.142 | usrUserManRadiusSrcPortAuth | 1 | 1 | This flag state whether to use check the response radius source port same at that configured in the system. The default value is … |
1.3.6.1.4.1.429.4.2.1.143 | usrUserManRadiusUseRadUsername | 1 | 1 | This flag states whether to use the radius supplied username in the access-accept packet to override the username in the request… |
1.3.6.1.4.1.429.4.2.1.144 | usrResourceMgmtState | 1 | 1 | Whether the Resource Management is enabled or disabled. |
1.3.6.1.4.1.429.4.2.1.145 | usrResourceMgmtQueriesReceivedPrimary | 1 | 1 | Number of Resource Management Queries received from the Primary server. |
1.3.6.1.4.1.429.4.2.1.146 | usrResourceMgmtQueryResponsesPrimary | 1 | 1 | Number of Resource Management Query Responses sent to the Primary server. |
1.3.6.1.4.1.429.4.2.1.147 | usrResourceMgmtReclaimsReceivedPrimary | 1 | 1 | Number of Resource Management Reclaims received from the Primary server. |
1.3.6.1.4.1.429.4.2.1.148 | usrResourceMgmtFreeSendPrimary | 1 | 1 | Number of successful Resource Management Frees sent to the Primary server. |
1.3.6.1.4.1.429.4.2.1.149 | usrResourceMgmtFreeRexmitPrimary | 1 | 1 | Number of Resource Management Frees retransmitted to the Primary server. |
1.3.6.1.4.1.429.4.2.1.150 | usrResourceMgmtQueriesReceivedSecondary | 1 | 1 | Number of Resource Management Queries received from the Secondary server. |
1.3.6.1.4.1.429.4.2.1.151 | usrResourceMgmtQueryResponsesSecondary | 1 | 1 | Number of Resource Management Query Responses sent to the Secondary server. |
1.3.6.1.4.1.429.4.2.1.152 | usrResourceMgmtReclaimsReceivedSecondary | 1 | 1 | Number of Resource Management Reclaims received from the Secondary server. |
1.3.6.1.4.1.429.4.2.1.153 | usrResourceMgmtFreeSendSecondary | 1 | 1 | Number of successful Resource Management Frees sent to the Secondary server. |
1.3.6.1.4.1.429.4.2.1.154 | usrResourceMgmtFreeRexmitSecondary | 1 | 1 | Number of Resource Management Frees retransmitted to the Secondary server. |
1.3.6.1.4.1.429.4.2.1.155 | usrResourceMgmtQueriesReceivedTertiary | 1 | 1 | Number of Resource Management Queries received from the Tertiary server. |
1.3.6.1.4.1.429.4.2.1.156 | usrResourceMgmtQueryResponsesTertiary | 1 | 1 | Number of Resource Management Query Responses sent to the Tertiary server. |
1.3.6.1.4.1.429.4.2.1.157 | usrResourceMgmtReclaimsReceivedTertiary | 1 | 1 | Number of Resource Management Reclaims received from the Tertiary server. |
1.3.6.1.4.1.429.4.2.1.158 | usrResourceMgmtFreeSendTertiary | 1 | 1 | Number of successful Resource Management Frees sent to the Tertiary server. |
1.3.6.1.4.1.429.4.2.1.159 | usrResourceMgmtFreeRexmitTertiary | 1 | 1 | Number of Resource Management Frees retransmitted to the Tertiary server. |
1.3.6.1.4.1.429.4.2.1.160 | usrRadiusAccountingAttributeStyle | 1 | 1 | Takes STANDARD or Netserver style for accounting attribute values. For wireless the default is standard or THREEG_ACCT_ATTR_FORM… |
1.3.6.1.4.1.429.4.2.1.161 | usrResetResourceMgmtCountersToZero | 1 | 1 | An user action to reset all the resource management counters to zero |
1.3.6.1.4.1.429.4.2.1.162 | usrResetResourceMgmtCountersResetTime | 1 | 1 | Time the resource management counters were last reset to value zero. |
1.3.6.1.4.1.429.4.2.1.163 | usrUserManRadiusAcctPrimaryServerGroupCounterResetTime | 1 | 1 | Daily time we reset all the accounting counters for primary group to value zero |
1.3.6.1.4.1.429.4.2.1.164 | usrUserManRadiusAcctSecondaryServerGroupCounterResetTime | 1 | 1 | Daily time we reset all the accounting counters for secondary group to value zero |
1.3.6.1.4.1.429.4.2.1.165 | usrRadiusSendAcctUnauthRecord | 1 | 1 | Whether the Sending unauthenticated STOP records is enabled or disabled. |
1.3.6.1.4.1.429.4.2.1.166 | usrUserManRadiusDefaultUserAcct | 1 | 1 | Whether to send accounting records for default users. This object is not used in wireless applications. |
1.3.6.1.4.1.429.4.2.1.167 | usrUserManTunnelAuthenName | 1 | 1 | This option is used for l2tp tunnel authentication. Default/Disabled - System Transmit Authentication Name Enabled - Used domain … |
1.3.6.1.4.1.429.4.2.1.168 | usrPrimaryAuthContactInterval | 1 | 1 | Number of seconds since the Primary Radius authentication server was last contacted. |
1.3.6.1.4.1.429.4.2.1.169 | usrSecondaryAuthContactInterval | 1 | 1 | Number of seconds since the Secondary Radius authentication server was last contacted. |
1.3.6.1.4.1.429.4.2.1.170 | usrTertiaryAuthContactInterval | 1 | 1 | Number of seconds since the Tertiary Radius authentication server was last contacted. |
1.3.6.1.4.1.429.4.2.1.171 | usrAcctGrp1PriContactInterval | 1 | 1 | Number of seconds since the Group 1 Primary Accounting server was last contacted. |
1.3.6.1.4.1.429.4.2.1.172 | usrAcctGrp1FrstBkpContactInterval | 1 | 1 | Number of seconds since the Group 1 First backup accounting server was last contacted. |
1.3.6.1.4.1.429.4.2.1.173 | usrAcctGrp1SecBkpContactInterval | 1 | 1 | Number of seconds since the Group 1 Second Backup Accounting server was last contacted. |
1.3.6.1.4.1.429.4.2.1.174 | usrAcctGrp2PriContactInterval | 1 | 1 | Number of seconds since the Group 2 Primary Accounting server was last contacted. |
1.3.6.1.4.1.429.4.2.1.175 | usrAcctGrp2FrstBkpContactInterval | 1 | 1 | Number of seconds since the Group 2 First backup accounting server was last contacted. |
1.3.6.1.4.1.429.4.2.1.176 | usrAcctGrp2SecBkpContactInterval | 1 | 1 | Number of seconds since the Group 2 Second backup accounting server was last contacted. |
1.3.6.1.4.1.429.4.2.1.177 | usrUserManSyslogFormat | 1 | 1 | Syslog message Format. Specifies which syslog style format is in effect out of the possible range of selections. |
1.3.6.1.4.1.429.4.2.1.178 | usrUserManIPOnlyForPrimaryLink | 1 | 1 | This is the switch to enable/disable sending 0.0.0.0 ip address for any non primary link in the accounting records. |
1.3.6.1.4.1.429.4.2.1.179 | usrRadiusAccountingPrioritiseFirstServer | 1 | 1 | This switch is to enable/disable prioritisation of the first server in each server group |
1.3.6.1.4.1.429.4.2.1.180 | usrUserManOnlySTOPforFailedService | 1 | 1 | After successful authentication, if the required service start for the user fails, just send acct STOP |
1.3.6.1.4.1.429.4.2.1.181 | usrRadiusSendAcctAuthServiceType | 1 | 1 | Whether the Sending of service type in auth-request enabled or disabled. |
1.3.6.1.4.1.429.4.2.1.182 | usrRadiusAuthStatusPollInitInterval | 1 | 1 | The Initial Interval for Auth Status Polling |
1.3.6.1.4.1.429.4.2.1.183 | usrRadiusAuthStatusPollMaxInterval | 1 | 1 | The Maximum Interval for Auth Status Polling |
1.3.6.1.4.1.429.4.2.1.184 | usrRadiusAuthStatusPollIncInterval | 1 | 1 | The interval increment for Auth Status Polling |
1.3.6.1.4.1.429.4.2.1.185 | usrRadiusAuthStatusServerUpRetry | 1 | 1 | The number of status server tries before making the server from down to up |
1.3.6.1.4.1.429.4.2.1.186 | usrRadiusAuthStatusServerDownRetry | 1 | 1 | The number of status server retries before making the server from up to down |
1.3.6.1.4.1.429.4.2.1.187 | usrRadiusAuthStatusPrimServer | 1 | 1 | The status of the primary server |
1.3.6.1.4.1.429.4.2.1.188 | usrRadiusAuthStatusSecServer | 1 | 1 | The status of the secondary server |
1.3.6.1.4.1.429.4.2.1.189 | usrRadiusAuthStatusTerServer | 1 | 1 | The status of the tertiary server |
1.3.6.1.4.1.429.4.2.1.190 | usrRadiusDNISAuthServiceType | 1 | 1 | The service type set fot DNIS authenticaton request. Default is 10 |
1.3.6.1.4.1.429.4.2.1.194 | usrRadiusVTPAccountingFlag | 1 | 1 | Flag which decides whether to send acct records for VTP tunnel users or not |
1.3.6.1.4.1.429.4.2.1.199 | uumAAAGlobalOpStatusRenewIntvl | 1 | 1 | Time to reenable operationally down servers |
1.3.6.1.4.1.429.4.2.1.200 | uumAAAGlobalTotalRetransmit | 1 | 1 | Total Retransmit, same as RadiusOthers.radius_retrans |
1.3.6.1.4.1.429.4.2.1.201 | usrPortIdStyle | 1 | 1 | Port Id generation style. The value of 1 means that the port id will be given from a contiguous space. The value 2 means the lowe… |
1.3.6.1.4.1.429.4.2.1.202 | usrResourceReclaimStyle | 1 | 1 | Whether resource reclaim is done in MCI style or the IETF draft style Default is DRAFT style |
1.3.6.1.4.1.429.4.2.1.203 | usrAuthSyslogState | 1 | 1 | This value states whether the Authentication information is sent in the syslogs. |
1.3.6.1.4.1.429.4.2.1.204 | usrAcctSyslogState | 1 | 1 | This value states whether the Accounting information is sent in the syslogs. |
1.3.6.1.4.1.429.4.2.1.205 | usrAuthSyslogReset | 1 | 1 | This value states whether or not the authentication counters will be reset at a configured interval. |
1.3.6.1.4.1.429.4.2.1.206 | usrAcctSyslogReset | 1 | 1 | This value states whether or not the accounting counters will be reset at a configured interval. |
1.3.6.1.4.1.429.4.2.1.207 | usrAuthSyslogFrequency | 1 | 1 | This object specifies the time interval after which the authentication counters will be reset to zero. |
1.3.6.1.4.1.429.4.2.1.208 | usrAcctSyslogFrequency | 1 | 1 | This object specifies the time interval after which the accounting counters will be reset to zero. |
1.3.6.1.4.1.429.4.2.1.209 | usrUserManRadiusPrimaryPref | 1 | 1 | Primary Auth Server preference value when using PREFERED algorithm |
1.3.6.1.4.1.429.4.2.1.210 | usrUserManRadiusSecondaryPref | 1 | 1 | Secondary Auth Server preference value when using PREFERED algorithm |
1.3.6.1.4.1.429.4.2.1.211 | usrUserManRadiusTertiaryPref | 1 | 1 | Tertiary Auth Server preference value when using PREFERED algorithm |
1.3.6.1.4.1.429.4.2.1.212 | usrUserManPerServerRetryCount | 1 | 1 | Per Server Retry Count when using PREFERED algorithm |
1.3.6.1.4.1.429.4.2.1.213 | usrUserManPerAcctServerRetryCount | 1 | 1 | Per Server Retry Count for Acct Servers |
1.3.6.1.4.1.429.4.2.1.214 | usrUserManRadiusAcctCDRState | 1 | 1 | Indicates whether to send Call Detail Record in ACCT Stop req. |
1.3.6.1.4.1.429.4.2.1.215 | usrUserManRadiusAcctAggregateRoundRobinCount | 1 | 1 | The total number of times the servers are switched in the primary and secondary server group |
1.3.6.1.4.1.429.4.2.1.216 | usrUserManRadiusAcctAggregatePacketDiscardCount | 1 | 1 | The total number of packets discarded in the primary and secondary server group |
1.3.6.1.4.1.429.4.2.1.217 | usrUserManRadiusAcctAverageQueuePercentFull | 1 | 1 | The average of percentage of the queue filled in the primary and secondary server group |
1.3.6.1.4.1.429.4.2.1.218 | usrUserManRadiusAcctAggregateOutstandingPacketCount | 1 | 1 | The total number of packets outstanding in the primary and secondary server group |
1.3.6.1.4.1.429.4.2.1.219 | uumPrioratizeAuthServer | 1 | 1 | In Round Robin Feature, Try the first auth server initially |
1.3.6.1.4.1.429.4.2.1.220 | usrResourceFreeForTunnelInitiator | 1 | 1 | For a tunneled call(l2tp/pptp) user get authenticated at both call initiator and call terminator thus uses 2 resources. If enable… |
1.3.6.1.4.1.429.4.2.1.222 | usrRebootIndicationStyle | 1 | 1 | Whether reboot indiaction is sent in fall-through fashion or in round-robin manner according to server preference. Default is fal… |
1.3.6.1.4.1.429.4.2.1.223 | usrUserManRadiusAcctPrimaryPref | 1 | 1 | Primary Acct Server preference value |
1.3.6.1.4.1.429.4.2.1.224 | usrUserManRadiusAcctSecondaryPref | 1 | 1 | Secondary Acct Server preference value |
1.3.6.1.4.1.429.4.2.1.225 | usrUserManRadiusAcctBackupPrimaryFirstPref | 1 | 1 | Acct Server preference value |
1.3.6.1.4.1.429.4.2.1.226 | usrUserManRadiusAcctBackupPrimarySecondPref | 1 | 1 | Acct Server preference value |
1.3.6.1.4.1.429.4.2.1.227 | usrUserManRadiusAcctBackupSecondaryFirstPref | 1 | 1 | Acct Server preference value |
1.3.6.1.4.1.429.4.2.1.228 | usrUserManRadiusAcctBackupSecondarySecondPref | 1 | 1 | Acct Server preference value |
1.3.6.1.4.1.429.4.2.1.229 | uumAAAGlobalRealmPassword | 1 | 1 | The password for the user send to RADIUS realm directed req case. Reading this object will return NULL. |
1.3.6.1.4.1.429.4.2.1.231 | usrUserManAuthFailTrapsState | 1 | 1 | Whether the User Authentication Failure Trap is enabled or disabled. |
1.3.6.1.4.1.429.4.2.1.232 | usrUserManNAIConfigTable | 1 | 10 | A table for configuring NAI construction in case there is no authentication. |
1.3.6.1.4.1.429.4.2.1.233 | usrUserManTODConfigTable | 1 | 6 | A table for configuring Time Of Day Timer. |
1.3.6.1.4.1.429.4.2.1.235 | usrUserManTODTimerEnabled | 1 | 1 | Whether TOD timer accounting is enabled |
1.3.6.1.4.1.429.4.2.1.236 | usrUserManActiveStopTriggerEnabled | 1 | 1 | Whether Active Stop Airlink Record triggered accounting is enabled |
1.3.6.1.4.1.429.4.2.1.244 | usrUserMan3GAcctAttrFormat | 1 | 1 | This flags determines whether PDSN will send accounting attributes in 3G format, 3Com VSA format, 3G and legacy Radius format |
1.3.6.1.4.1.429.4.2.1.245 | uumAAAGlobalEnableLogUnauthenticatedCalls | 1 | 1 | Is the AAA Global Log Unauthenticated Calls Enabled or disabled. The default is enabled. |
1.3.6.1.4.1.429.4.2.1.246 | uumAAAGlobalEnableUseAAAUserName | 1 | 1 | Is the AAA Global Use AAA USER NAME is Enabled or disabled. The default is disabled. |
1.3.6.1.4.1.429.4.2.1.248 | usrUserManHarpDownDetectionTimer | 1 | 1 | The longest time without responses from HARP/AAA in which HARP/AAA need to be marked Out of Service |
1.3.6.1.4.1.429.4.2.1.249 | usrUserManHarpUpDetectionScheme | 1 | 1 | Flag to indicate whether the HARP/AAA needs to be marked 'Up' based purely on the up timer or based upon either a timer or respon… |
1.3.6.1.4.1.429.4.2.1.255 | usrUserManAdminAcct | 1 | 1 | Is accounting for admin users on or off |
1.3.6.1.4.1.429.4.2.1.256 | usrCorrelationIdFromFacn | 1 | 1 | This value states whether or not use correlation id received from facn, when facn interface is enabled. |
1.3.6.1.4.1.429.4.2.1.258 | uumAAAGlobalDomainSelectionMask | 1 | 1 | Domain selection mask |
1.3.6.1.4.1.429.4.2.1.259 | usrUserManHarpDownDetectionScheme | 1 | 1 | Flag to indicate whether the HARP/AAA needs to be marked 'Down' based on tbe count of no-responses to the HARP/AAA or based on th… |
1.3.6.1.4.1.429.4.2.1.260 | usrUserManAAADownTrapsState | 1 | 1 | Whether the HARP/AAA Down Trap is enabled or disabled. |
1.3.6.1.4.1.429.4.2.1.261 | usrUserManAAAUpTrapsState | 1 | 1 | Whether the HARP/AAA Up Trap is enabled or disabled. |
1.3.6.1.4.1.429.4.2.1.270 | usrUserManDomainSelection | 1 | 1 | Domain selection from NAI: enabled or disabled |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.429.4.2.2 | usrUserManTraps | 1 | 6 | None |