Should this domain be looked up using DNS ?
Parsed from file USR-USER-MAN-MIB.mib.txt
Company: None
Module: USR-USER-MAN-MIB
Should this domain be looked up using DNS ?
Parsed from file USR-USER-MAN-MIB.mib
Module: USR-USER-MAN-MIB
Vendor: UTStarcom Incorporated
Module: USR-USER-MAN-MIB
[Automatically extracted from oidview.com]
uumAAAGlobalDNSIpRotation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Should this domain be looked up using DNS ? " ::= { usrUserManGroup 71 }
uumAAAGlobalDNSIpRotation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Should this domain be looked up using DNS ? " ::= { usrUserManGroup 71 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.2.1.71.0 | uumAAAGlobalDNSIpRotation | 0 | 0 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.429.4.2.1.21 | usrUserManStartAccountTime | 1 | 1 | When do we want to account from |
| 1.3.6.1.4.1.429.4.2.1.22 | usrUserManSnmpAccess | 1 | 1 | Do we allow snmp to set our user table |
| 1.3.6.1.4.1.429.4.2.1.23 | usrUserManSaveUsers | 1 | 1 | If we hit the save flag the users will be saved to flash |
| 1.3.6.1.4.1.429.4.2.1.24 | usrUserManRadiusSecret | 1 | 1 | The shared secret between the RADIUS server and pilgrim |
| 1.3.6.1.4.1.429.4.2.1.25 | usrUserManTable | 1 | 152 | None |
| 1.3.6.1.4.1.429.4.2.1.26 | usrUserManCfmFileName | 1 | 1 | The name of the configuration file |
| 1.3.6.1.4.1.429.4.2.1.27 | usrUserManCfmSaveFlag | 1 | 1 | The Configuration File Manager Flag for saving user management scalars |
| 1.3.6.1.4.1.429.4.2.1.28 | usrUserManRadiusPort | 1 | 1 | The udp port the primary radius server listens at |
| 1.3.6.1.4.1.429.4.2.1.29 | usrUserManRadiusAltPort | 1 | 1 | The udp port the alternate radius server listens at |
| 1.3.6.1.4.1.429.4.2.1.30 | usrUserManRadiusAltSecret | 1 | 1 | The shared secret between the alternate RADIUS server and pilgrim |
| 1.3.6.1.4.1.429.4.2.1.31 | usrUserManFramedRouteTable | 1 | 7 | None |
| 1.3.6.1.4.1.429.4.2.1.32 | usrUserManRadiusAcctSecret, usrUserManPatUdpTable | 2 | 7 | Static entries that map a UDP port number to a local/private IP address/port. Each entry defines a service and the correspondin… |
| 1.3.6.1.4.1.429.4.2.1.33 | usrUserManRadiusAcctAltSecret, usrUserManPatTcpTable | 2 | 7 | Static entries that map a TCP port number to a local/private IP address/port. Each entry defines a service and the correspondin… |
| 1.3.6.1.4.1.429.4.2.1.34 | usrUserManRadiusAcctPort, uumNatStatAddrTable | 2 | 6 | The static IP addresses map a Public IP address to a local/ non-public address. No port translation is done for static defined … |
| 1.3.6.1.4.1.429.4.2.1.35 | usrUserManRadiusAcctAltPort, uumNatDynAddrTable | 2 | 7 | A table of public address pools. A public address is allocated from the pool when a frame traverses a WAN interface with NAT ena… |
| 1.3.6.1.4.1.429.4.2.1.36 | usrRadiusBusyOutEnabled, usrUserManIPXRouteTable | 2 | 7 | Is the Radius client regularly checking the contact time of the servers so that it can cause the modems to be busied out when the… |
| 1.3.6.1.4.1.429.4.2.1.37 | usrRadiusHelloFrequency, usrUserManIPXServTable | 2 | 10 | The number of seconds the system can go between messages from the RADIUS servers before it sends a Status-Server request to that … |
| 1.3.6.1.4.1.429.4.2.1.38 | usrRadiusAuthState | 1 | 1 | If the system is tracking RADIUS servers for service loss busy-out, the state of those server. |
| 1.3.6.1.4.1.429.4.2.1.39 | usrUserManAddrPoolTable | 1 | 4 | Table of address pools a user is configured for. |
| 1.3.6.1.4.1.429.4.2.1.40 | usrRadiusAcctState | 1 | 1 | A debug value for debugging the service loss subsystem. |
| 1.3.6.1.4.1.429.4.2.1.41 | usrRadiusAuthSecsMessage | 1 | 1 | A debug value for debugging the service loss subsystem. |
| 1.3.6.1.4.1.429.4.2.1.42 | usrRadiusAcctSecsMessage | 1 | 1 | A debug value for debugging the service loss subsystem. |
| 1.3.6.1.4.1.429.4.2.1.43 | usrRadiusAuthSecsState | 1 | 1 | A debug value for debugging the service loss subsystem. |
| 1.3.6.1.4.1.429.4.2.1.44 | usrRadiusAcctSecsState | 1 | 1 | A debug value for debugging the service loss subsystem. |
| 1.3.6.1.4.1.429.4.2.1.45 | usrUserManRadiusAuthNoResponse | 1 | 1 | The number of times radius fails to answer an authentication request |
| 1.3.6.1.4.1.429.4.2.1.46 | usrUserManActiveSessionTable | 1 | 15 | None |
| 1.3.6.1.4.1.429.4.2.1.47 | usrUserManSlotSpanChanOffset | 1 | 1 | Offset to add to modem's reported slot/span/channel when reporting this information. Default value is 1 for all platforms except P… |
| 1.3.6.1.4.1.429.4.2.1.48 | usrUserManHintAssigned | 1 | 1 | Is the hint assigned feature enabled? |
| 1.3.6.1.4.1.429.4.2.1.49 | usrUserManAuthorEna | 1 | 1 | Is remote authorization on or off |
| 1.3.6.1.4.1.429.4.2.1.50 | usrUserManTcpPacketsRx | 1 | 1 | The number of TCP packets received |
| 1.3.6.1.4.1.429.4.2.1.51 | usrUserManTcpPacketsTx | 1 | 1 | The number of TCP packets transmitted |
| 1.3.6.1.4.1.429.4.2.1.52 | usrUserManAAAServersTable | 1 | 26 | A table of AAA Servers configured. Several default servers are automatically entered. Adding a new entry requires the following o… |
| 1.3.6.1.4.1.429.4.2.1.53 | usrUserManDirectRequestStatus | 1 | 1 | Is direct request on or off. Not applicable to Wireless products. |
| 1.3.6.1.4.1.429.4.2.1.54 | usrUserManDirectRequestDelimiter | 1 | 1 | The delimiter string for the direct request service Not applicable to Wireless products. |
| 1.3.6.1.4.1.429.4.2.1.55 | usrUserManDirectRequestTimeout | 1 | 1 | Timeout feature for the direct request service Not applicable to Wireless products. |
| 1.3.6.1.4.1.429.4.2.1.56 | usrUserManRadiusVSA | 1 | 1 | Vendor Specific Attribute for the compatibility of Sprint CISCO Server. The default is enabled. |
| 1.3.6.1.4.1.429.4.2.1.57 | usrUserManRadiusAcctVSA | 1 | 1 | Vendor Specific Attribute for the compatibility of Sprint CISCO Server. The default is enabled. |
| 1.3.6.1.4.1.429.4.2.1.67 | usrUserManAAADomainTable | 1 | 11 | None |
| 1.3.6.1.4.1.429.4.2.1.68 | uumAAAGlobalSelectionMask | 1 | 1 | The Selection mask for Server selection Note: This MIB is not supported anymore, a new MIB has been created for this purpose |
| 1.3.6.1.4.1.429.4.2.1.69 | uumAAAGlobalServersUnavail | 1 | 1 | Behaviour if servers are unavailable. Action can be DENY, PERMIT or If it is a Domain Name it is an Alphanumeric string. It must … |
| 1.3.6.1.4.1.429.4.2.1.70 | uumAAAGlobalSearchAlg | 1 | 1 | Domain Server Search Algorithm |
| 1.3.6.1.4.1.429.4.2.1.73 | uumAAAGlobalMirroring | 1 | 1 | Should this Domain info. be mirrored ? |
| 1.3.6.1.4.1.429.4.2.1.90 | usrUserManReportedPortDensity | 1 | 1 | Used as slot multiplier for modem slot when reporting RADIUS NAS-PORT attribute. The reported NAS-PORT attribute for a call is co… |
| 1.3.6.1.4.1.429.4.2.1.91 | usrUserManFillNullAttributes | 1 | 1 | This is the switch to enable/disable Filling of Null Attributes in Radius Accounting records |
| 1.3.6.1.4.1.429.4.2.1.92 | usrUserManRadiusSrcPort | 1 | 1 | The source udp port the primary radius server binds to |
| 1.3.6.1.4.1.429.4.2.1.93 | usrUserManRadiusAcctSrcPort | 1 | 1 | The source radius port for the primary accounting server |
| 1.3.6.1.4.1.429.4.2.1.94 | usrUserManRadiusTertiaryIP | 1 | 1 | The tertiary IP address of the RADIUS server |
| 1.3.6.1.4.1.429.4.2.1.95 | usrUserManRadiusTertiarySecret | 1 | 1 | The radius secret for the tertiary server. Reading this object will return NULL. |
| 1.3.6.1.4.1.429.4.2.1.96 | usrUserManRadiusTertiaryPort | 1 | 1 | The udp port the tertiary radius server listens at |
| 1.3.6.1.4.1.429.4.2.1.97 | usrRadiusAuthAlgorithm | 1 | 1 | Takes either the Fall-through or Round-robin algorithm for re-tries |
| 1.3.6.1.4.1.429.4.2.1.98 | usrRadiusAttributeStyle | 1 | 1 | Takes STANDARD or ASCEND style for attribute values |
| 1.3.6.1.4.1.429.4.2.1.99 | usrRadiusInterimAccountingIntervalEnabled | 1 | 1 | Indicates whether checkpoint accounting is enabled |
| 1.3.6.1.4.1.429.4.2.1.100 | usrRadiusInterimAccountingInterval | 1 | 1 | The time intervals when acct. info is sent to the servers |
| 1.3.6.1.4.1.429.4.2.1.101 | usrUserManPrimAcctStatus | 1 | 1 | Is priamary accounting on or off |
| 1.3.6.1.4.1.429.4.2.1.102 | usrUserManSecAcctStatus | 1 | 1 | Is secondary accounting on or off |
| 1.3.6.1.4.1.429.4.2.1.103 | usrUserManRadiusAcctFirstBackupIP | 1 | 1 | The IP address of the Primary RADIUS First backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.104 | usrUserManRadiusAcctSecondBackupIP | 1 | 1 | The IP address of the Primary RADIUS Second backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.105 | usrUserManRadiusAcctAltFirstBackupIP | 1 | 1 | The IP address of the Secondary RADIUS First backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.106 | usrUserManRadiusAcctAltSecondBackupIP | 1 | 1 | The IP address of the Secondary RADIUS Second backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.107 | usrUserManRadiusAcctFirstBackupSecret | 1 | 1 | The radius secret for the primary first backup accounting server Reading this object will return NULL. |
| 1.3.6.1.4.1.429.4.2.1.108 | usrUserManRadiusAcctSecondBackupSecret | 1 | 1 | The radius secret for the primary second backup accounting server. Reading this object will return NULL. |
| 1.3.6.1.4.1.429.4.2.1.109 | usrUserManRadiusAcctAltFirstBackupSecret | 1 | 1 | The radius secret for the secondary first backup accounting server. Reading this object will return NULL. |
| 1.3.6.1.4.1.429.4.2.1.110 | usrUserManRadiusAcctAltSecondBackupSecret | 1 | 1 | The radius secret for the secondary second backup accounting server Reading this object will return NULL. |
| 1.3.6.1.4.1.429.4.2.1.111 | usrUserManRadiusAcctFirstBackupPort | 1 | 1 | The radius port for the primary first backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.112 | usrUserManRadiusAcctSecondBackupPort | 1 | 1 | The radius port for the primary second backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.113 | usrUserManRadiusAcctAltFirstBackupPort | 1 | 1 | The radius port for the secondary first backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.114 | usrUserManRadiusAcctAltSecondBackupPort | 1 | 1 | The radius port for the secondary second backup accounting server |
| 1.3.6.1.4.1.429.4.2.1.115 | usrUserManRadiusAcctRoundRobinCount | 1 | 1 | The number of times the servers are switched in the primary server group |
| 1.3.6.1.4.1.429.4.2.1.116 | usrUserManRadiusAcctAltRoundRobinCount | 1 | 1 | The number of times the servers are switched in the secondary server group |
| 1.3.6.1.4.1.429.4.2.1.117 | usrUserManRadiusAcctPacketDiscardCount | 1 | 1 | The number of packets discarded in the primary server group |
| 1.3.6.1.4.1.429.4.2.1.118 | usrUserManRadiusAcctAltPacketDiscardCount | 1 | 1 | The number of packets discarded in the secondary server group |
| 1.3.6.1.4.1.429.4.2.1.119 | usrUserManRadiusAcctQueuePercentFull | 1 | 1 | Percentage of the queue filled in the primary server group |
| 1.3.6.1.4.1.429.4.2.1.120 | usrUserManRadiusAcctAltQueuePercentFull | 1 | 1 | Percentage of the queue filled in the secondary server group |
| 1.3.6.1.4.1.429.4.2.1.121 | usrUserManRadiusAcctOutstandingPacketCount | 1 | 1 | The number of packets outstanding in the primary server group |
| ... | ||||