Vendor: 3Com
Module: A3Com-System-r4-MIB (a3Com-sys.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
a3ComBoot OBJECT IDENTIFIER ::= { a3ComSys 10 }
a3ComBoot OBJECT IDENTIFIER ::= { a3ComSys 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.13.10.1 | a3sysReBoot | 1 | 1 | This object can be used to reboot the system. If this object is set to stdReboot(2), the system's action is determined by the val… |
1.3.6.1.4.1.43.2.13.10.2 | a3sysTestBootTime | 1 | 1 | The Test Boot Time indicates the number of seconds after a test reboot the system will automatically reboot. Upon reboot, the sy… |
1.3.6.1.4.1.43.2.13.10.3 | a3sysStartUpAction | 1 | 1 | This parameter determines the boot source when the system is powered on or reset. If monitor (1) is chosen, the system enters mon… |
1.3.6.1.4.1.43.2.13.10.4 | a3sysTestRecoveryTimer | 1 | 1 | This object contains the real time value of the Test Recovery Timer. When the system is performing a 'test boot' (ie, a boot whe… |
1.3.6.1.4.1.43.2.13.10.5 | a3sysDirectedReBoots | 1 | 1 | This is a counter that tracks the number of times the system has completed successfully a boot, no matter how the boot was initia… |
1.3.6.1.4.1.43.2.13.10.6 | a3sysExceptionReBoots | 1 | 1 | This is a counter that tracks the number of times the system has crashed and a reboot sequence is begun by the exception handler.… |
1.3.6.1.4.1.43.2.13.10.7 | a3sysBootDump | 1 | 1 | This determines whether or not a memory dump is performed if the system fails due to a software problem. If noDump (1) is select… |
1.3.6.1.4.1.43.2.13.10.8 | a3sysBootSources | 1 | 1 | This parameter is used to specify how the entries in this table are used. If this object is set to primary(1), the system will use… |
1.3.6.1.4.1.43.2.13.10.9 | a3sysUserBootListTable | 1 | 28 | This table defines a list of boot sources (and for the NetBuilder Remote Office There are two other parameters that dictate how t… |
1.3.6.1.4.1.43.2.13.10.10 | a3sysIioBootTable | 1 | 6 | This table specifies where each IIO card obtains its boot image. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.13.1 | a3ComSysID | 4 | 8 | None |
1.3.6.1.4.1.43.2.13.2 | a3ComChip | 1 | 6 | None |
1.3.6.1.4.1.43.2.13.3 | a3ComMem | 1 | 7 | None |
1.3.6.1.4.1.43.2.13.4 | a3ComBrd | 2 | 10 | None |
1.3.6.1.4.1.43.2.13.5 | a3ComAudit | 2 | 4 | None |
1.3.6.1.4.1.43.2.13.6 | a3ComTime | 3 | 6 | None |
1.3.6.1.4.1.43.2.13.7 | a3ComAccCtl | 9 | 33 | None |
1.3.6.1.4.1.43.2.13.8 | a3ComSysMisc | 13 | 26 | None |
1.3.6.1.4.1.43.2.13.9 | a3ComFW | 3 | 6 | None |
1.3.6.1.4.1.43.2.13.11 | a3ComLastBoot | 9 | 18 | None |
1.3.6.1.4.1.43.2.13.12 | a3ComFileMgmt | 11 | 45 | None |
1.3.6.1.4.1.43.2.13.13 | a3ComRecovery | 1 | 5 | None |