This parameter defines whether the SDLC port is
capable of operating in either a point-to-point
or multipoint topology.
sdlcPortAdminTopology == multipoint implies the
port can also operate in a point-to-point
topology. sdlcPortAdminTopology ==
pointToPoint does not imply the port can
operate in a multipoint topology.
A write operation to this administrative value
shall not take effect until the SDLC port has
been cycled inactive.
Parsed from file 3Com-sdlc.mib.txt
Company: None
Module: A3Com-Sdlc-r1-MIB
This parameter defines whether the SDLC port is
capable of operating in either a point-to-point
or multipoint topology.
sdlcPortAdminTopology == multipoint implies the
port can also operate in a point-to-point
topology. sdlcPortAdminTopology ==
pointToPoint does not imply the port can
operate in a multipoint topology.
A write operation to this administrative value
shall not take effect until the SDLC port has
been cycled inactive.
Parsed from file A3Com-Sdlc-r1-MIB.mib
Module: A3Com-Sdlc-r1-MIB
Vendor: 3Com
Module: A3Com-Sdlc-r1-MIB (3Com-sdlc.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
sdlcPortAdminTopology OBJECT-TYPE SYNTAX INTEGER { pointToPoint(1), multipoint(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines whether the SDLC port is capable of operating in either a point-to-point or multipoint topology. sdlcPortAdminTopology == multipoint implies the port can also operate in a point-to-point topology. sdlcPortAdminTopology == pointToPoint does not imply the port can operate in a multipoint topology. A write operation to this administrative value shall not take effect until the SDLC port has been cycled inactive." DEFVAL { pointToPoint } ::= { sdlcPortAdminEntry 4 }
sdlcPortAdminTopology OBJECT-TYPE SYNTAX INTEGER { pointToPoint(1), multipoint(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines whether the SDLC port is capable of operating in either a point-to-point or multipoint topology. sdlcPortAdminTopology == multipoint implies the port can also operate in a point-to-point topology. sdlcPortAdminTopology == pointToPoint does not imply the port can operate in a multipoint topology. A write operation to this administrative value shall not take effect until the SDLC port has been cycled inactive." DEFVAL { pointToPoint } ::= { sdlcPortAdminEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.25.1.1.1.1 | sdlcPortAdminName | 0 | 0 | An octet string that defines the physical port to which this interface is assigned. It has implementation-specific significance.… |
| 1.3.6.1.4.1.43.2.25.1.1.1.2 | sdlcPortAdminRole | 0 | 0 | This object describes the role that the link station shall assume the next time a connection is established. Even though this is d… |
| 1.3.6.1.4.1.43.2.25.1.1.1.3 | sdlcPortAdminType | 0 | 0 | This parameter defines whether the SDLC port is to connect to a leased or switched line. A write operation to this administrativ… |
| 1.3.6.1.4.1.43.2.25.1.1.1.5 | sdlcPortAdminACTIVTO | 0 | 0 | This parameter defines the period of time (in 1/100ths of a second) that the port will allow a switched line to remain inactive b… |
| 1.3.6.1.4.1.43.2.25.1.1.1.6 | sdlcPortAdminPAUSE | 0 | 0 | This object defines the minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary … |
| 1.3.6.1.4.1.43.2.25.1.1.1.7 | sdlcPortAdminSlowPollTimer | 0 | 0 | This object describes the elapsed time (in 1/100ths of a second) between polls for failed secondary link station addresses. Depe… |