This object defines the minimum elapsed time
(in 1/100ths of a second) between any two
traversals of the poll list for a primary SDLC
port. Depending on the implementation, a write
operation to this administered value may not
take effect until the port is cycled inactive.
The object descriptor contains the name of an
NCP configuration parameter, PAUSE. Please
note that the value of this object represents
1/100ths of a second while the NCP PAUSE is
represented in 1/10ths of a second.
This object only has meaning for SDLC ports
where sdlcPortAdminRole == primary
Parsed from file 3Com-sdlc.mib.txt
Company: None
Module: A3Com-Sdlc-r1-MIB
This object defines the minimum elapsed time
(in 1/100ths of a second) between any two
traversals of the poll list for a primary SDLC
port. Depending on the implementation, a write
operation to this administered value may not
take effect until the port is cycled inactive.
The object descriptor contains the name of an
NCP configuration parameter, PAUSE. Please
note that the value of this object represents
1/100ths of a second while the NCP PAUSE is
represented in 1/10ths of a second.
This object only has meaning for SDLC ports
where sdlcPortAdminRole == primary
Parsed from file A3Com-Sdlc-r1-MIB.mib
Module: A3Com-Sdlc-r1-MIB
Vendor: 3Com
Module: A3Com-Sdlc-r1-MIB (3Com-sdlc.mib)
Type: TABULAR
Access: read-write
Syntax: TimeTicks
Automatically extracted from www.mibdepot.com
sdlcPortAdminPAUSE OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary SDLC port. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive. The object descriptor contains the name of an NCP configuration parameter, PAUSE. Please note that the value of this object represents 1/100ths of a second while the NCP PAUSE is represented in 1/10ths of a second. This object only has meaning for SDLC ports where sdlcPortAdminRole == primary " DEFVAL { 200 } ::= { sdlcPortAdminEntry 6 }
sdlcPortAdminPAUSE OBJECT-TYPE SYNTAX TimeTicks ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for a primary SDLC port. Depending on the implementation, a write operation to this administered value may not take effect until the port is cycled inactive. The object descriptor contains the name of an NCP configuration parameter, PAUSE. Please note that the value of this object represents 1/100ths of a second while the NCP PAUSE is represented in 1/10ths of a second. This object only has meaning for SDLC ports where sdlcPortAdminRole == primary " DEFVAL { 200 } ::= { sdlcPortAdminEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.25.1.1.1.1 | sdlcPortAdminName | 0 | 0 | An octet string that defines the physical port to which this interface is assigned. It has implementation-specific significance.… |
1.3.6.1.4.1.43.2.25.1.1.1.2 | sdlcPortAdminRole | 0 | 0 | This object describes the role that the link station shall assume the next time a connection is established. Even though this is d… |
1.3.6.1.4.1.43.2.25.1.1.1.3 | sdlcPortAdminType | 0 | 0 | This parameter defines whether the SDLC port is to connect to a leased or switched line. A write operation to this administrativ… |
1.3.6.1.4.1.43.2.25.1.1.1.4 | sdlcPortAdminTopology | 0 | 0 | This parameter defines whether the SDLC port is capable of operating in either a point-to-point or multipoint topology. sdlcPortAd… |
1.3.6.1.4.1.43.2.25.1.1.1.5 | sdlcPortAdminACTIVTO | 0 | 0 | This parameter defines the period of time (in 1/100ths of a second) that the port will allow a switched line to remain inactive b… |
1.3.6.1.4.1.43.2.25.1.1.1.7 | sdlcPortAdminSlowPollTimer | 0 | 0 | This object describes the elapsed time (in 1/100ths of a second) between polls for failed secondary link station addresses. Depe… |