If this object is set to enabled(1), then IPX routing
is enabled. If this object is set to disabled(2),
then IPX routing is disabled. Note, if this is disabled(2),
then RIP is disabled as well (for all Ports).
If this is set to disabled(2), then all dynamic routing
entries will be removed. All entries in the server
table will be removed as well.
NOTE: for NETBuilders running sw version 8.0 and greater,
this object is no longer supported. a3ipxControlTable
has replaced its functionality.
Parsed from file a3Com-ipx.mib.txt
Company: None
Module: A3Com-IPX-MIB
If this object is set to enabled(1), then IPX routing
is enabled. If this object is set to disabled(2),
then IPX routing is disabled. Note, if this is disabled(2),
then RIP is disabled as well (for all Ports).
If this is set to disabled(2), then all dynamic routing
entries will be removed. All entries in the server
table will be removed as well.
NOTE: for NETBuilders running sw version 8.0 and greater,
this object is no longer supported. a3ipxControlTable
has replaced its functionality.
Parsed from file A3Com-IPX-r5-MIB.mib
Module: A3Com-IPX-r5-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
a3ipxRouteControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS deprecated DESCRIPTION "If this object is set to enabled(1), then IPX routing is enabled. If this object is set to disabled(2), then IPX routing is disabled. Note, if this is disabled(2), then RIP is disabled as well (for all Ports). If this is set to disabled(2), then all dynamic routing entries will be removed. All entries in the server table will be removed as well. NOTE: for NETBuilders running sw version 8.0 and greater, this object is no longer supported. a3ipxControlTable has replaced its functionality." DEFVAL { disabled } ::= { a3ipxGeneral 1 }
a3ipxRouteControl OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS deprecated DESCRIPTION "If this object is set to enabled(1), then IPX routing is enabled. If this object is set to disabled(2), then IPX routing is disabled. Note, if this is disabled(2), then RIP is disabled as well (for all Ports). If this is set to disabled(2), then all dynamic routing entries will be removed. All entries in the server table will be removed as well. NOTE: for NETBuilders running sw version 8.0 and greater, this object is no longer supported. a3ipxControlTable has replaced its functionality." DEFVAL { disabled } ::= { a3ipxGeneral 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.7.1.1.0 | a3ipxRouteControl | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.7.1.2 | a3ipxWanBcastControl | 1 | 1 | If this object is enabled(1), then the IPX router makes copies of all received WAN broadcast packets and forwards them to all por… |
| 1.3.6.1.4.1.43.2.7.1.3 | a3ipxUpdateTime | 1 | 1 | This parameter specifies how often the router sends both RIP and SAP regular updates to exhange routing and service information. … |
| 1.3.6.1.4.1.43.2.7.1.4 | a3ipxFlushRipSap | 1 | 1 | This object is used to remove dynamic routing and or sap entries quickly and efficiently. Setting this object to rip (2) causes … |
| 1.3.6.1.4.1.43.2.7.1.5 | a3ipxInternalNet | 1 | 1 | This object represents the router's internal network number. This is used during IPX WAN negotiation and is the basis on which t… |
| 1.3.6.1.4.1.43.2.7.1.6 | a3ipxRouterName | 1 | 1 | This object specifies the router's symbolic name and is used during IPX WAN negotiations to build RIP/SAP Information Request/Res… |
| 1.3.6.1.4.1.43.2.7.1.7 | a3ipxControl | 1 | 7 | None |
| 1.3.6.1.4.1.43.2.7.1.8 | a3ipxRipHoldTimeFactor | 1 | 1 | This parameter specifies a factor that RIP uses to generate a hold time. A holdtime is generated by HoldTimeFactor * UpdateTime. … |
| 1.3.6.1.4.1.43.2.7.1.9 | a3ipxSapHoldTimeFactor | 1 | 1 | This parameter specifies a factor that SAP uses to generate a hold time. A holdtime is generated by HoldTimeFactor * UpdateTime. … |