This object is used to remove dynamic routing and
or sap entries quickly and efficiently. Setting this
object to rip (2) causes all dynamically entered routes
to be removed from a3ipxRouteTable.
If this object is set to sap (3), all dynamicaly learned
sap entries will be removed from a3ipxServerTable.
If this object is set to both (4), all dynamic entries
will be removed from both the routing table (a3ipxRouteTable)
and the sap table (a3ipxServerTable).
If a GET REQUEST is received for this object, other (1)
will be returned. Setting this object to other (1) will have
no effect on any routing or sap entries.
Parsed from file a3Com-ipx.mib.txt
Company: None
Module: A3Com-IPX-MIB
This object is used to remove dynamic routing and
or sap entries quickly and efficiently. Setting this
object to rip (2) causes all dynamically entered routes
to be removed from a3ipxRouteTable.
If this object is set to sap (3), all dynamicaly learned
sap entries will be removed from a3ipxServerTable.
If this object is set to both (4), all dynamic entries
will be removed from both the routing table (a3ipxRouteTable)
and the sap table (a3ipxServerTable).
If a GET REQUEST is received for this object, other (1)
will be returned. Setting this object to other (1) will have
no effect on any routing or sap entries.
Parsed from file A3Com-IPX-r5-MIB.mib
Module: A3Com-IPX-r5-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
a3ipxFlushRipSap OBJECT-TYPE SYNTAX INTEGER { other (1), rip (2), sap (3), both (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to remove dynamic routing and or sap entries quickly and efficiently. Setting this object to rip (2) causes all dynamically entered routes to be removed from a3ipxRouteTable. If this object is set to sap (3), all dynamicaly learned sap entries will be removed from a3ipxServerTable. If this object is set to both (4), all dynamic entries will be removed from both the routing table (a3ipxRouteTable) and the sap table (a3ipxServerTable). If a GET REQUEST is received for this object, other (1) will be returned. Setting this object to other (1) will have no effect on any routing or sap entries." ::= { a3ipxGeneral 4 }
a3ipxFlushRipSap OBJECT-TYPE SYNTAX INTEGER { other (1), rip (2), sap (3), both (4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to remove dynamic routing and or sap entries quickly and efficiently. Setting this object to rip (2) causes all dynamically entered routes to be removed from a3ipxRouteTable. If this object is set to sap (3), all dynamicaly learned sap entries will be removed from a3ipxServerTable. If this object is set to both (4), all dynamic entries will be removed from both the routing table (a3ipxRouteTable) and the sap table (a3ipxServerTable). If a GET REQUEST is received for this object, other (1) will be returned. Setting this object to other (1) will have no effect on any routing or sap entries." ::= { a3ipxGeneral 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.7.1.4.0 | a3ipxFlushRipSap | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.2.7.1.1 | a3ipxRouteControl | 1 | 1 | If this object is set to enabled(1), then IPX routing is enabled. If this object is set to disabled(2), then IPX routing is disa… |
| 1.3.6.1.4.1.43.2.7.1.2 | a3ipxWanBcastControl | 1 | 1 | If this object is enabled(1), then the IPX router makes copies of all received WAN broadcast packets and forwards them to all por… |
| 1.3.6.1.4.1.43.2.7.1.3 | a3ipxUpdateTime | 1 | 1 | This parameter specifies how often the router sends both RIP and SAP regular updates to exhange routing and service information. … |
| 1.3.6.1.4.1.43.2.7.1.5 | a3ipxInternalNet | 1 | 1 | This object represents the router's internal network number. This is used during IPX WAN negotiation and is the basis on which t… |
| 1.3.6.1.4.1.43.2.7.1.6 | a3ipxRouterName | 1 | 1 | This object specifies the router's symbolic name and is used during IPX WAN negotiations to build RIP/SAP Information Request/Res… |
| 1.3.6.1.4.1.43.2.7.1.7 | a3ipxControl | 1 | 7 | None |
| 1.3.6.1.4.1.43.2.7.1.8 | a3ipxRipHoldTimeFactor | 1 | 1 | This parameter specifies a factor that RIP uses to generate a hold time. A holdtime is generated by HoldTimeFactor * UpdateTime. … |
| 1.3.6.1.4.1.43.2.7.1.9 | a3ipxSapHoldTimeFactor | 1 | 1 | This parameter specifies a factor that SAP uses to generate a hold time. A holdtime is generated by HoldTimeFactor * UpdateTime. … |