This object determines whether bridging is performed
by this system. If this is set to noBridging (2),
all functions associated with bridging are disabled,
including Spanning Tree, Learning, and Source Routing.
Parsed from file 3Com-bridge-r3.mib.txt
Company: None
Module: A3Com-Bridge-r3-MIB
This object determines whether bridging is performed
by this system. If this is set to noBridging (2),
all functions associated with bridging are disabled,
including Spanning Tree, Learning, and Source Routing.
Parsed from file A3Com-Bridge-r3-MIB.mib
Module: A3Com-Bridge-r3-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
a3ComBrgCtl OBJECT-TYPE SYNTAX INTEGER { bridging (1), noBridging (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines whether bridging is performed by this system. If this is set to noBridging (2), all functions associated with bridging are disabled, including Spanning Tree, Learning, and Source Routing." REFERENCE "NETBuilder Ref. Guide, Bridge Service parameter: Control" DEFVAL { noBridging } ::= { a3ComBrgGen 1 }
a3ComBrgCtl OBJECT-TYPE SYNTAX INTEGER { bridging (1), noBridging (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object determines whether bridging is performed by this system. If this is set to noBridging (2), all functions associated with bridging are disabled, including Spanning Tree, Learning, and Source Routing." REFERENCE "NETBuilder Ref. Guide, Bridge Service parameter: Control" DEFVAL { noBridging } ::= { a3ComBrgGen 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.9.1.1.0 | a3ComBrgCtl | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.2.9.1.2 | a3ComBrgAgeCtl | 1 | 1 | This object determines whether nodes that have not transmitted packets for a specified amount of time are deleted from the forwar… |
1.3.6.1.4.1.43.2.9.1.3 | a3ComBrgFwallCtl | 1 | 1 | This object is important when the system is performing both bridging and routing. When this is set to firewall (1), the bridge d… |
1.3.6.1.4.1.43.2.9.1.4 | a3ComBrgLearnCtl | 1 | 1 | This object determines whether the bridge creates and updates entries in its forwarding tables. |
1.3.6.1.4.1.43.2.9.1.5 | a3ComBrgForwardCtl | 1 | 1 | This object determines whether the bridge forwards packets. This has no effect on other bridging related functions, such as Span… |
1.3.6.1.4.1.43.2.9.1.6 | a3ComBrgAppleCtl | 1 | 1 | This object enables the bridge to forward AppleTalk packets between Ethernet, FDDI, and token ring networks. The AppleTalk packe… |
1.3.6.1.4.1.43.2.9.1.7 | a3ComBrgFwTblCtl | 1 | 1 | This object is used to trigger actions taken on the static forwarding table. When this object is set to dynToStatic (2), all dyn… |
1.3.6.1.4.1.43.2.9.1.8 | a3ComBrgFwTblSize | 1 | 1 | This object returns the size of the bridge forwarding table in units of 2^(9+n) where n is the value of this object. Thus, if th… |
1.3.6.1.4.1.43.2.9.1.9 | a3ComBrgBLimitTimer | 1 | 1 | This object is used to select the broadcast limit feature sample interval. That is, this object contains the value of the time i… |
1.3.6.1.4.1.43.2.9.1.10 | a3ComBrgStExtTable | 1 | 4 | This table is an extension of the dot1dStaticTable from the Bridge MIB, rfc1286. One additional column has been defined to ident… |
1.3.6.1.4.1.43.2.9.1.11 | a3ComBrgFdbExtTable | 1 | 3 | This table is an extension of the dot1dTpFdbTable from the Bridge MIB, rfc1286. One additional column has been defined to identi… |
1.3.6.1.4.1.43.2.9.1.12 | a3ComBrgPortTable | 1 | 12 | This table is an extension of the dot1dBasePortTable from the Bridge MIB defined in RFC1286. This table contains generic informa… |
1.3.6.1.4.1.43.2.9.1.13 | a3ComBrgX25NbrTable | 1 | 4 | This table specifies the DTE address of each X25 neighbor that supports transparent bridging. The bridge will forward to the neig… |