Reference record for OID 1.3.6.1.4.1.43.2.9.1.6


parent
1.3.6.1.4.1.43.2.9.1 (a3ComBrgGen)
node code
6
node name
a3ComBrgAppleCtl
dot oid
1.3.6.1.4.1.43.2.9.1.6
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) brouterMIB(2) a3ComBridge(9) a3ComBrgGen(1) a3ComBrgAppleCtl(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) brouterMIB(2) a3ComBridge(9) a3ComBrgGen(1) a3ComBrgAppleCtl(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) brouterMIB(2) a3ComBridge(9) a3ComBrgGen(1) a3ComBrgAppleCtl(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) brouterMIB(2) a3ComBridge(9) a3ComBrgGen(1) a3ComBrgAppleCtl(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) a3Com(43) brouterMIB(2) a3ComBridge(9) a3ComBrgGen(1) a3ComBrgAppleCtl(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) a3Com(43) brouterMIB(2) a3ComBridge(9) a3ComBrgGen(1) a3ComBrgAppleCtl(6)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/a3Com/brouterMIB/a3ComBridge/a3ComBrgGen/a3ComBrgAppleCtl
  • /iso/identified-organization/dod/internet/private/enterprises/a3Com/brouterMIB/a3ComBridge/a3ComBrgGen/a3ComBrgAppleCtl
  • /iso/org/dod/internet/private/enterprise/a3Com/brouterMIB/a3ComBridge/a3ComBrgGen/a3ComBrgAppleCtl
  • /iso/org/dod/internet/private/enterprises/a3Com/brouterMIB/a3ComBridge/a3ComBrgGen/a3ComBrgAppleCtl
  • /iso/iso-identified-organization/dod/internet/private/enterprise/a3Com/brouterMIB/a3ComBridge/a3ComBrgGen/a3ComBrgAppleCtl
  • /iso/iso-identified-organization/dod/internet/private/enterprises/a3Com/brouterMIB/a3ComBridge/a3ComBrgGen/a3ComBrgAppleCtl
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/43/2/9/1/6

    Description by mibdepot

    This object enables the bridge to forward
    AppleTalk packets between Ethernet, FDDI, and
    token ring networks. The AppleTalk packets
    require encapsulation over FDDI networks.
    If AppleTalk packets are to be translated
    the same way as other Ethernet packets are
    translated, this parameter must be disabled (2).

    If this object is enabled, the original format
    of both AT-1 (Ethernet) and AT-2 (SNAP) packets
    are preserved when bridging between Ethernets
    over an FDDI backbone. If this is disabled,
    AT-2 packets are converted to Ethernet format
    before going across the FDDI backbone.

    Parsed from file 3Com-bridge-r3.mib.txt
    Company: None
    Module: A3Com-Bridge-r3-MIB

    Description by circitor

    This object enables the bridge to forward
    AppleTalk packets between Ethernet, FDDI, and
    token ring networks. The AppleTalk packets
    require encapsulation over FDDI networks.
    If AppleTalk packets are to be translated
    the same way as other Ethernet packets are
    translated, this parameter must be disabled (2).

    If this object is enabled, the original format
    of both AT-1 (Ethernet) and AT-2 (SNAP) packets
    are preserved when bridging between Ethernets
    over an FDDI backbone. If this is disabled,
    AT-2 packets are converted to Ethernet format
    before going across the FDDI backbone.

    Parsed from file A3Com-Bridge-r3-MIB.mib
    Module: A3Com-Bridge-r3-MIB

    Information by oid_info

    Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

    Information by mibdepot

    a3ComBrgAppleCtl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables the bridge to forward AppleTalk packets between Ethernet, FDDI, and token ring networks. The AppleTalk packets require encapsulation over FDDI networks. If AppleTalk packets are to be translated the same way as other Ethernet packets are translated, this parameter must be disabled (2). If this object is enabled, the original format of both AT-1 (Ethernet) and AT-2 (SNAP) packets are preserved when bridging between Ethernets over an FDDI backbone. If this is disabled, AT-2 packets are converted to Ethernet format before going across the FDDI backbone." REFERENCE "NETBuilder Ref. Guide, Bridge Service parameter: AppleTalk" DEFVAL { enable } ::= { a3ComBrgGen 6 }

    Information by circitor

    a3ComBrgAppleCtl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object enables the bridge to forward AppleTalk packets between Ethernet, FDDI, and token ring networks. The AppleTalk packets require encapsulation over FDDI networks. If AppleTalk packets are to be translated the same way as other Ethernet packets are translated, this parameter must be disabled (2). If this object is enabled, the original format of both AT-1 (Ethernet) and AT-2 (SNAP) packets are preserved when bridging between Ethernets over an FDDI backbone. If this is disabled, AT-2 packets are converted to Ethernet format before going across the FDDI backbone." REFERENCE "NETBuilder Ref. Guide, Bridge Service parameter: AppleTalk" DEFVAL { enable } ::= { a3ComBrgGen 6 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.43)

    Jeremy Siegel

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.43.2.9.1.6.0 a3ComBrgAppleCtl 0 0 None

    Brothers (12)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.43.2.9.1.1 a3ComBrgCtl 1 1 This object determines whether bridging is performed
    by this system. If this is set to noBridging (2),
    all functions associated …
    1.3.6.1.4.1.43.2.9.1.2 a3ComBrgAgeCtl 1 1 This object determines whether nodes that have not
    transmitted packets for a specified amount of time
    are deleted from the forwar…
    1.3.6.1.4.1.43.2.9.1.3 a3ComBrgFwallCtl 1 1 This object is important when the system is performing
    both bridging and routing. When this is set to
    firewall (1), the bridge d…
    1.3.6.1.4.1.43.2.9.1.4 a3ComBrgLearnCtl 1 1 This object determines whether the bridge creates
    and updates entries in its forwarding tables.
    1.3.6.1.4.1.43.2.9.1.5 a3ComBrgForwardCtl 1 1 This object determines whether the bridge forwards
    packets. This has no effect on other bridging
    related functions, such as Span…
    1.3.6.1.4.1.43.2.9.1.7 a3ComBrgFwTblCtl 1 1 This object is used to trigger actions taken on the
    static forwarding table. When this object is set to
    dynToStatic (2), all dyn…
    1.3.6.1.4.1.43.2.9.1.8 a3ComBrgFwTblSize 1 1 This object returns the size of the bridge
    forwarding table in units of 2^(9+n) where
    n is the value of this object. Thus, if th…
    1.3.6.1.4.1.43.2.9.1.9 a3ComBrgBLimitTimer 1 1 This object is used to select the broadcast limit
    feature sample interval. That is, this object
    contains the value of the time i…
    1.3.6.1.4.1.43.2.9.1.10 a3ComBrgStExtTable 1 4 This table is an extension of the dot1dStaticTable
    from the Bridge MIB, rfc1286. One additional
    column has been defined to ident…
    1.3.6.1.4.1.43.2.9.1.11 a3ComBrgFdbExtTable 1 3 This table is an extension of the dot1dTpFdbTable
    from the Bridge MIB, rfc1286. One additional
    column has been defined to identi…
    1.3.6.1.4.1.43.2.9.1.12 a3ComBrgPortTable 1 12 This table is an extension of the dot1dBasePortTable
    from the Bridge MIB defined in RFC1286. This table
    contains generic informa…
    1.3.6.1.4.1.43.2.9.1.13 a3ComBrgX25NbrTable 1 4 This table specifies the DTE address of each
    X25 neighbor that supports transparent bridging.
    The bridge will forward to the neig…