This defines the method used to interpret the a3ComPollAddress,
which implies on the protocol to be used.
Writing an address to the a3ComPollAddress object causes a default
a3ComPollAddressType value to be setup. The default value is
derived from the format of the address - four octets means ip(2),
four sets of numeric values separated by dot means ipdotted(3), eight
and twelve octets separated by colon means ipx(5), and two sets of
numeric values separated by a dot means appletalk(6). If the address
type cannot be figured out, and this object is not currently set to
ipname(4), it will then be set to unknown(1). In other words, this
object will remain unchanged if its current value is ipname(4) and
a more specific type cannot be given to it. Thus, for the mot part,
when setting this object manually, that needs to be done after
setting a3ComPollAddress.
For ip hostname(4), this field must be set manually. Furthermore,
DNS client must be locally enabled to allow for conversion from name
to ip address.
If the requested protocol is not supported or is not compatible
with the a3ComPollAddress, an error is returned when an attempt is
made to set a3ComPollAction to activate(2), and a3ComPollReport will
be set to noResource(4).
This object may not be modified if the associated a3ComPollReport
is equal to busy(2). When this object is successfully set,
a3ComPollReport will be set to idle(1).
Parsed from file 3cPoll.mib.txt
Company: None
Module: A3COM-SWITCHING-SYSTEMS-POLL-MIB
This defines the method used to interpret the a3ComPollAddress,
which implies on the protocol to be used.
Writing an address to the a3ComPollAddress object causes a default
a3ComPollAddressType value to be setup. The default value is
derived from the format of the address - four octets means ip(2),
four sets of numeric values separated by dot means ipdotted(3), eight
and twelve octets separated by colon means ipx(5), and two sets of
numeric values separated by a dot means appletalk(6). If the address
type cannot be figured out, and this object is not currently set to
ipname(4), it will then be set to unknown(1). In other words, this
object will remain unchanged if its current value is ipname(4) and
a more specific type cannot be given to it. Thus, for the mot part,
when setting this object manually, that needs to be done after
setting a3ComPollAddress.
For ip hostname(4), this field must be set manually. Furthermore,
DNS client must be locally enabled to allow for conversion from name
to ip address.
If the requested protocol is not supported or is not compatible
with the a3ComPollAddress, an error is returned when an attempt is
made to set a3ComPollAction to activate(2), and a3ComPollReport will
be set to noResource(4).
This object may not be modified if the associated a3ComPollReport
is equal to busy(2). When this object is successfully set,
a3ComPollReport will be set to idle(1).
Parsed from file A3COM-SWITCHING-SYSTEMS-POLL-MIB.mib
Module: A3COM-SWITCHING-SYSTEMS-POLL-MIB
Vendor: 3Com
Module: A3COM-SWITCHING-SYSTEMS-POLL-MIB
[Automatically extracted from oidview.com]
a3ComPollAddressType OBJECT-TYPE SYNTAX INTEGER { unknown(1), ip(2), ipdotted(3), ipname(4), ipx(5), appletalk(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This defines the method used to interpret the a3ComPollAddress, which implies on the protocol to be used. Writing an address to the a3ComPollAddress object causes a default a3ComPollAddressType value to be setup. The default value is derived from the format of the address - four octets means ip(2), four sets of numeric values separated by dot means ipdotted(3), eight and twelve octets separated by colon means ipx(5), and two sets of numeric values separated by a dot means appletalk(6). If the address type cannot be figured out, and this object is not currently set to ipname(4), it will then be set to unknown(1). In other words, this object will remain unchanged if its current value is ipname(4) and a more specific type cannot be given to it. Thus, for the mot part, when setting this object manually, that needs to be done after setting a3ComPollAddress. For ip hostname(4), this field must be set manually. Furthermore, DNS client must be locally enabled to allow for conversion from name to ip address. If the requested protocol is not supported or is not compatible with the a3ComPollAddress, an error is returned when an attempt is made to set a3ComPollAction to activate(2), and a3ComPollReport will be set to noResource(4). This object may not be modified if the associated a3ComPollReport is equal to busy(2). When this object is successfully set, a3ComPollReport will be set to idle(1)." DEFVAL { unknown } ::= { a3ComPollEntry 3 }
a3ComPollAddressType OBJECT-TYPE SYNTAX INTEGER { unknown(1), ip(2), ipdotted(3), ipname(4), ipx(5), appletalk(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This defines the method used to interpret the a3ComPollAddress, which implies on the protocol to be used. Writing an address to the a3ComPollAddress object causes a default a3ComPollAddressType value to be setup. The default value is derived from the format of the address - four octets means ip(2), four sets of numeric values separated by dot means ipdotted(3), eight and twelve octets separated by colon means ipx(5), and two sets of numeric values separated by a dot means appletalk(6). If the address type cannot be figured out, and this object is not currently set to ipname(4), it will then be set to unknown(1). In other words, this object will remain unchanged if its current value is ipname(4) and a more specific type cannot be given to it. Thus, for the mot part, when setting this object manually, that needs to be done after setting a3ComPollAddress. For ip hostname(4), this field must be set manually. Furthermore, DNS client must be locally enabled to allow for conversion from name to ip address. If the requested protocol is not supported or is not compatible with the a3ComPollAddress, an error is returned when an attempt is made to set a3ComPollAction to activate(2), and a3ComPollReport will be set to noResource(4). This object may not be modified if the associated a3ComPollReport is equal to busy(2). When this object is successfully set, a3ComPollReport will be set to idle(1)." DEFVAL { unknown } ::= { a3ComPollEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.43.29.4.22.1.1.1 | a3ComPollIndex | 0 | 0 | Unique identifier of a row in the Poll Table. The actual number of rows that can be created on any particular device depends on t… |
1.3.6.1.4.1.43.29.4.22.1.1.2 | a3ComPollAddress | 0 | 0 | This DisplayString is the network address of the device to monitor. Typically this is an IP, dotted IP format, IP's hostname, IPX… |
1.3.6.1.4.1.43.29.4.22.1.1.4 | a3ComPollCount | 0 | 0 | This integer is the number of ping packets to be sent out until completion of a polling command. If count is set to continuous(0… |
1.3.6.1.4.1.43.29.4.22.1.1.5 | a3ComPollAttempts | 0 | 0 | The number of unsuccessful or successful requests necessary before deciding that the device is definitely not responding or resp… |
1.3.6.1.4.1.43.29.4.22.1.1.6 | a3ComPollRate | 0 | 0 | This defines how often, in seconds, a poll packet is sent to the device being polled. If burst mode(0) is chosen, then number of… |
1.3.6.1.4.1.43.29.4.22.1.1.7 | a3ComPollResponseTimeOut | 0 | 0 | Maximum wait time, in msecs, for a response packet before deciding that no response arrived. This object differs from a3ComPollR… |
1.3.6.1.4.1.43.29.4.22.1.1.8 | a3ComPollPacketSize | 0 | 0 | Size, in bytes, of ping packet to be sent out. If set to 0, the default size for ping packet under the protocol chosen will be u… |
1.3.6.1.4.1.43.29.4.22.1.1.9 | a3ComPollSourceAddress | 0 | 0 | This DisplayString is the network address of the local interface to receive ping query. Typically this is an IP, IPX or AppleTal… |
1.3.6.1.4.1.43.29.4.22.1.1.10 | a3ComPollMinRoundTripTime | 0 | 0 | The minimum amount of time taken, in msecs, for the round trip of a ping packet. |
1.3.6.1.4.1.43.29.4.22.1.1.11 | a3ComPollAvgRoundTripTime | 0 | 0 | The average amount of time taken, in msecs, for the round trip of a ping packet. |
1.3.6.1.4.1.43.29.4.22.1.1.12 | a3ComPollMaxRoundTripTime | 0 | 0 | The maximum amount of time taken, in msecs, for the round trip of a ping packet. |
1.3.6.1.4.1.43.29.4.22.1.1.13 | a3ComPollFramesSent | 0 | 0 | The number of ping packets sent to remote device so far. |
1.3.6.1.4.1.43.29.4.22.1.1.14 | a3ComPollFramesReceived | 0 | 0 | The number of ping packets responded by remote device so far. If a3ComPollResponseTimeOut is a non-zero value, and the poll respo… |
1.3.6.1.4.1.43.29.4.22.1.1.15 | a3ComPollInformation | 0 | 0 | Depending on the protocol being used, this object contains extra information obtained through the device poll. For IP, the value… |
1.3.6.1.4.1.43.29.4.22.1.1.16 | a3ComPollOwner | 0 | 0 | The RMON OwnerString conventions are used here to help control the multi-manager situations. |
1.3.6.1.4.1.43.29.4.22.1.1.17 | a3ComPollReport | 0 | 0 | This integer contains the current status of the poll entry. When the state changes from busy to any other, the entry is no longe… |
1.3.6.1.4.1.43.29.4.22.1.1.18 | a3ComPollAction | 0 | 0 | This object is the trigger for initiating, stopping, resetting and destroying a poll entry. In order to read the current status … |