Returns the revision number of the switch main board
on which the system firmware resides.
Returns the revision number of the switch main board
on which the system firmware resides.
Parsed from file ESSWITCH-MIB.my.txt
Company: None
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
Returns the revision number of the switch main board
on which the system firmware resides.
Parsed from file STAND-ALONE-ETHERNET-SWITCH-MIB.mib
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
sysInfoBoardRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the revision number of the switch main board on which the system firmware resides." ::= { sysInfo 2 }
Vendor: Grand Junction Networks
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
[Automatically extracted from oidview.com]
sysInfoBoardRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the revision number of the switch main board on which the system firmware resides." ::= { sysInfo 2 }
sysInfoBoardRevision OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the revision number of the switch main board on which the system firmware resides." ::= { sysInfo 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.437.1.1.3.1.2.0 | sysInfoBoardRevision | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.437.1.1.3.1.1 | sysInfoFwdEngineRevision | 1 | 1 | Returns the revision number of the forwarding engine ASIC. |
1.3.6.1.4.1.437.1.1.3.1.3 | sysInfoTotalNumberOfPorts | 1 | 1 | The total number of physical network ports. fixed configuration - 27, 15 or 14 ports modular configuration - 25 - 41 ports T… |
1.3.6.1.4.1.437.1.1.3.1.4 | sysInfoNumberOfSwitchPorts | 1 | 1 | The number of ports that are individually switched. - 27, 15 or 14 switched ports. Each of these ports has hardware support for a… |
1.3.6.1.4.1.437.1.1.3.1.5 | sysInfoNumberOfSharedPorts | 1 | 1 | The number of ports that are collectively switched. fixed configuration - 0 ports modular configuration - 0 to 16 ports Hardwa… |
1.3.6.1.4.1.437.1.1.3.1.6 | sysInfoNumberOfInstalledModules | 1 | 1 | The number of high speed switched ports with installed and recognized modules. Hardware supported statistics are available for i… |
1.3.6.1.4.1.437.1.1.3.1.7 | sysInfoBuffersUsed | 1 | 1 | The high-water mark of frame buffer usage in this switch. The initial value upon system reset is zero. |
1.3.6.1.4.1.437.1.1.3.1.8 | sysInfoMaxBuffers | 1 | 1 | Number of times sysBuffersUsed has reached its maximum value and been reset to zero by the switch. The initial value is zero. |
1.3.6.1.4.1.437.1.1.3.1.9 | sysInfoUtilDisplay | 1 | 1 | The number of utilization meter LEDs currently lit on the front panel. |
1.3.6.1.4.1.437.1.1.3.1.10 | sysInfoAddrCapacity | 1 | 1 | The system-wide maximum number of addresses supported. This address capacity includes both dynamic and static address types. |
1.3.6.1.4.1.437.1.1.3.1.11 | sysInfoRestrictedStaticAddrCapacity | 1 | 1 | The system-wide maximum number of restricted static addresses supported. This object is a subset of sysInfoAddrCapacity. |
1.3.6.1.4.1.437.1.1.3.1.12 | sysInfoPOSTResult | 1 | 1 | A value which indicates the failures of some particular Power On Self Test (POST). The value is a sum. This sum initially takes … |
1.3.6.1.4.1.437.1.1.3.1.13 | sysInfoPortFailedPOSTMap | 1 | 1 | A bit array where the presence of a particular bit indicates a failure of a particular port, as determined by the POST 'individua… |
1.3.6.1.4.1.437.1.1.3.1.14 | sysInfoPortLinkDisplayMap | 1 | 1 | A bit array where the presence of a particular bit indicates a lit link LED for a port. Each octet within the value of this objec… |
1.3.6.1.4.1.437.1.1.3.1.15 | sysInfoPortDisabledDisplayMap | 1 | 1 | A bit array where the presence of a particular bit indicates a lit disabled LED for a port. Each octet within the value of this o… |
1.3.6.1.4.1.437.1.1.3.1.16 | sysInfoBroadcastStormLastTime | 1 | 1 | The last time a port exceeded broadcast threshold. This object is only valid if broadcast storm control is enabled at least once … |
1.3.6.1.4.1.437.1.1.3.1.17 | sysInfoPortExceedBroadcastStorm | 1 | 1 | The port where the broadcast threshold was last exceeded, if Broadcast Storm Control was enabled. The time when the event occurre… |
1.3.6.1.4.1.437.1.1.3.1.18 | sysInfoRedundantPowerState | 1 | 1 | Indicates the state of the redundant power supply. off : the switch is not connected to a redundant power source. healthy : … |
1.3.6.1.4.1.437.1.1.3.1.19 | sysInfoInternalPowerState | 1 | 1 | Indicates the state of the internal power supply. off : the internal power supply is off. on : the internal power supply is on. |
1.3.6.1.4.1.437.1.1.3.1.20 | sysInfoConfigFileStatus | 1 | 1 | The status of current or last succesful configuration download since the switch was initialized. The status contains the file nam… |
1.3.6.1.4.1.437.1.1.3.1.21 | sysInfoImageCapability | 1 | 1 | The software image capability supported. |