The default gateway IP address is the address of the next
hop router the switch uses to reach a non-local IP
host when the switch does not know the return route. During
a normal management protocol exchange with an IP client
host, the switch simply sends its response onto the same
route from which the request was received. The default
gateway route is only used when the switch itself
initiates an exchange, e.g., a TFTP upgrade, with the client.
The default gateway IP address is global to all VLANs,
which is unlike the unique per-VLAN management IP address
and subnet mask.
A write to this object will take effect immediately,
replacing the previous address, if any. The default is
0.0.0.0, or no address.
The default gateway IP address is the address of the next
hop router the switch uses to reach a non-local IP
host when the switch does not know the return route. During
a normal management protocol exchange with an IP client
host, the switch simply sends its response onto the same
route from which the request was received. The default
gateway route is only used when the switch itself
initiates an exchange, e.g., a TFTP upgrade, with the client.
The default gateway IP address is global to all VLANs,
which is unlike the unique per-VLAN management IP address
and subnet mask.
A write to this object will take effect immediately,
replacing the previous address, if any. The default is
0.0.0.0, or no address.
Parsed from file ESSWITCH-MIB.my.txt
Company: None
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
The default gateway IP address is the address of the next
hop router the switch uses to reach a non-local IP
host when the switch does not know the return route. During
a normal management protocol exchange with an IP client
host, the switch simply sends its response onto the same
route from which the request was received. The default
gateway route is only used when the switch itself
initiates an exchange, e.g., a TFTP upgrade, with the client.
The default gateway IP address is global to all VLANs,
which is unlike the unique per-VLAN management IP address
and subnet mask.
A write to this object will take effect immediately,
replacing the previous address, if any. The default is
0.0.0.0, or no address.
Parsed from file STAND-ALONE-ETHERNET-SWITCH-MIB.mib
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
netMgmtDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The default gateway IP address is the address of the next hop router the switch uses to reach a non-local IP host when the switch does not know the return route. During a normal management protocol exchange with an IP client host, the switch simply sends its response onto the same route from which the request was received. The default gateway route is only used when the switch itself initiates an exchange, e.g., a TFTP upgrade, with the client. The default gateway IP address is global to all VLANs, which is unlike the unique per-VLAN management IP address and subnet mask. A write to this object will take effect immediately, replacing the previous address, if any. The default is 0.0.0.0, or no address." ::= { netMgmt 3 }
Vendor: Grand Junction Networks
Module: STAND-ALONE-ETHERNET-SWITCH-MIB
[Automatically extracted from oidview.com]
netMgmtDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The default gateway IP address is the address of the next hop router the switch uses to reach a non-local IP host when the switch does not know the return route. During a normal management protocol exchange with an IP client host, the switch simply sends its response onto the same route from which the request was received. The default gateway route is only used when the switch itself initiates an exchange, e.g., a TFTP upgrade, with the client. The default gateway IP address is global to all VLANs, which is unlike the unique per-VLAN management IP address and subnet mask. A write to this object will take effect immediately, replacing the previous address, if any. The default is 0.0.0.0, or no address." ::= { netMgmt 3 }
netMgmtDefaultGateway OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The default gateway IP address is the address of the next hop router the switch uses to reach a non-local IP host when the switch does not know the return route. During a normal management protocol exchange with an IP client host, the switch simply sends its response onto the same route from which the request was received. The default gateway route is only used when the switch itself initiates an exchange, e.g., a TFTP upgrade, with the client. The default gateway IP address is global to all VLANs, which is unlike the unique per-VLAN management IP address and subnet mask. A write to this object will take effect immediately, replacing the previous address, if any. The default is 0.0.0.0, or no address." ::= { netMgmt 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.437.1.1.3.4.3.0 | netMgmtDefaultGateway | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.437.1.1.3.4.1 | netMgmtIpAddress | 1 | 1 | The switch's administrative IP address. The switch may automatically discover a value for this object using the BootStrap protoc… |
| 1.3.6.1.4.1.437.1.1.3.4.2 | netMgmtIpSubnetMask | 1 | 1 | The switch's administrative IP subnet mask. The switch may automatically discover a value for this object using the BootStrap pr… |
| 1.3.6.1.4.1.437.1.1.3.4.4 | netMgmtEnableAuthenTraps | 1 | 1 | Indicates whether the switch is permitted to generate authenticationFailure traps. The value of this object overrides any configur… |
| 1.3.6.1.4.1.437.1.1.3.4.5 | netMgmtEnableLinkTraps | 1 | 1 | Indicates whether the switch is permitted to generate linkUp/linkDown traps. The value of this object overrides any configuration… |
| 1.3.6.1.4.1.437.1.1.3.4.6 | netMgmtConsoleInactTime | 1 | 1 | The number of seconds of Management Console session inactivity to wait before ending the session. Once a session has ended, the … |
| 1.3.6.1.4.1.437.1.1.3.4.7 | netMgmtConsolePasswordThresh | 1 | 1 | The number of consecutive invalid password attempts allowed before the Management Console is shut down (kept silent) for a config… |
| 1.3.6.1.4.1.437.1.1.3.4.8 | netMgmtConsoleSilentTime | 1 | 1 | The number of minutes during which the Management Console will be unavailable after repeated failed attempts to logon. A zero va… |
| 1.3.6.1.4.1.437.1.1.3.4.9 | netMgmtModemInitString | 1 | 1 | This is the initialization string used to configure an attached modem. Specify this string if the modem is not Hayes compatible.… |
| 1.3.6.1.4.1.437.1.1.3.4.10 | netMgmtModemDialString | 1 | 1 | This string contains a phone number which is used to establish a modem connection with a remote site. Only the phone number need… |
| 1.3.6.1.4.1.437.1.1.3.4.11 | netMgmtModemDialDelay | 1 | 1 | This object specifies a delay in seconds between every dial-out failure. The value zero indicates an infinite delay. Normally, … |
| 1.3.6.1.4.1.437.1.1.3.4.12 | netMgmtModemAutoAnswer | 1 | 1 | This object specifies whether the system should be in auto-answer mode and only accepts incoming calls. Note that the system wil… |
| 1.3.6.1.4.1.437.1.1.3.4.13 | netMgmtSetClientTable | 1 | 5 | Table (4 entries) containing a list of IP addresses or DNS name of workstations permitted to issue SET requests. Such a workstat… |
| 1.3.6.1.4.1.437.1.1.3.4.14 | netMgmtTrapClientTable | 1 | 6 | Table (4 entries) containing a list of Network Management Stations that are to receive traps generated by this Network Management… |
| 1.3.6.1.4.1.437.1.1.3.4.15 | netMgmtCdpHoldTime | 1 | 1 | The hold time is the amount of time that a neighboring device keeps the CDP neighbor information received from this switch. If th… |
| 1.3.6.1.4.1.437.1.1.3.4.16 | netMgmtCdpTransmissionTime | 1 | 1 | The transmission time specifies the interval that the switch will trasnmit CDP messages from its ports. The default value is 60 s… |
| 1.3.6.1.4.1.437.1.1.3.4.17 | netMgmtCgmpEnable | 1 | 1 | This variable allows user to enable or disable Cisco Group Management Protocol (CGMP). Enabling CGMP will result in the deletion … |
| 1.3.6.1.4.1.437.1.1.3.4.18 | netMgmtCgmpRouterHoldTime | 1 | 1 | Multicast routers that support CGMP will send CGMP join message to advertise themselves to switches within a network. A switch th… |
| 1.3.6.1.4.1.437.1.1.3.4.19 | netMgmtVlan | 1 | 1 | The current VLAN for network management. This defaults to 1. |
| 1.3.6.1.4.1.437.1.1.3.4.20 | netMgmtEnableRIP | 1 | 1 | This object enables and disables Routing Information Protocol (RIP) listener to automatically discover IP gateways. The default v… |
| 1.3.6.1.4.1.437.1.1.3.4.21 | netMgmtDomainServer1IpAddress | 1 | 1 | The IP address of a Domain Name Server (DNS) which the system uses to resolve domain names to IP addresses. A set on this object … |
| 1.3.6.1.4.1.437.1.1.3.4.22 | netMgmtDomainServer2IpAddress | 1 | 1 | The IP address of a second Domain Name Server (DNS) which the system uses to resolve domain names to IP addresses. A set on this … |
| 1.3.6.1.4.1.437.1.1.3.4.23 | netMgmtDefaultSearchDomain | 1 | 1 | A string of up to 63 characters specifying a default domain search path. When switch needs to resolve a domain name that is not f… |
| 1.3.6.1.4.1.437.1.1.3.4.24 | netMgmtHttpServerAdminState | 1 | 1 | This variable enables or disables the HTTP server interface. The default value is enabled(1). |
| 1.3.6.1.4.1.437.1.1.3.4.25 | netMgmtHttpPort | 1 | 1 | This variable allows the user to configure a specific port on which the HTTP server will listen for TCP connections. By default, … |