Vendor: Codex
Module: CDX-6500-COMMON-MIB
[Automatically extracted from oidview.com]
cdx6500NMNPconfig OBJECT IDENTIFIER ::= { cdx6500NMNodeParametersGroup 1 }
cdx6500NMNPconfig OBJECT IDENTIFIER ::= { cdx6500NMNodeParametersGroup 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.1.2.1.1 | cdx6500NMNPCnodeName | 1 | 1 | This parameter identifies the node with a name, which appears at the top of control terminal menus and reports. Range is 0 to 8 a… |
1.3.6.1.4.1.449.2.1.1.2.1.2 | cdx6500NMNPCnodeNum | 1 | 1 | The node number identifies the node for X.25 routing purposes to prevent routing loops. |
1.3.6.1.4.1.449.2.1.1.2.1.3 | cdx6500NMNPCnodeAddress | 1 | 1 | The node address specifies the main part of the network address for calls destined within this node: PAD port or node resource (f… |
1.3.6.1.4.1.449.2.1.1.2.1.4 | cdx6500NMNPCchassis | 1 | 1 | This parameters identifies the type of chassis that this node is residing in. This is necessary in order to correctly interpret t… |
1.3.6.1.4.1.449.2.1.1.2.1.5 | cdx6500NMNPCdate | 1 | 1 | The node date used for date stamps of events and traps. The format of the string is yyyymmmdd, year: four digits, month: first th… |
1.3.6.1.4.1.449.2.1.1.2.1.6 | cdx6500NMNPCtime | 1 | 1 | The node time used for time stamps of events and traps. The format of the string is hhmmss, hour: 00..23, minute 00..59, second: … |
1.3.6.1.4.1.449.2.1.1.2.1.7 | cdx6500NMNPCportUtil | 1 | 1 | Port Utilization Threshold (%). This parameter sets the alarm level for traffic on every port in a node. The traffic is checked o… |
1.3.6.1.4.1.449.2.1.1.2.1.8 | cdx6500NMNPCbuffUtil | 1 | 1 | Buffer Utilization Threshold (%). This parameter sets the alarm level for data buffers. When data passes through a node, buffers … |
1.3.6.1.4.1.449.2.1.1.2.1.9 | cdx6500NMNPCcpuUtil | 1 | 1 | CPU Utilization Threshold (%). If the CPU is not processing data, it is running diagnostic checks. It is never idle. This paramet… |
1.3.6.1.4.1.449.2.1.1.2.1.10 | cdx6500NMNPCportErr | 1 | 1 | Port Error Threshold. This threshold specifies the number of port errors (such as parity or framing errors) that can be detected … |
1.3.6.1.4.1.449.2.1.1.2.1.11 | cdx6500NMNPCalarmTmr | 1 | 1 | Alarm Threshold Timer. This parameter prevents a node from sending threshold alarms too frequently. If a node generates an alarm … |
1.3.6.1.4.1.449.2.1.1.2.1.12 | cdx6500NMNPCmaxRoutHops | 1 | 1 | Maximum Routing Hops.This parameter specifies the maximum number of nodes a call may pass through before reaching its destination. |
1.3.6.1.4.1.449.2.1.1.2.1.13 | cdx6500NMNPCctpSubAddr | 1 | 1 | This parameter specifies the Control Port (CTP) Subaddress. Calls with network address composed of the node address and this suba… |
1.3.6.1.4.1.449.2.1.1.2.1.14 | cdx6500NMNPCctpIdleTime | 1 | 1 | Control Port Idle Disconnect Time (minutes). This specifies how many minutes of inactivity can occur before the control terminal … |
1.3.6.1.4.1.449.2.1.1.2.1.15 | cdx6500NMNPCalmDist | 1 | 1 | This object has been replaced by cdx6500NMNPCalmDistrib. |
1.3.6.1.4.1.449.2.1.1.2.1.16 | cdx6500NMNPCalmMmem | 1 | 1 | Alarm Printer Mnemonic. This specifies the mnemonic name for the destination of alarms sent by the node (if Alarm Distribution = … |
1.3.6.1.4.1.449.2.1.1.2.1.17 | cdx6500NMNPCalmSelect | 1 | 1 | This object has been replaced by cdx6500NMNPCalmSelection. |
1.3.6.1.4.1.449.2.1.1.2.1.18 | cdx6500NMNPCbroadPortSubad | 1 | 1 | This specifies the broadcast port subaddress for this node. Calls with network address composed of the node address and this suba… |
1.3.6.1.4.1.449.2.1.1.2.1.19 | cdx6500NMNPCnoBroadNets | 1 | 1 | Number of Broadcast Nets. This specifies the number of Broadcast Networks to which this node can send broadcast messages. A value… |
1.3.6.1.4.1.449.2.1.1.2.1.20 | cdx6500NMNPCnoBroadInCh | 1 | 1 | Number of Broadcast Input Channels. This specifies the number of simultaneous broadcast messages that can be received. |
1.3.6.1.4.1.449.2.1.1.2.1.21 | cdx6500NMNPCbillMnem | 1 | 1 | When billing records need to be printed, the node will use this mnemonic to call and send the records to this destination. This … |
1.3.6.1.4.1.449.2.1.1.2.1.22 | cdx6500NMNPCbillThresh | 1 | 1 | When the number of billing records queued up equals this threshold, a call will be placed to the logging device to dump the billi… |
1.3.6.1.4.1.449.2.1.1.2.1.23 | cdx6500NMNPCmaxBill | 1 | 1 | This is the maximum number of billing records the node will be allowed to store to be printed. Billing records created after this… |
1.3.6.1.4.1.449.2.1.1.2.1.24 | cdx6500NMNPCbillTimer | 1 | 1 | If billing records have been stored for printing for this amount of time (in minutes) without reaching the threshold, a call will… |
1.3.6.1.4.1.449.2.1.1.2.1.25 | cdx6500NMNPCpvcBill | 1 | 1 | At this interval the billing records will be gathered and printed for all of the PVC's in the node that have billing turned on. |
1.3.6.1.4.1.449.2.1.1.2.1.26 | cdx6500NMNPCmaxCalls | 1 | 1 | Limiting the number of calls allowed in the node will eliminate data loss in extreme traffic conditions. |
1.3.6.1.4.1.449.2.1.1.2.1.27 | cdx6500NMNPCpadBulletin | 1 | 1 | PAD Bulletin Message. Specifies the message that appears when a terminal connects to PAD port and enters Command Mode. To have no… |
1.3.6.1.4.1.449.2.1.1.2.1.28 | cdx6500NMNPCpadBanner | 1 | 1 | PAD Banner Message. Specifies the message PAD ports send to attached terminals when they enter Command Mode. These special charac… |
1.3.6.1.4.1.449.2.1.1.2.1.29 | cdx6500NMNPCdcpFac | 1 | 1 | This defines the facility used to carry DCP information at call setup and reconnection time in Call Request and Call Accept packe… |
1.3.6.1.4.1.449.2.1.1.2.1.30 | cdx6500NMNPCtrafficPri | 1 | 1 | Traffic Priority. This is the default traffic priority to be used on the node. newvalLow : same functionality as 'low', new enumer… |
1.3.6.1.4.1.449.2.1.1.2.1.31 | cdx6500NMNPCtrafficStep | 1 | 1 | Traffic Priority Step. This specifies the number of packets to be transmitted for each lower priority packet transmitted. |
1.3.6.1.4.1.449.2.1.1.2.1.32 | cdx6500NMNPCpropProtId | 1 | 1 | This is the Codex Proprietary Protocol ID. Its value is put in the first byte of the Protocol Identifier field of the CUD in the … |
1.3.6.1.4.1.449.2.1.1.2.1.33 | cdx6500NMNPClanSubAddr | 1 | 1 | Calls with network address composed of the node address and this subaddress will be routed to a LAN Connection in this node. |
1.3.6.1.4.1.449.2.1.1.2.1.34 | cdx6500NMNPCMaxFrameSize | 1 | 1 | The largest datalink level frame that will ever be received on any link. On WAN links this does not include space that is reserve… |
1.3.6.1.4.1.449.2.1.1.2.1.35 | cdx6500NMNPCCodexGroupFacility | 1 | 1 | This is the facility used in call packets on Codex 6500 links for passing CODEX PRIVATE facilities other than Hop Count and DCP fa… |
1.3.6.1.4.1.449.2.1.1.2.1.36 | cdx6500NMNPCalmDistrib | 1 | 1 | Distribution of alarms is controlled by specifying: NONE - no alarm is sent\r\n\ CTP - send alarms to Control Port Terminal\r\n\… |
1.3.6.1.4.1.449.2.1.1.2.1.37 | cdx6500NMNPCalmSelection | 1 | 1 | Alarm type reporting by the node: NONE - no alarms reported. HIGH - high severity alarms reported. MED - medium severity alarms r… |
1.3.6.1.4.1.449.2.1.1.2.1.38 | cdx6500NMNPChopFacility | 1 | 1 | Hop Count Facility. This is the facility used in call packets on X.25 links with the INL option for network routing. This should … |
1.3.6.1.4.1.449.2.1.1.2.1.39 | cdx6500NMNPCnumNccpDevices | 1 | 1 | This is the number of NCCP devices. |
1.3.6.1.4.1.449.2.1.1.2.1.40 | cdx6500NMNPCmaxCallid | 1 | 1 | This is the maximum number of Call id numbers that go in the Calling Identifier table. This table can have a maximum of 512 entri… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.1.2.2 | cdx6500NMNPinvent | 14 | 39 | None |
1.3.6.1.4.1.449.2.1.1.2.3 | cdx6500NMNPstats | 55 | 122 | None |