Select options on this MX.25 port as follows:
NONE - no option specified
HOLD - hold calls over link restart
CUG - check closed user group; otherwise, CUG passes
transparently
INL - inter-node link. Link goes to another 6500 device
INLA - set with INL option when an MX.25 link connection is to
a 6500 node using 2.12.04 or earlier
Any combination of the above specified by summing
(e.g. HOLD+CUG+. . .).
Parsed from file vanguard-65xx-mx25.mib.txt
Company: None
Module: MX25-OPT-MIB
Select options on this MX.25 port as follows:
NONE - no option specified
HOLD - hold calls over link restart
CUG - check closed user group; otherwise, CUG passes
transparently
INL - inter-node link. Link goes to another 6500 device
INLA - set with INL option when an MX.25 link connection is to
a 6500 node using 2.12.04 or earlier
Any combination of the above specified by summing
(e.g. HOLD+CUG+. . .).
Parsed from file MX25-OPT-MIB.mib
Module: MX25-OPT-MIB
Vendor: Codex
Module: MX25-OPT-MIB
[Automatically extracted from oidview.com]
cdx6500mx25sMX25Options OBJECT-TYPE SYNTAX DisplayString (SIZE(3..22)) ACCESS read-only STATUS mandatory DESCRIPTION "Select options on this MX.25 port as follows: NONE - no option specified HOLD - hold calls over link restart CUG - check closed user group; otherwise, CUG passes transparently INL - inter-node link. Link goes to another 6500 device INLA - set with INL option when an MX.25 link connection is to a 6500 node using 2.12.04 or earlier Any combination of the above specified by summing (e.g. HOLD+CUG+. . .)." ::= { cdx6500SPCTMX25StationEntry 10 }
cdx6500mx25sMX25Options OBJECT-TYPE SYNTAX DisplayString (SIZE(3..22)) ACCESS read-only STATUS mandatory DESCRIPTION "Select options on this MX.25 port as follows: NONE - no option specified HOLD - hold calls over link restart CUG - check closed user group; otherwise, CUG passes transparently INL - inter-node link. Link goes to another 6500 device INLA - set with INL option when an MX.25 link connection is to a 6500 node using 2.12.04 or earlier Any combination of the above specified by summing (e.g. HOLD+CUG+. . .)." ::= { cdx6500SPCTMX25StationEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.2.1.3.1.1.1 | cdx6500mx25sCfgPortNum | 0 | 0 | MX25 Port Number. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.2 | cdx6500mx25sCfgStationNum | 0 | 0 | The number of the controller on the multidrop line. Also used for routing purposes. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.3 | cdx6500mx25sStationAddress | 0 | 0 | The station address on the multidrop line. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.4 | cdx6500mx25sPVCChannels | 0 | 0 | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.5 | cdx6500mx25sStartingPVC | 0 | 0 | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.6 | cdx6500mx25sSVCChannels | 0 | 0 | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept a… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.7 | cdx6500mx25sStartingSVC | 0 | 0 | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.8 | cdx6500mx25sFrameWinSize | 0 | 0 | Frame level window size must be set to the same value in devices at each end of the link. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.9 | cdx6500mx25sPacketWinSize | 0 | 0 | Packet level window size must be set to the same value in devices at each end of the link. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.11 | cdx6500mx25sRCDestination | 0 | 0 | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.12 | cdx6500mx25sCUG | 0 | 0 | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except (e… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.13 | cdx6500mx25sBillingRecords | 0 | 0 | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.14 | cdx6500mx25sUpperQueue | 0 | 0 | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.15 | cdx6500mx25sLowerQueue | 0 | 0 | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the … |