All calls entering this port will be routed to the destination
specified in this parameter, irrespective of route selection
table entries. For example, to route calls to port 1, use P1.
To route calls to port 2, station 4, use P2S4.
Blank this field to disable this function.
Parsed from file vanguard-65xx-mx25.mib.txt
Company: None
Module: MX25-OPT-MIB
All calls entering this port will be routed to the destination
specified in this parameter, irrespective of route selection
table entries. For example, to route calls to port 1, use P1.
To route calls to port 2, station 4, use P2S4.
Blank this field to disable this function.
Parsed from file MX25-OPT-MIB.mib
Module: MX25-OPT-MIB
Vendor: Codex
Module: MX25-OPT-MIB
[Automatically extracted from oidview.com]
cdx6500mx25sRCDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function." ::= { cdx6500SPCTMX25StationEntry 11 }
cdx6500mx25sRCDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function." ::= { cdx6500SPCTMX25StationEntry 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.449.2.1.2.1.3.1.1.1 | cdx6500mx25sCfgPortNum | 0 | 0 | MX25 Port Number. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.2 | cdx6500mx25sCfgStationNum | 0 | 0 | The number of the controller on the multidrop line. Also used for routing purposes. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.3 | cdx6500mx25sStationAddress | 0 | 0 | The station address on the multidrop line. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.4 | cdx6500mx25sPVCChannels | 0 | 0 | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.5 | cdx6500mx25sStartingPVC | 0 | 0 | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.6 | cdx6500mx25sSVCChannels | 0 | 0 | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept a… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.7 | cdx6500mx25sStartingSVC | 0 | 0 | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.8 | cdx6500mx25sFrameWinSize | 0 | 0 | Frame level window size must be set to the same value in devices at each end of the link. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.9 | cdx6500mx25sPacketWinSize | 0 | 0 | Packet level window size must be set to the same value in devices at each end of the link. |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.10 | cdx6500mx25sMX25Options | 0 | 0 | Select options on this MX.25 port as follows: NONE - no option specified HOLD - hold calls over link restart CUG - check closed u… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.12 | cdx6500mx25sCUG | 0 | 0 | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except (e… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.13 | cdx6500mx25sBillingRecords | 0 | 0 | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.14 | cdx6500mx25sUpperQueue | 0 | 0 | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the… |
1.3.6.1.4.1.449.2.1.2.1.3.1.1.15 | cdx6500mx25sLowerQueue | 0 | 0 | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the … |