Reference record for OID 1.3.6.1.4.1.4491.2.1.21.1.2



parent
1.3.6.1.4.1.4491.2.1.21.1 (docsQos3MibObjects)
node code
2
node name
docsQos3ParamSetTable
dot oid
1.3.6.1.4.1.4491.2.1.21.1.2
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ParamSetTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ParamSetTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ParamSetTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ParamSetTable(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ParamSetTable(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cableLabs(4491) clabProject(2) clabProjDocsis(1) docsQos3Mib(21) docsQos3MibObjects(1) docsQos3ParamSetTable(2)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ParamSetTable
  • /iso/identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ParamSetTable
  • /iso/org/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ParamSetTable
  • /iso/org/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ParamSetTable
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ParamSetTable
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cableLabs/clabProject/clabProjDocsis/docsQos3Mib/docsQos3MibObjects/docsQos3ParamSetTable
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/4491/2/1/21/1/2

    Description by circitor

    This object describes the set of QOS parameters defined
    in a managed device.
    DOCSIS 1.0 COS service profiles are not represented
    in this object.
    Each row corresponds to a DOCSIS QOS Parameter Set as
    signaled via DOCSIS MAC management messages.Each attribute
    of an instance of this object corresponds to
    one or part of oneService Flow Encoding.
    The BitMap attribute indicates which particular parameters
    were signaled in the original registration
    or dynamic service request message that created the
    QOS Parameter Set.
    In many cases, even if a QOS Parameter Set parameter was
    not signaled, the DOCSIS specification calls for
    a default value to be used. That default value is reported
    as the value of the corresponding attribute in this
    object instance.

    Many attributes are not applicable, depending on the
    Service Flow direction, upstream scheduling type
    or Service Flow bonding configuration. The attribute
    value reported in this case is specified by those attributes
    descriptions.

    Parsed from file DOCS-QOS3-MIB.mib
    Module: DOCS-QOS3-MIB

    Description by cisco_v1

    This object describes the set of QOS parameters defined
    in a managed device.
    DOCSIS 1.0 COS service profiles are not represented
    in this object.
    Each row corresponds to a DOCSIS QOS Parameter Set as
    signaled via DOCSIS MAC management messages.Each attribute
    of an instance of this object corresponds to
    one or part of oneService Flow Encoding.
    The BitMap attribute indicates which particular parameters
    were signaled in the original registration
    or dynamic service request message that created the
    QOS Parameter Set.
    In many cases, even if a QOS Parameter Set parameter was
    not signaled, the DOCSIS specification calls for
    a default value to be used. That default value is reported
    as the value of the corresponding attribute in this
    object instance.

    Many attributes are not applicable, depending on the
    Service Flow direction, upstream scheduling type
    or Service Flow bonding configuration. The attribute
    value reported in this case is specified by those attributes
    descriptions.

    Description by mibdepot

    This object describes the set of QOS parameters defined
    in a managed device.
    DOCSIS 1.0 COS service profiles are not represented
    in this object.
    Each row corresponds to a DOCSIS QOS Parameter Set as
    signaled via DOCSIS MAC management messages.Each attribute
    of an instance of this object corresponds to
    one or part of oneService Flow Encoding.
    The BitMap attribute indicates which particular parameters
    were signaled in the original registration
    or dynamic service request message that created the
    QOS Parameter Set.
    In many cases, even if a QOS Parameter Set parameter was
    not signaled, the DOCSIS specification calls for
    a default value to be used. That default value is reported
    as the value of the corresponding attribute in this
    object instance.

    Many attributes are not applicable, depending on the
    Service Flow direction, upstream scheduling type
    or Service Flow bonding configuration. The attribute
    value reported in this case is specified by those attributes
    descriptions.

    Parsed from file DOCS-QOS3-MIB.my.txt
    Company: None
    Module: DOCS-QOS3-MIB

    Description by cisco

    This object describes the set of QOS parameters defined
    in a managed device.
    DOCSIS 1.0 COS service profiles are not represented
    in this object.
    Each row corresponds to a DOCSIS QOS Parameter Set as
    signaled via DOCSIS MAC management messages.Each attribute
    of an instance of this object corresponds to
    one or part of oneService Flow Encoding.
    The BitMap attribute indicates which particular parameters
    were signaled in the original registration
    or dynamic service request message that created the
    QOS Parameter Set.
    In many cases, even if a QOS Parameter Set parameter was
    not signaled, the DOCSIS specification calls for
    a default value to be used. That default value is reported
    as the value of the corresponding attribute in this
    object instance.

    Many attributes are not applicable, depending on the
    Service Flow direction, upstream scheduling type
    or Service Flow bonding configuration. The attribute
    value reported in this case is specified by those attributes
    descriptions.

    Information by circitor

    docsQos3ParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the set of QOS parameters defined in a managed device. DOCSIS 1.0 COS service profiles are not represented in this object. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages.Each attribute of an instance of this object corresponds to one or part of oneService Flow Encoding. The BitMap attribute indicates which particular parameters were signaled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signaled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding attribute in this object instance. Many attributes are not applicable, depending on the Service Flow direction, upstream scheduling type or Service Flow bonding configuration. The attribute value reported in this case is specified by those attributes descriptions." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 2}

    Information by cisco_v1

    docsQos3ParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ParamSetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This object describes the set of QOS parameters defined in a managed device. DOCSIS 1.0 COS service profiles are not represented in this object. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages.Each attribute of an instance of this object corresponds to one or part of oneService Flow Encoding. The BitMap attribute indicates which particular parameters were signaled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signaled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding attribute in this object instance. Many attributes are not applicable, depending on the Service Flow direction, upstream scheduling type or Service Flow bonding configuration. The attribute value reported in this case is specified by those attributes descriptions." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 2 }

    Information by oid_info

    Vendor: Cable Television Laboratories, Inc.
    Module: DOCS-QOS3-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    docsQos3ParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the set of QOS parameters defined in a managed device. DOCSIS 1.0 COS service profiles are not represented in this object. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages.Each attribute of an instance of this object corresponds to one or part of oneService Flow Encoding. The BitMap attribute indicates which particular parameters were signaled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signaled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding attribute in this object instance. Many attributes are not applicable, depending on the Service Flow direction, upstream scheduling type or Service Flow bonding configuration. The attribute value reported in this case is specified by those attributes descriptions." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 2}

    Information by cisco

    docsQos3ParamSetTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsQos3ParamSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object describes the set of QOS parameters defined in a managed device. DOCSIS 1.0 COS service profiles are not represented in this object. Each row corresponds to a DOCSIS QOS Parameter Set as signaled via DOCSIS MAC management messages.Each attribute of an instance of this object corresponds to one or part of oneService Flow Encoding. The BitMap attribute indicates which particular parameters were signaled in the original registration or dynamic service request message that created the QOS Parameter Set. In many cases, even if a QOS Parameter Set parameter was not signaled, the DOCSIS specification calls for a default value to be used. That default value is reported as the value of the corresponding attribute in this object instance. Many attributes are not applicable, depending on the Service Flow direction, upstream scheduling type or Service Flow bonding configuration. The attribute value reported in this case is specified by those attributes descriptions." REFERENCE "DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I05-070803, Service Flow Encodings section in the Common Radio Frequency Interface Encodings Annex." ::= { docsQos3MibObjects 2 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Ralph Brown

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.4491)

    Maria Stachelek

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.21.1.2.1 docsQos3ParamSetEntry 35 35 The conceptual row of docsQos3ParamSetTable.
    The ifIndex key corresponds to the MAC Domain interface of the
    service flow of this …

    Brothers (21)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.4491.2.1.21.1.1 docsQos3PktClassTable 1 30 This object describes the packet classification
    configured on the CM or CMTS.
    The model is that a packet either received as input…
    1.3.6.1.4.1.4491.2.1.21.1.3 docsQos3ServiceFlowTable 1 9 This object describes the set of DOCSIS-QOS Service
    Flows in a managed device.
    1.3.6.1.4.1.4491.2.1.21.1.4 docsQos3ServiceFlowStatsTable 1 8 This object describes statistics associated with
    the Service Flows in a managed device.
    1.3.6.1.4.1.4491.2.1.21.1.5 docsQos3UpstreamStatsTable 1 5 This object describes statistics associated with
    upstream service flows. All counted frames must be
    received without a Frame Che…
    1.3.6.1.4.1.4491.2.1.21.1.6 docsQos3DynamicServiceStatsTable 1 29 This object describes statistics associated with
    the Dynamic Service Flows, Dynamic Channel Changes
    and Dynamic Bonding Changes i…
    1.3.6.1.4.1.4491.2.1.21.1.7 docsQos3ServiceFlowLogTable 1 16 This object contains a log of the disconnected Service
    Flows in a managed device.
    1.3.6.1.4.1.4491.2.1.21.1.8 docsQos3ServiceClassTable 1 37 This object describes a provisioned service class
    on a CMTS.
    Each object instance defines a template for certain
    DOCSIS QOS Parame…
    1.3.6.1.4.1.4491.2.1.21.1.10 docsQos3PHSTable 1 6 This object describes the set of payload header suppression
    of Service Flows.
    1.3.6.1.4.1.4491.2.1.21.1.11 docsQos3CmtsMacToSrvFlowTable 1 4 This object provides the mapping of unicast service
    flows with the cable modem the service flows belongs
    to.
    1.3.6.1.4.1.4491.2.1.21.1.12 docsQos3ServiceFlowSidClusterTable 1 4 This object defines the SID clusters associated with
    an upstream service flow.
    1.3.6.1.4.1.4491.2.1.21.1.13 docsQos3GrpServiceFlowTable 1 4 This object provides extensions to the service flow
    information for Group Service Flows (GSFs).
    1.3.6.1.4.1.4491.2.1.21.1.14 docsQos3GrpPktClassTable 1 2 This object provides additional packet classification
    information for Group Classifier References
    (GCRs) in a Group Service Flow …
    1.3.6.1.4.1.4491.2.1.21.1.15 docsQos3UpChCounterExtTable 1 3 This object provides extensions for service flow
    statistics for fragmentation for channel bonding.
    1.3.6.1.4.1.4491.2.1.21.1.16 docsQos3ServiceFlowCcfStatsTable 1 3 This object provides upstream service flow statistics
    for Continous Concatenation and Fragmentation
    (CCF).
    The CMTS MAY not instan…
    1.3.6.1.4.1.4491.2.1.21.1.17 docsQos3CmServiceUsStatsTable 1 8 This object defines DOCSIS MAC services primitive
    statistics of upstream service flows. In pre-3.0 DOCSIS
    devices this statistics…
    1.3.6.1.4.1.4491.2.1.21.1.18 docsQos3CmtsDsidTable 1 8 This object describes DSID information stored in
    the CMTS.
    The CMTS reports the current status of existing DSIDs.
    When a DSID is c…
    1.3.6.1.4.1.4491.2.1.21.1.19 docsQos3CmtsDebugDsidTable 1 3 The CMTS Debug DSID object contains the control of
    DSID debug statistics reporting
    An instance in this object defines the DSID an…
    1.3.6.1.4.1.4491.2.1.21.1.20 docsQos3CmtsDebugDsidStatsTable 1 4 The CMTS Debug DSID Stats object describes statistics
    at the CMTS for the forwarding of DSID-labeled downstream
    packets.
    The CMTS …
    1.3.6.1.4.1.4491.2.1.21.1.21 docsQos3CmDsidTable 1 12 When a DSID is created, during the registration process
    or a DBC transaction,. The CM reports the current
    status of existing DSID…
    1.3.6.1.4.1.4491.2.1.21.1.22 docsQos3CmDsidStatsTable 1 6 This object defines a set of statistics the CM collects
    per Dsid.
    1.3.6.1.4.1.4491.2.1.21.1.23 docsQos3CmDsidClientTable 1 4 This object contains the client MAC addresses that
    the CMTS requests that the CM uses to replicate Multicast
    DSIDs during registr…