The stack IPv6 address of a stackable system. A non-stackable
system should never return an instance of this object, nor allow
writes to this object. Note that in standalone mode, this will
still be the stack IPv6 address, even though it is not in use.
When in stack mode, the IPv6 address of individual units can be
found in the s5ChasComTable in the s5Chassis MIB (and note that
these addresses will not be in use when in stack mode).
Parsed from file s5age120.mib.txt
Company: nortel
Module: S5-AGENT-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
s5AgSysStackIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-write STATUS current DESCRIPTION "The stack IPv6 address of a stackable system. A non-stackable system should never return an instance of this object, nor allow writes to this object. Note that in standalone mode, this will still be the stack IPv6 address, even though it is not in use. When in stack mode, the IPv6 address of individual units can be found in the s5ChasComTable in the s5Chassis MIB (and note that these addresses will not be in use when in stack mode)." ::= { s5AgentSystem 47 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.4.47.0 | s5AgSysStackIpv6Address | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.4.1 | s5AgSysAutoPvid | 1 | 1 | This value indicates whether adding a port as a member of a VLAN automatically results in its PVID being set to be the same as th… |
| 1.3.6.1.4.1.45.1.6.4.4.2 | s5AgSysCurrentOperationalMode | 1 | 1 | Indicates the stacking mode. Pure stack mode does not allow BS450 and BS410 units to join stack and provides some advanced featu… |
| 1.3.6.1.4.1.45.1.6.4.4.3 | s5AgSysNextBootOperationalMode | 1 | 1 | Indicates the stacking mode at the next boot. A change to this object will modify the stacking mode after the system is reset/re… |
| 1.3.6.1.4.1.45.1.6.4.4.4 | s5AgSysBinaryConfigFilename | 1 | 1 | Name of the binary configuration file that will be downloaded/uploaded when the s5AgInfoFileAction object is set to dnldConfig(2)… |
| 1.3.6.1.4.1.45.1.6.4.4.5 | s5AgSysTftpServerAddress | 1 | 1 | The IP address of the TFTP server for all TFTP operations. If not used, then the value is 0.0.0.0 |
| 1.3.6.1.4.1.45.1.6.4.4.6 | s5AgSysAsciiConfigFilename | 1 | 1 | Name of the ascii configuration file that will be downloaded/uploaded either at boot time when the s5AgSysAsciiConfigAutoDownload… |
| 1.3.6.1.4.1.45.1.6.4.4.7 | s5AgSysAsciiConfigAutoDownload | 1 | 1 | Indicates whether an ASCII configuration file should be downloaded at boot time. The file can be downloaded using either the con… |
| 1.3.6.1.4.1.45.1.6.4.4.8 | s5AgSysAsciiConfigAutoDldStatus | 1 | 1 | Indicates the status of the last automatic ASCII configuration file download at boot time. If no automatic download at boot time… |
| 1.3.6.1.4.1.45.1.6.4.4.9 | s5AgSysAsciiConfigManualDownload | 1 | 1 | Indicates the status of the last manual attempt to download an ASCII configuration file. The value of this object when retrieved… |
| 1.3.6.1.4.1.45.1.6.4.4.10 | s5AgSysCpuIpAddress | 1 | 1 | The system's CPU IP address. Note that for a stackable system in standalone mode, this will be the standalone IP address, but in… |
| 1.3.6.1.4.1.45.1.6.4.4.11 | s5AgSysStackIpAddress | 1 | 1 | The stack IP address of a stackable system. A non-stackable system should never return an instance of this object, nor allow wri… |
| 1.3.6.1.4.1.45.1.6.4.4.12 | s5AgSysCpuNetMask | 1 | 1 | The system's CPU subnet mask. |
| 1.3.6.1.4.1.45.1.6.4.4.13 | s5AgSysManagementVlanId | 1 | 1 | The VLAN ID of the system's management VLAN. |
| 1.3.6.1.4.1.45.1.6.4.4.14 | s5AgSysBinaryConfigUnitNumber | 1 | 1 | When in standalone mode, and loading a binary configuration file that was created from a stack, this object specifies the unit nu… |
| 1.3.6.1.4.1.45.1.6.4.4.15 | s5AgSysStackInsertionUnitNumber | 1 | 1 | When in stack mode, this object specifies the unit number to be assigned to the next unit that joins the stack. The value may no… |
| 1.3.6.1.4.1.45.1.6.4.4.16 | s5AgSysSpanningTreeOperMode | 1 | 1 | This object indicates the current spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older… |
| 1.3.6.1.4.1.45.1.6.4.4.17 | s5AgSysSpanningTreeAdminMode | 1 | 1 | This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older… |
| 1.3.6.1.4.1.45.1.6.4.4.18 | s5AgSysAutoUnitReplacementEnabled | 1 | 1 | This object indicates whether the auto-unit-replacement feature is enabled or disabled. The value when retrieved will always be… |
| 1.3.6.1.4.1.45.1.6.4.4.19 | s5AgSysAsciiConfigManualUpload | 1 | 1 | Indicates the status of the last manual attempt to upload an ASCII configuration file. The value of this object when retrieved c… |
| 1.3.6.1.4.1.45.1.6.4.4.20 | s5AgSysSpanningTreePathCostCalculationMode | 1 | 1 | This object indicates the current spanning-tree path cost calculation mode of the system. Note that this object can only take th… |
| 1.3.6.1.4.1.45.1.6.4.4.21 | s5AgSysUsbTargetUnit | 1 | 1 | This object indicates the unit number of the USB port to be use in file upload/download operations. |
| 1.3.6.1.4.1.45.1.6.4.4.22 | s5AgSysSpanningTreePortMode | 1 | 1 | This object indicates the current spanning-tree port mode. |
| 1.3.6.1.4.1.45.1.6.4.4.23 | s5AgSysLicenseFilename | 1 | 1 | Name of the license file that will be downloaded/uploaded when the s5AgInfoFileAction object is set to dnldLicense(18), upldLicen… |
| 1.3.6.1.4.1.45.1.6.4.4.24 | s5AgSysSpanningTreeAdminCompatibility | 1 | 1 | This object controls the compatibility mode for various features. Note that for some features, the actual operational mode might… |
| 1.3.6.1.4.1.45.1.6.4.4.25 | s5AgSysSpanningTreeOperCompatibility | 1 | 1 | This object indicates the operational compatibility mode for various features controlled by the associated object, s5AgSysSpannin… |
| 1.3.6.1.4.1.45.1.6.4.4.26 | s5AgSysGlobalFlowControlEnabled | 1 | 1 | This object controls whether flow control for ethernet ports is globally enabled or disabled. This object is only used on system… |
| 1.3.6.1.4.1.45.1.6.4.4.27 | s5AgSysAutosaveToNvramEnabled | 1 | 1 | This object controls whether autosaving to NVRAM is enabled. Autosaving normally occurs periodically in a background task if any … |
| 1.3.6.1.4.1.45.1.6.4.4.28 | s5AgSysFlushMacAddrTableAll | 1 | 1 | Setting this object to flush(1) will flush the CDT MAC address table. On retrieval, its value is always flush(1). |
| 1.3.6.1.4.1.45.1.6.4.4.29 | s5AgSysFlushMacAddrTableByPortList | 1 | 1 | Setting this object will flush the CDT MAC address for all ports specified in the value. On retrieval, the value is the last val… |
| 1.3.6.1.4.1.45.1.6.4.4.30 | s5AgSysFlushMacAddrTableByVlan | 1 | 1 | Setting this object will flush the CDT MAC address table for the specified VLAN. On retrieval, the value is the last value set, … |
| 1.3.6.1.4.1.45.1.6.4.4.31 | s5AgSysFlushMacAddrTableByTrunk | 1 | 1 | Setting this object will flush the CDT MAC address table for the specified trunk. On retrieval, the value is the last value set,… |
| 1.3.6.1.4.1.45.1.6.4.4.32 | s5AgSysFlushMacAddrTableByAddress | 1 | 1 | Setting this object will flush the specified MAC address from the CDT MAC address table. On retrieval, its value is the last val… |
| 1.3.6.1.4.1.45.1.6.4.4.33 | s5AgSysVlanConfigControl | 1 | 1 | This object controls the VLAN configuration control mode: automatic - AutoPVID and automatic change to membership of port-based V… |
| 1.3.6.1.4.1.45.1.6.4.4.34 | s5AgSysJumboFramesEnabled | 1 | 1 | This object controls whether jumbo frames are supported. |
| 1.3.6.1.4.1.45.1.6.4.4.35 | s5AgSysAutoUnitReplacementSaveEnabled | 1 | 1 | This object indicates whether auto-unit-replacement automatic saving of unit images to the base unit is enabled. |
| 1.3.6.1.4.1.45.1.6.4.4.36 | s5AgSysAutoUnitReplacementRestore | 1 | 1 | This object is used to force the configuration of a unit to be restored from the saved configuration on the base unit. Setting t… |
| 1.3.6.1.4.1.45.1.6.4.4.37 | s5AgSysAutoUnitReplacementForceSave | 1 | 1 | This object is used to force the configuration of a non-base unit to be saved to the base unit. Setting it to a particular unit … |
| 1.3.6.1.4.1.45.1.6.4.4.38 | s5AgSysTftpServerInetAddressType | 1 | 1 | This object indicates the type of address stored in the related object s5AgSysTftpServerInetAddress. |
| 1.3.6.1.4.1.45.1.6.4.4.39 | s5AgSysTftpServerInetAddress | 1 | 1 | This object contains the IP address of the TFTP server for all TFTP operations. |
| 1.3.6.1.4.1.45.1.6.4.4.40 | s5AgSysTelnetSessionLoginAuthenType | 1 | 1 | This object controls the authentication method used for telnet session logins. The values of this object have the following mea… |
| 1.3.6.1.4.1.45.1.6.4.4.41 | s5AgSysSerialConsoleLoginAuthenType | 1 | 1 | This object controls the authentication method used for serial console logins. The values of this object have the following mea… |
| 1.3.6.1.4.1.45.1.6.4.4.42 | s5AgSysSshAuthKeyFilename | 1 | 1 | Name of the Ssh authentication key file that will be downloaded when the s5AgInfoFileAction object is set to dnldSshAuthKeyFromU… |
| 1.3.6.1.4.1.45.1.6.4.4.43 | s5AgSysAsciiConfigManualUploadApplications | 1 | 1 | This objects is used to specify the set of applications to be included an an ASCII configure file when it is uploaded. |
| 1.3.6.1.4.1.45.1.6.4.4.44 | s5AgSysOperationalLicense | 1 | 1 | The type of license currently in effect. |
| 1.3.6.1.4.1.45.1.6.4.4.45 | s5AgSysInstalledLicense | 1 | 1 | The type of license currently installed. |
| 1.3.6.1.4.1.45.1.6.4.4.46 | s5AgSysCpuIpv6Address | 1 | 1 | The system's CPU IPv6 address. Note that for a stackable system in standalone mode, this will be the standalone IPv6 address, bu… |
| 1.3.6.1.4.1.45.1.6.4.4.48 | s5AgSysCpuIpv6NetMask | 1 | 1 | The system's CPU IPv6 subnet mask. |
| 1.3.6.1.4.1.45.1.6.4.4.49 | s5AgSysStackIpv6NetMask | 1 | 1 | The system's CPU IPv6 subnet mask. |
| 1.3.6.1.4.1.45.1.6.4.4.50 | s5AgSysIpv6DefaultGateway | 1 | 1 | The system's IPv6 default gateway. |