The 802.1p user priority value against which
the value contained in the user priority
field of a tagged 802.1 frame is compared. A
test for equality is performed when
determining if a match exists between the data
in a data link layer frame and the value of
this classifier.
Setting the value of this object to
'matchAllPriorities(9)' causes all user priority
values to match this attribute. This essentially
makes any comparisons with regard to user
priority values unnecessary.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Vendor: Avaya
Module: NTN-QOS-POLICY-EVOL-PIB (NTN-QOS-POLICY-EVOL-PIB.mib)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ntnQosL2AccessElemUserPriority OBJECT-TYPE SYNTAX INTEGER { matchPriority0(1), matchPriority1(2), matchPriority2(3), matchPriority3(4), matchPriority4(5), matchPriority5(6), matchPriority6(7), matchPriority7(8), matchAllPriorities(9) } MAX-ACCESS read-create STATUS current DESCRIPTION "The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is performed when determining if a match exists between the data in a data link layer frame and the value of this classifier. Setting the value of this object to 'matchAllPriorities(9)' causes all user priority values to match this attribute. This essentially makes any comparisons with regard to user priority values unnecessary." DEFVAL { matchAllPriorities } ::= { ntnQosL2AccessElemEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7.1.13.4.1.1 | ntnQosL2AccessElemId | 0 | 0 | An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntn… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.2 | ntnQosL2AccessElemDstAddr | 0 | 0 | The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical ad… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.3 | ntnQosL2AccessElemDstAddrMask | 0 | 0 | This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.4 | ntnQosL2AccessElemSrcAddr | 0 | 0 | The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches th… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.5 | ntnQosL2AccessElemSrcAddrMask | 0 | 0 | This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison agai… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.6 | ntnQosL2AccessElemVlanIdMin | 0 | 0 | The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessE… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.7 | ntnQosL2AccessElemVlanIdMax | 0 | 0 | The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessE… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.8 | ntnQosL2AccessElemVlanTag | 0 | 0 | This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untag… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.9 | ntnQosL2AccessElemEtherType | 0 | 0 | This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Ex… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.11 | ntnQosL2AccessElemActionDrop | 0 | 0 | This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', whe… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.12 | ntnQosL2AccessElemActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.13 | ntnQosL2AccessElemActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.14 | ntnQosL2AccessElemActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.15 | ntnQosL2AccessElemName | 0 | 0 | A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an acces… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.16 | ntnQosL2AccessElemBlock | 0 | 0 | A label used to identify access elements that are members of the same classification block. Access elements are members of the sam… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.17 | ntnQosL2AccessElemType | 0 | 0 | Identifies the L2 access element type. Designates the higher-level application through which this entry was created. |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.18 | ntnQosL2AccessElemStorage | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.19 | ntnQosL2AccessElemStatus | 0 | 0 | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate … |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.20 | ntnQosL2AccessElemEvalPrec | 0 | 0 | An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tabl… |