This object specifies the bits in a 802 MAC
source address that should be considered when
performing a 802 MAC SA comparison against
the address specified in the
ntnQosL2AccessElemSrcAddr object.
The value of this object represents a mask
that is logically and'ed with the 802 MAC SA
in received frames to derive the value to be
compared against the ntnQosL2AccessElemSrcAddr
address. A zero bit in the mask thus means that
the corresponding bit in the address always
matches. The ntnQosL2AccessElemSrcAddr value
must also be masked using this value prior to
any comparisons.
The length of this object in octets must equal
the length in octets of the
ntnQosL2AccessElemSrcAddr. Note that a mask
with no bits set (i.e., all zeroes) effectively
wildcards the ntnQosL2AccessElemSrcAddr object.
Parsed from file pibNtnEvol_004.mib.txt
Company: baynetworks
Module: NTN-QOS-POLICY-EVOL-PIB
Vendor: Avaya
Module: NTN-QOS-POLICY-EVOL-PIB (NTN-QOS-POLICY-EVOL-PIB.mib)
Type: TABULAR
Access: read-create
Syntax: MacAddress
Automatically extracted from www.mibdepot.com
ntnQosL2AccessElemSrcAddrMask OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the ntnQosL2AccessElemSrcAddr object. The value of this object represents a mask that is logically and'ed with the 802 MAC SA in received frames to derive the value to be compared against the ntnQosL2AccessElemSrcAddr address. A zero bit in the mask thus means that the corresponding bit in the address always matches. The ntnQosL2AccessElemSrcAddr value must also be masked using this value prior to any comparisons. The length of this object in octets must equal the length in octets of the ntnQosL2AccessElemSrcAddr. Note that a mask with no bits set (i.e., all zeroes) effectively wildcards the ntnQosL2AccessElemSrcAddr object." DEFVAL { '000000000000'h } ::= { ntnQosL2AccessElemEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.45.4.7.1.13.4.1.1 | ntnQosL2AccessElemId | 0 | 0 | An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntn… |
1.3.6.1.4.1.45.4.7.1.13.4.1.2 | ntnQosL2AccessElemDstAddr | 0 | 0 | The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical ad… |
1.3.6.1.4.1.45.4.7.1.13.4.1.3 | ntnQosL2AccessElemDstAddrMask | 0 | 0 | This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against… |
1.3.6.1.4.1.45.4.7.1.13.4.1.4 | ntnQosL2AccessElemSrcAddr | 0 | 0 | The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches th… |
1.3.6.1.4.1.45.4.7.1.13.4.1.6 | ntnQosL2AccessElemVlanIdMin | 0 | 0 | The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessE… |
1.3.6.1.4.1.45.4.7.1.13.4.1.7 | ntnQosL2AccessElemVlanIdMax | 0 | 0 | The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessE… |
1.3.6.1.4.1.45.4.7.1.13.4.1.8 | ntnQosL2AccessElemVlanTag | 0 | 0 | This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untag… |
1.3.6.1.4.1.45.4.7.1.13.4.1.9 | ntnQosL2AccessElemEtherType | 0 | 0 | This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Ex… |
1.3.6.1.4.1.45.4.7.1.13.4.1.10 | ntnQosL2AccessElemUserPriority | 0 | 0 | The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. … |
1.3.6.1.4.1.45.4.7.1.13.4.1.11 | ntnQosL2AccessElemActionDrop | 0 | 0 | This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', whe… |
1.3.6.1.4.1.45.4.7.1.13.4.1.12 | ntnQosL2AccessElemActionRemarkDscp | 0 | 0 | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated I… |
1.3.6.1.4.1.45.4.7.1.13.4.1.13 | ntnQosL2AccessElemActionRemarkCos | 0 | 0 | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated… |
1.3.6.1.4.1.45.4.7.1.13.4.1.14 | ntnQosL2AccessElemActionSetPrec | 0 | 0 | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop pre… |
1.3.6.1.4.1.45.4.7.1.13.4.1.15 | ntnQosL2AccessElemName | 0 | 0 | A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an acces… |
1.3.6.1.4.1.45.4.7.1.13.4.1.16 | ntnQosL2AccessElemBlock | 0 | 0 | A label used to identify access elements that are members of the same classification block. Access elements are members of the sam… |
1.3.6.1.4.1.45.4.7.1.13.4.1.17 | ntnQosL2AccessElemType | 0 | 0 | Identifies the L2 access element type. Designates the higher-level application through which this entry was created. |
1.3.6.1.4.1.45.4.7.1.13.4.1.18 | ntnQosL2AccessElemStorage | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
1.3.6.1.4.1.45.4.7.1.13.4.1.19 | ntnQosL2AccessElemStatus | 0 | 0 | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate … |
1.3.6.1.4.1.45.4.7.1.13.4.1.20 | ntnQosL2AccessElemEvalPrec | 0 | 0 | An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tabl… |