CSU 'ones density' monitor. Defines the maximum number of
consecutive zeros that can be transmitted to the network.
If density monitoring is enabled, the composite signal
is guaranteed to meet the selected density threshhold at
the expense of user data. No-density (4) should be used
if B8ZS Line Encoding is chosen or if Channel Density is
bit-7-stuff. This option is not applicable if DSX-1 mode
is selected.
Parsed from file tylink-3250.mib.txt
Company: None
Module: TY3250I-MIB
CSU 'ones density' monitor. Defines the maximum number of
consecutive zeros that can be transmitted to the network.
If density monitoring is enabled, the composite signal
is guaranteed to meet the selected density threshhold at
the expense of user data. No-density (4) should be used
if B8ZS Line Encoding is chosen or if Channel Density is
bit-7-stuff. This option is not applicable if DSX-1 mode
is selected.
Parsed from file TY3250I-MIB.mib
Module: TY3250I-MIB
Vendor: Tylink
Module: TY3250I-MIB
[Automatically extracted from oidview.com]
ty3250CfgT1Density OBJECT-TYPE SYNTAX INTEGER { no-density (1), twelve-half-percent (2), one-in-16 (3), one-in-64 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "CSU 'ones density' monitor. Defines the maximum number of consecutive zeros that can be transmitted to the network. If density monitoring is enabled, the composite signal is guaranteed to meet the selected density threshhold at the expense of user data. No-density (4) should be used if B8ZS Line Encoding is chosen or if Channel Density is bit-7-stuff. This option is not applicable if DSX-1 mode is selected." ::= { ty3250CfgT1Table 3 }
ty3250CfgT1Density OBJECT-TYPE SYNTAX INTEGER { no-density (1), twelve-half-percent (2), one-in-16 (3), one-in-64 (4) } ACCESS read-write STATUS mandatory DESCRIPTION "CSU 'ones density' monitor. Defines the maximum number of consecutive zeros that can be transmitted to the network. If density monitoring is enabled, the composite signal is guaranteed to meet the selected density threshhold at the expense of user data. No-density (4) should be used if B8ZS Line Encoding is chosen or if Channel Density is bit-7-stuff. This option is not applicable if DSX-1 mode is selected." ::= { ty3250CfgT1Table 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.466.4.3.3.0 | ty3250CfgT1Density | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.466.4.3.1 | ty3250CfgT1Framing | 1 | 1 | Type of Framing on this T1 Line. Check with your service provider to determine value. D4 is also known as 'SuperFrame', ESF is … |
| 1.3.6.1.4.1.466.4.3.2 | ty3250CfgT1LineEncoding | 1 | 1 | T1 interface bipolar encoding scheme. Check with your service provider to determine value. B8ZS, which inherently provides ample… |
| 1.3.6.1.4.1.466.4.3.4 | ty3250CfgT1Interface | 1 | 1 | Enables CSU-specific functions if CSU (1) is selected. CSU functions include Line Build-out, density monitoring, and certain diag… |
| 1.3.6.1.4.1.466.4.3.5 | ty3250CfgT1LboSetting | 1 | 1 | CSU Line Build Out. Consult service provider for proper setting; either 0dB (1), -7.5dB (2), or -15dB (3). Not applicable if T1In… |
| 1.3.6.1.4.1.466.4.3.6 | ty3250CfgT1Timing | 1 | 1 | T1 network interface timing source. There must be only one source on a T1 line. Node should typically be network (2) timed on a… |
| 1.3.6.1.4.1.466.4.3.7 | ty3250CfgT1CicuitID | 1 | 1 | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |