An entry consisting of port information for a
particular Bisync port.
Parsed from file 3Com-linkconv.mib.txt
Company: None
Module: SYNC-RESEARCH-MIB
An entry consisting of port information for a
particular Bisync port.
Parsed from file SYNC-RESEARCH-MIB.mib
Module: SYNC-RESEARCH-MIB
Vendor: Sync Research, Inc.
Module: SYNC-RESEARCH-MIB
[Automatically extracted from oidview.com]
bisyncConfigEntry OBJECT-TYPE SYNTAX BisyncConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry consisting of port information for a particular Bisync port." INDEX { bisyncConfigPortIndex } ::= { bisyncConfigTable 1 }
bisyncConfigEntry OBJECT-TYPE SYNTAX BisyncConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry consisting of port information for a particular Bisync port." INDEX { bisyncConfigPortIndex } ::= { bisyncConfigTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.3.5.4.1.1.1 | bisyncConfigPortIndex | 0 | 0 | The port number that uniquely identifies this port. Current supported Bisync numbers are 1-4. |
1.3.6.1.4.1.485.3.5.4.1.1.2 | bisyncConfigType | 0 | 0 | The port type. TBSC (Terminal Bisync) ports emulate a Host and polls the downstream controllers). HBSC ports (Host Bisync) ports e… |
1.3.6.1.4.1.485.3.5.4.1.1.3 | bisyncNAUName | 0 | 0 | The NAU name of this port. The default value for this field is all blank (filled with ASCII space 0x20 characters). |
1.3.6.1.4.1.485.3.5.4.1.1.4 | bisyncInitState | 0 | 0 | The initial state of the Bisync port. If configured for 'in-service', then the Bisync port will be brougt up automattically when … |
1.3.6.1.4.1.485.3.5.4.1.1.5 | bisyncCarrier | 0 | 0 | This field indicates whether Carrier (a.k.a. CD or DCD, RS-232 pin 8) is constant or switched for DCE devices (internally clocked… |
1.3.6.1.4.1.485.3.5.4.1.1.6 | bisyncClocking | 0 | 0 | Clocking source for this port. Setting 'internal' will cause the port to emulate a physical DCE, and setting external will cause t… |
1.3.6.1.4.1.485.3.5.4.1.1.7 | bisyncSpeed | 0 | 0 | The ports speed in bits per second. The default value is 9600 bits per second. Speeds higher than 64000 are not supported. |
1.3.6.1.4.1.485.3.5.4.1.1.8 | bisyncPause | 0 | 0 | This parameter defines the amount of time between polls in 1/100 second (10 millisecond) intervals. If set to zero then the port… |
1.3.6.1.4.1.485.3.5.4.1.1.9 | bisyncReplyTimer | 0 | 0 | The time to wait for a response in seconds. The default value for this field is 3 seconds. |
1.3.6.1.4.1.485.3.5.4.1.1.10 | bisyncRetries | 0 | 0 | The maximum number of retries (N2 value) before failing a CU. The default value for this field is 5. |
1.3.6.1.4.1.485.3.5.4.1.1.11 | bisyncSlowpollTimer | 0 | 0 | The time to wait in seconds before attempting a slowpoll. The default value for this field is 30 seconds. |
1.3.6.1.4.1.485.3.5.4.1.1.12 | bisyncSessTerm | 0 | 0 | The type of session termination used. Only applies to Host BSC ports. |
1.3.6.1.4.1.485.3.5.4.1.1.13 | bisyncIBS | 0 | 0 | Some of non IBM 3270 BSC controllers can not handle ESC character but IBM 3270 BSC implementation requires ESC character. A new … |
1.3.6.1.4.1.485.3.5.4.1.1.14 | bisyncCTS | 0 | 0 | Defines whether CTS is an input signal used to determine the port status. This parameter is applicable if clocking is set to exte… |
1.3.6.1.4.1.485.3.5.4.1.1.15 | bisyncDCD | 0 | 0 | Defines whether DCD is required as input signal or ignored. This parameter is applicable if the clocking is set to external. For… |
1.3.6.1.4.1.485.3.5.4.1.1.16 | bisyncDSR | 0 | 0 | Defines whether DSR is required as input signal or ignored. This parameter is applicable if the clocking is set to external. For… |
1.3.6.1.4.1.485.3.5.4.1.1.17 | bisyncDTR | 0 | 0 | Defines whether DTR is required as input signal or ignored. This parameter is applicable if the clocking is set to internal. For… |
1.3.6.1.4.1.485.3.5.4.1.1.18 | bisyncRTS | 0 | 0 | Defines whether RTS is an input signal to determine the port status. This parameter is applicable if the clocking is set to inter… |
1.3.6.1.4.1.485.3.5.4.1.1.19 | bisyncReturnClock | 0 | 0 | Defines whether Return Clock (SCTE) is available as input signal or ignored. This parameter is applicable if the clocking is set … |