Controls the reporting of the status of the DTE's Request
to Send (RTS) control signal, specifically the generation
of traps in response to control signal state changes. If
Internally Held Active, the unit will ignore the actual
status and always report this signal Active. If External,
the unit will reflect the status as driven by the DTE; as
such, Traps will be generated due to change of state (these
may be useful for a network manager's assessment of interface
status.
(1) Internally Held Active
(2) Externally Presented from DTE
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
Controls the reporting of the status of the DTE's Request
to Send (RTS) control signal, specifically the generation
of traps in response to control signal state changes. If
Internally Held Active, the unit will ignore the actual
status and always report this signal Active. If External,
the unit will reflect the status as driven by the DTE; as
such, Traps will be generated due to change of state (these
may be useful for a network manager's assessment of interface
status.
(1) Internally Held Active
(2) Externally Presented from DTE
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapCfgDteRts OBJECT-TYPE SYNTAX INTEGER { internal-held-active (1), external-from-dte (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls the reporting of the status of the DTE's Request to Send (RTS) control signal, specifically the generation of traps in response to control signal state changes. If Internally Held Active, the unit will ignore the actual status and always report this signal Active. If External, the unit will reflect the status as driven by the DTE; as such, Traps will be generated due to change of state (these may be useful for a network manager's assessment of interface status. (1) Internally Held Active (2) Externally Presented from DTE" ::= { tfrapCfgDteTable 15 }
tfrapCfgDteRts OBJECT-TYPE SYNTAX INTEGER { internal-held-active (1), external-from-dte (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls the reporting of the status of the DTE's Request to Send (RTS) control signal, specifically the generation of traps in response to control signal state changes. If Internally Held Active, the unit will ignore the actual status and always report this signal Active. If External, the unit will reflect the status as driven by the DTE; as such, Traps will be generated due to change of state (these may be useful for a network manager's assessment of interface status. (1) Internally Held Active (2) Externally Presented from DTE" ::= { tfrapCfgDteTable 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.2.4.15.0 | tfrapCfgDteRts | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.2.4.1 | tfrapCfgDteIntfType | 1 | 1 | tfrapCfgDteIntftype |
1.3.6.1.4.1.485.5.2.4.2 | tfrapCfgDteDataMode | 1 | 1 | Inverts the DTE data for transfer across the WAN. Can make some applications, particularly HDLC-based protocols, meet density req… |
1.3.6.1.4.1.485.5.2.4.3 | tfrapCfgDteClockMode | 1 | 1 | This selection controls how the unit internally latches the transmit data from the DTE. Normal will sample data with the rising e… |
1.3.6.1.4.1.485.5.2.4.4 | tfrapCfgDteTiming | 1 | 1 | Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the … |
1.3.6.1.4.1.485.5.2.4.5 | tfrapCfgDteLineRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
1.3.6.1.4.1.485.5.2.4.6 | tfrapCfgDteChannelDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
1.3.6.1.4.1.485.5.2.4.7 | tfrapCfgDteStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
1.3.6.1.4.1.485.5.2.4.8 | tfrapCfgDteConnStatus | 1 | 1 | The current status of the WAN to DTE mappings. (1) connections valid and DS0s allocated to DTE data. (4) no connections configure… |
1.3.6.1.4.1.485.5.2.4.9 | tfrapCfgDteConnStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
1.3.6.1.4.1.485.5.2.4.10 | tfrapCfgDteConnRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
1.3.6.1.4.1.485.5.2.4.11 | tfrapCfgDteConnDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
1.3.6.1.4.1.485.5.2.4.12 | tfrapCfgDteConnDs0Required | 1 | 1 | The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections. |
1.3.6.1.4.1.485.5.2.4.13 | tfrapCfgDteConnAutoStatus | 1 | 1 | There's a tight correlation among DTE data rate, starting DS0, and channel density. This read-only parameter reports the status o… |
1.3.6.1.4.1.485.5.2.4.14 | tfrapCfgDteConnAutoUpdate | 1 | 1 | Updates the connection-critical parameters: line rate, channel density and starting ds0; drops the current connection; and initia… |
1.3.6.1.4.1.485.5.2.4.16 | tfrapCfgDteDtr | 1 | 1 | Controls the reporting of the status of the DTE's Data Terminal Ready (DTR) control signal, specifically the generation of traps … |
1.3.6.1.4.1.485.5.2.4.18 | tfrapCfgDteDcdOutput | 1 | 1 | Specifies the behavior of the Data Carrier Detect (DCD) control signal generated by the unit towards the DTE. (1) inactive always… |
1.3.6.1.4.1.485.5.2.4.19 | tfrapCfgDteDsrOutput | 1 | 1 | Specifies the behavior of the Data Set Ready (DSR) control signal generated by the unit towards the DTE. (1) inactive always: si… |
1.3.6.1.4.1.485.5.2.4.20 | tfrapCfgDteCtsOutput | 1 | 1 | Specifies the behavior of the Clear to Send (CTS) control signal generated by the unit towards the DTE. (1) inactive always: sign… |