Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock
returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2)
uses the clock (ST/TC) generated by the node to sample tx
data. Loop-1 is the preferred mode. Loop-2 timing could experience
data errors at high rates or due to long DTE cable runs - may
need to Invert the clock (see CfgDteClockMode).
(1) Loop 1: external clock returned from DTE with data
(2) Loop 2: internal clock used to sample incoming data
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock
returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2)
uses the clock (ST/TC) generated by the node to sample tx
data. Loop-1 is the preferred mode. Loop-2 timing could experience
data errors at high rates or due to long DTE cable runs - may
need to Invert the clock (see CfgDteClockMode).
(1) Loop 1: external clock returned from DTE with data
(2) Loop 2: internal clock used to sample incoming data
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapCfgDteTiming OBJECT-TYPE SYNTAX INTEGER { loop-1 (1), loop-2 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the clock (ST/TC) generated by the node to sample tx data. Loop-1 is the preferred mode. Loop-2 timing could experience data errors at high rates or due to long DTE cable runs - may need to Invert the clock (see CfgDteClockMode). (1) Loop 1: external clock returned from DTE with data (2) Loop 2: internal clock used to sample incoming data" ::= { tfrapCfgDteTable 4 }
tfrapCfgDteTiming OBJECT-TYPE SYNTAX INTEGER { loop-1 (1), loop-2 (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the clock (ST/TC) generated by the node to sample tx data. Loop-1 is the preferred mode. Loop-2 timing could experience data errors at high rates or due to long DTE cable runs - may need to Invert the clock (see CfgDteClockMode). (1) Loop 1: external clock returned from DTE with data (2) Loop 2: internal clock used to sample incoming data" ::= { tfrapCfgDteTable 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.2.4.4.0 | tfrapCfgDteTiming | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.2.4.1 | tfrapCfgDteIntfType | 1 | 1 | tfrapCfgDteIntftype |
| 1.3.6.1.4.1.485.5.2.4.2 | tfrapCfgDteDataMode | 1 | 1 | Inverts the DTE data for transfer across the WAN. Can make some applications, particularly HDLC-based protocols, meet density req… |
| 1.3.6.1.4.1.485.5.2.4.3 | tfrapCfgDteClockMode | 1 | 1 | This selection controls how the unit internally latches the transmit data from the DTE. Normal will sample data with the rising e… |
| 1.3.6.1.4.1.485.5.2.4.5 | tfrapCfgDteLineRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.5.2.4.6 | tfrapCfgDteChannelDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.5.2.4.7 | tfrapCfgDteStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.5.2.4.8 | tfrapCfgDteConnStatus | 1 | 1 | The current status of the WAN to DTE mappings. (1) connections valid and DS0s allocated to DTE data. (4) no connections configure… |
| 1.3.6.1.4.1.485.5.2.4.9 | tfrapCfgDteConnStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.5.2.4.10 | tfrapCfgDteConnRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.5.2.4.11 | tfrapCfgDteConnDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.5.2.4.12 | tfrapCfgDteConnDs0Required | 1 | 1 | The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections. |
| 1.3.6.1.4.1.485.5.2.4.13 | tfrapCfgDteConnAutoStatus | 1 | 1 | There's a tight correlation among DTE data rate, starting DS0, and channel density. This read-only parameter reports the status o… |
| 1.3.6.1.4.1.485.5.2.4.14 | tfrapCfgDteConnAutoUpdate | 1 | 1 | Updates the connection-critical parameters: line rate, channel density and starting ds0; drops the current connection; and initia… |
| 1.3.6.1.4.1.485.5.2.4.15 | tfrapCfgDteRts | 1 | 1 | Controls the reporting of the status of the DTE's Request to Send (RTS) control signal, specifically the generation of traps in r… |
| 1.3.6.1.4.1.485.5.2.4.16 | tfrapCfgDteDtr | 1 | 1 | Controls the reporting of the status of the DTE's Data Terminal Ready (DTR) control signal, specifically the generation of traps … |
| 1.3.6.1.4.1.485.5.2.4.18 | tfrapCfgDteDcdOutput | 1 | 1 | Specifies the behavior of the Data Carrier Detect (DCD) control signal generated by the unit towards the DTE. (1) inactive always… |
| 1.3.6.1.4.1.485.5.2.4.19 | tfrapCfgDteDsrOutput | 1 | 1 | Specifies the behavior of the Data Set Ready (DSR) control signal generated by the unit towards the DTE. (1) inactive always: si… |
| 1.3.6.1.4.1.485.5.2.4.20 | tfrapCfgDteCtsOutput | 1 | 1 | Specifies the behavior of the Clear to Send (CTS) control signal generated by the unit towards the DTE. (1) inactive always: sign… |