Address Resolution Dlcis determines which dlcis are
used for address resolution. Multiple DLCI support
only applies to piggyback mode; in other management
modes, only the configured default dlci is used
(1) Support the configured Address Resolution protocol(s)
out both ports on the single configured default DLCI
only (CfgFrDLCIValue).
(2) Support the configured Address Resolution protocol(s)
out both ports on all active DLCIs (per LMI).
(3) Support the configured Address Resolution protocol(s)
out the WAN on all active DLCIs (per LMI) and out the
DTE on only the single default DLCI (CfgFrDLCIValue).
(4) Support the configured Address Resolution protocol(s)
out the DTE on all active DLCIs (per LMI) and out the
WAN on only the single default DLCI (CfgFrDLCIValue).
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
Address Resolution Dlcis determines which dlcis are
used for address resolution. Multiple DLCI support
only applies to piggyback mode; in other management
modes, only the configured default dlci is used
(1) Support the configured Address Resolution protocol(s)
out both ports on the single configured default DLCI
only (CfgFrDLCIValue).
(2) Support the configured Address Resolution protocol(s)
out both ports on all active DLCIs (per LMI).
(3) Support the configured Address Resolution protocol(s)
out the WAN on all active DLCIs (per LMI) and out the
DTE on only the single default DLCI (CfgFrDLCIValue).
(4) Support the configured Address Resolution protocol(s)
out the DTE on all active DLCIs (per LMI) and out the
WAN on only the single default DLCI (CfgFrDLCIValue).
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapCfgFrAddrResDlcis OBJECT-TYPE SYNTAX INTEGER { single (1), multiple (2), t1multi (3), dtemulti (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Address Resolution Dlcis determines which dlcis are used for address resolution. Multiple DLCI support only applies to piggyback mode; in other management modes, only the configured default dlci is used (1) Support the configured Address Resolution protocol(s) out both ports on the single configured default DLCI only (CfgFrDLCIValue). (2) Support the configured Address Resolution protocol(s) out both ports on all active DLCIs (per LMI). (3) Support the configured Address Resolution protocol(s) out the WAN on all active DLCIs (per LMI) and out the DTE on only the single default DLCI (CfgFrDLCIValue). (4) Support the configured Address Resolution protocol(s) out the DTE on all active DLCIs (per LMI) and out the WAN on only the single default DLCI (CfgFrDLCIValue)." ::= { tfrapCfgFrTable 9 }
tfrapCfgFrAddrResDlcis OBJECT-TYPE SYNTAX INTEGER { single (1), multiple (2), t1multi (3), dtemulti (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Address Resolution Dlcis determines which dlcis are used for address resolution. Multiple DLCI support only applies to piggyback mode; in other management modes, only the configured default dlci is used (1) Support the configured Address Resolution protocol(s) out both ports on the single configured default DLCI only (CfgFrDLCIValue). (2) Support the configured Address Resolution protocol(s) out both ports on all active DLCIs (per LMI). (3) Support the configured Address Resolution protocol(s) out the WAN on all active DLCIs (per LMI) and out the DTE on only the single default DLCI (CfgFrDLCIValue). (4) Support the configured Address Resolution protocol(s) out the DTE on all active DLCIs (per LMI) and out the WAN on only the single default DLCI (CfgFrDLCIValue)." ::= { tfrapCfgFrTable 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.2.5.9.0 | tfrapCfgFrAddrResDlcis | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.2.5.1 | tfrapCfgFrAddrLen | 1 | 1 | Defines the size of the DLCI address field of the Frame Relay header. This setting must correspond to the Frame Relay transmissio… |
1.3.6.1.4.1.485.5.2.5.2 | tfrapCfgFrCrcMode | 1 | 1 | This defines the manner in which the unit handles HDLC protocol errors (crc errors) in a Frame Relay application. If Discard is s… |
1.3.6.1.4.1.485.5.2.5.3 | tfrapCfgFrLmiType | 1 | 1 | The LMI type used in a Frame Relay application. This setting must match the attached Frame Relay device configuration. Annex-A an… |
1.3.6.1.4.1.485.5.2.5.4 | tfrapCfgFrLmiInactivityTimeout | 1 | 1 | Timer used by the unit to determine that an attached device is not participating in the LMI protocol and that the unit should att… |
1.3.6.1.4.1.485.5.2.5.5 | tfrapCfgFrLmiKeepaliveTimeout | 1 | 1 | Timer used by the unit to determine the frequency at which Status Enquiries are issued during LMI sourcing states where the unit… |
1.3.6.1.4.1.485.5.2.5.6 | tfrapCfgFrAddrResMode | 1 | 1 | Enable ARP (2), INARP (3), both (4), or neither (1). |
1.3.6.1.4.1.485.5.2.5.7 | tfrapCfgFrAddrResInarpTimer | 1 | 1 | The frequency at which the unit issues INARP requests (in seconds) from 5 to 86400 (24 hours). |
1.3.6.1.4.1.485.5.2.5.8 | tfrapCfgFrLmiFullStatus | 1 | 1 | Timer used by the unit to determine if an LMI Full Status Report is missing. In the absence of a Full Status report for the durat… |