The DLCI, IP address, and number of hops for a particular
node, discovered via VNIP off of an interface. The entry
may also have transit delay measurements and VBERT diagnostic
status to report as well.
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
The DLCI, IP address, and number of hops for a particular
node, discovered via VNIP off of an interface. The entry
may also have transit delay measurements and VBERT diagnostic
status to report as well.
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapVnipTopologyEntry OBJECT-TYPE SYNTAX TFRAPVnipTopologyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DLCI, IP address, and number of hops for a particular node, discovered via VNIP off of an interface. The entry may also have transit delay measurements and VBERT diagnostic status to report as well." INDEX { tfrapVnipTopologyInterface, tfrapVnipTopologyIndex } ::= { tfrapVnipTopologyTable 1 }
tfrapVnipTopologyEntry OBJECT-TYPE SYNTAX TFRAPVnipTopologyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The DLCI, IP address, and number of hops for a particular node, discovered via VNIP off of an interface. The entry may also have transit delay measurements and VBERT diagnostic status to report as well." INDEX { tfrapVnipTopologyInterface, tfrapVnipTopologyIndex } ::= { tfrapVnipTopologyTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.5.4.2.1.1 | tfrapVnipTopologyInterface | 0 | 0 | The interface off of which the peer was discovered. Topology is discovered by sending VNIP messages out each interface. Units dis… |
1.3.6.1.4.1.485.5.4.2.1.2 | tfrapVnipTopologyIndex | 0 | 0 | The number of this discovered peer in the list of nodes for this interface. For each interface, the nodes are numbered 1 through … |
1.3.6.1.4.1.485.5.4.2.1.3 | tfrapVnipTopologyDlci | 0 | 0 | The DLCI of the discovered neighboring peer. This may be different from the local DLCI. |
1.3.6.1.4.1.485.5.4.2.1.4 | tfrapVnipTopologyIpAddr | 0 | 0 | The IP address for the discovered peer. |
1.3.6.1.4.1.485.5.4.2.1.5 | tfrapVnipTopologyNumHops | 0 | 0 | The discovered peer is this number of hops away. Each hop is a VNIP peer. |
1.3.6.1.4.1.485.5.4.2.1.6 | tfrapVnipTopologyLocalDlci | 0 | 0 | The DLCI from this unit over which the remote peer was discovered. |
1.3.6.1.4.1.485.5.4.2.1.10 | tfrapVnipTopoTDNumSamples | 0 | 0 | The number of transit delay samples collected. |
1.3.6.1.4.1.485.5.4.2.1.11 | tfrapVnipTopoTDAvgDelay | 0 | 0 | The average transit delay between this unit and the remote peer (in milliseconds). |
1.3.6.1.4.1.485.5.4.2.1.12 | tfrapVnipTopoTDMaxDelay | 0 | 0 | The maximum transit delay between this node and the remote peer (in milliseconds). |
1.3.6.1.4.1.485.5.4.2.1.13 | tfrapVnipTopoTDMinDelay | 0 | 0 | The minimum transit delay between this node and the remote peer (in milliseconds). |
1.3.6.1.4.1.485.5.4.2.1.14 | tfrapVnipTopoTDLastDelay | 0 | 0 | The most recent transit delay measured between this node and the remote peer (in milliseconds). |
1.3.6.1.4.1.485.5.4.2.1.15 | tfrapVnipTopoVLOOPStatus | 0 | 0 | This selection displays the status of the VNIP PVC Loopback for this entry. This loopback is initiated by the remote node through… |
1.3.6.1.4.1.485.5.4.2.1.16 | tfrapVnipTopoVBERTStatus | 0 | 0 | Displays the current status of the VBERT/VLOOP test. (1) Off: no test has run or the entry has been cleared (2) Testing: the entr… |
1.3.6.1.4.1.485.5.4.2.1.17 | tfrapVnipTopoVBertTxDESetFrames | 0 | 0 | Displays the number of Frames transmitted during VBERT Test that had the Discard Eligibility indicator bit set. |
1.3.6.1.4.1.485.5.4.2.1.18 | tfrapVnipTopoVBertRxDESetFrames | 0 | 0 | Displays the number of Frames received during VBERT Test that had the Discard Eligibility indicator bit set. |
1.3.6.1.4.1.485.5.4.2.1.19 | tfrapVnipTopoVBertTxDEClrFrames | 0 | 0 | Displays the number of Frames transmitted during VBERT Test that had the Discard Eligibility indicator bit cleared. |
1.3.6.1.4.1.485.5.4.2.1.20 | tfrapVnipTopoVBertRxDEClrFrames | 0 | 0 | Displays the number of Frames received during VBERT Test that had the Discard Eligibility indicator bit cleared. |
1.3.6.1.4.1.485.5.4.2.1.21 | tfrapVnipTopoVBertTransitDelayMax | 0 | 0 | The maximum transit delay between this node and the remote peer during the VBERT test. This delay measurement will include intern… |
1.3.6.1.4.1.485.5.4.2.1.22 | tfrapVnipTopoVBertTransitDelayAvg | 0 | 0 | The average transit delay between this node and the remote peer during the VBERT test. This delay measurement will include intern… |
1.3.6.1.4.1.485.5.4.2.1.23 | tfrapVnipTopoVBertTimeElapse | 0 | 0 | Elapsed time since VBERT/VLOOP test was started or cleared (in seconds). |
1.3.6.1.4.1.485.5.4.2.1.24 | tfrapVnipTopoVBertPerUtilCIR | 0 | 0 | The calculated percent of CIR utilization during a VBERT test, this value is only valid after a test is complete not during. |
1.3.6.1.4.1.485.5.4.2.1.25 | tfrapVnipTopoVBertPerUtilEIR | 0 | 0 | The calculated percent of EIR utilization during a VBERT test, this value is only valid after a test is complete not during. |