This selection displays the status of the VNIP PVC
Loopback for this entry. This loopback is initiated
by the remote node through the VLOOP utility, causing
this node to loop data back to the remote node.
(1) Virtual Loopback path present on this PVC due to
command received from remote unit. All data received
on this DLCI will be looped back out the same interface.
(2) No active VLOOP test on this
Parsed from file TFRAP.MIB.txt
Company: None
Module: TFRAP-MIB
This selection displays the status of the VNIP PVC
Loopback for this entry. This loopback is initiated
by the remote node through the VLOOP utility, causing
this node to loop data back to the remote node.
(1) Virtual Loopback path present on this PVC due to
command received from remote unit. All data received
on this DLCI will be looped back out the same interface.
(2) No active VLOOP test on this
Parsed from file TFRAP-MIB.mib
Module: TFRAP-MIB
Vendor: Sync Research, Inc.
Module: TFRAP-MIB
[Automatically extracted from oidview.com]
tfrapVnipTopoVLOOPStatus OBJECT-TYPE SYNTAX INTEGER { loopback-enable (1), loopback-disable (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This selection displays the status of the VNIP PVC Loopback for this entry. This loopback is initiated by the remote node through the VLOOP utility, causing this node to loop data back to the remote node. (1) Virtual Loopback path present on this PVC due to command received from remote unit. All data received on this DLCI will be looped back out the same interface. (2) No active VLOOP test on this" ::= { tfrapVnipTopologyEntry 15 }
tfrapVnipTopoVLOOPStatus OBJECT-TYPE SYNTAX INTEGER { loopback-enable (1), loopback-disable (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This selection displays the status of the VNIP PVC Loopback for this entry. This loopback is initiated by the remote node through the VLOOP utility, causing this node to loop data back to the remote node. (1) Virtual Loopback path present on this PVC due to command received from remote unit. All data received on this DLCI will be looped back out the same interface. (2) No active VLOOP test on this" ::= { tfrapVnipTopologyEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.5.4.2.1.1 | tfrapVnipTopologyInterface | 0 | 0 | The interface off of which the peer was discovered. Topology is discovered by sending VNIP messages out each interface. Units dis… |
| 1.3.6.1.4.1.485.5.4.2.1.2 | tfrapVnipTopologyIndex | 0 | 0 | The number of this discovered peer in the list of nodes for this interface. For each interface, the nodes are numbered 1 through … |
| 1.3.6.1.4.1.485.5.4.2.1.3 | tfrapVnipTopologyDlci | 0 | 0 | The DLCI of the discovered neighboring peer. This may be different from the local DLCI. |
| 1.3.6.1.4.1.485.5.4.2.1.4 | tfrapVnipTopologyIpAddr | 0 | 0 | The IP address for the discovered peer. |
| 1.3.6.1.4.1.485.5.4.2.1.5 | tfrapVnipTopologyNumHops | 0 | 0 | The discovered peer is this number of hops away. Each hop is a VNIP peer. |
| 1.3.6.1.4.1.485.5.4.2.1.6 | tfrapVnipTopologyLocalDlci | 0 | 0 | The DLCI from this unit over which the remote peer was discovered. |
| 1.3.6.1.4.1.485.5.4.2.1.10 | tfrapVnipTopoTDNumSamples | 0 | 0 | The number of transit delay samples collected. |
| 1.3.6.1.4.1.485.5.4.2.1.11 | tfrapVnipTopoTDAvgDelay | 0 | 0 | The average transit delay between this unit and the remote peer (in milliseconds). |
| 1.3.6.1.4.1.485.5.4.2.1.12 | tfrapVnipTopoTDMaxDelay | 0 | 0 | The maximum transit delay between this node and the remote peer (in milliseconds). |
| 1.3.6.1.4.1.485.5.4.2.1.13 | tfrapVnipTopoTDMinDelay | 0 | 0 | The minimum transit delay between this node and the remote peer (in milliseconds). |
| 1.3.6.1.4.1.485.5.4.2.1.14 | tfrapVnipTopoTDLastDelay | 0 | 0 | The most recent transit delay measured between this node and the remote peer (in milliseconds). |
| 1.3.6.1.4.1.485.5.4.2.1.16 | tfrapVnipTopoVBERTStatus | 0 | 0 | Displays the current status of the VBERT/VLOOP test. (1) Off: no test has run or the entry has been cleared (2) Testing: the entr… |
| 1.3.6.1.4.1.485.5.4.2.1.17 | tfrapVnipTopoVBertTxDESetFrames | 0 | 0 | Displays the number of Frames transmitted during VBERT Test that had the Discard Eligibility indicator bit set. |
| 1.3.6.1.4.1.485.5.4.2.1.18 | tfrapVnipTopoVBertRxDESetFrames | 0 | 0 | Displays the number of Frames received during VBERT Test that had the Discard Eligibility indicator bit set. |
| 1.3.6.1.4.1.485.5.4.2.1.19 | tfrapVnipTopoVBertTxDEClrFrames | 0 | 0 | Displays the number of Frames transmitted during VBERT Test that had the Discard Eligibility indicator bit cleared. |
| 1.3.6.1.4.1.485.5.4.2.1.20 | tfrapVnipTopoVBertRxDEClrFrames | 0 | 0 | Displays the number of Frames received during VBERT Test that had the Discard Eligibility indicator bit cleared. |
| 1.3.6.1.4.1.485.5.4.2.1.21 | tfrapVnipTopoVBertTransitDelayMax | 0 | 0 | The maximum transit delay between this node and the remote peer during the VBERT test. This delay measurement will include intern… |
| 1.3.6.1.4.1.485.5.4.2.1.22 | tfrapVnipTopoVBertTransitDelayAvg | 0 | 0 | The average transit delay between this node and the remote peer during the VBERT test. This delay measurement will include intern… |
| 1.3.6.1.4.1.485.5.4.2.1.23 | tfrapVnipTopoVBertTimeElapse | 0 | 0 | Elapsed time since VBERT/VLOOP test was started or cleared (in seconds). |
| 1.3.6.1.4.1.485.5.4.2.1.24 | tfrapVnipTopoVBertPerUtilCIR | 0 | 0 | The calculated percent of CIR utilization during a VBERT test, this value is only valid after a test is complete not during. |
| 1.3.6.1.4.1.485.5.4.2.1.25 | tfrapVnipTopoVBertPerUtilEIR | 0 | 0 | The calculated percent of EIR utilization during a VBERT test, this value is only valid after a test is complete not during. |