This indicates the current status of LMI Auto Sensing if
it's enabled.
(1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A
(2) Searching: unit is attempting to determine the LMI type of
the attached equipment by issuing LMI messages of each LMI
type and searching for responses.
(3) Learned Annex-D: unit has successfully detected Annex-D LMI
(ANSI T1.617 Annex D)
(4) Learned Annex-A: unit has successfully detected Annex-A LMI
(ITU/CCITT Q.933 Annex A)
(5) Learned Type 1: unit has successfully detected Type 1 LMI
(Cisco, Group of four, LMI)
Parsed from file SFRAP.MIB.txt
Company: None
Module: SFRAP-MIB
This indicates the current status of LMI Auto Sensing if
it's enabled.
(1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A
(2) Searching: unit is attempting to determine the LMI type of
the attached equipment by issuing LMI messages of each LMI
type and searching for responses.
(3) Learned Annex-D: unit has successfully detected Annex-D LMI
(ANSI T1.617 Annex D)
(4) Learned Annex-A: unit has successfully detected Annex-A LMI
(ITU/CCITT Q.933 Annex A)
(5) Learned Type 1: unit has successfully detected Type 1 LMI
(Cisco, Group of four, LMI)
Parsed from file SFRAP-MIB.mib
Module: SFRAP-MIB
Vendor: Sync Research, Inc.
Module: SFRAP-MIB
[Automatically extracted from oidview.com]
sfrapStatusLmiAutosense OBJECT-TYPE SYNTAX INTEGER { disabled (1), searching (2), learned-annex-d (3), learned-annex-a (4), learned-type1 (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the current status of LMI Auto Sensing if it's enabled. (1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A (2) Searching: unit is attempting to determine the LMI type of the attached equipment by issuing LMI messages of each LMI type and searching for responses. (3) Learned Annex-D: unit has successfully detected Annex-D LMI (ANSI T1.617 Annex D) (4) Learned Annex-A: unit has successfully detected Annex-A LMI (ITU/CCITT Q.933 Annex A) (5) Learned Type 1: unit has successfully detected Type 1 LMI (Cisco, Group of four, LMI)" ::= { sfrapStatus 12 }
sfrapStatusLmiAutosense OBJECT-TYPE SYNTAX INTEGER { disabled (1), searching (2), learned-annex-d (3), learned-annex-a (4), learned-type1 (5) } ACCESS read-only STATUS mandatory DESCRIPTION "This indicates the current status of LMI Auto Sensing if it's enabled. (1) Disabled: LMI is configured as Type 1, Annex-D, or Annex-A (2) Searching: unit is attempting to determine the LMI type of the attached equipment by issuing LMI messages of each LMI type and searching for responses. (3) Learned Annex-D: unit has successfully detected Annex-D LMI (ANSI T1.617 Annex D) (4) Learned Annex-A: unit has successfully detected Annex-A LMI (ITU/CCITT Q.933 Annex A) (5) Learned Type 1: unit has successfully detected Type 1 LMI (Cisco, Group of four, LMI)" ::= { sfrapStatus 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.7.4.12.0 | sfrapStatusLmiAutosense | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.7.4.2 | sfrapVnipTopologyTable | 1 | 23 | Topology of peers discovered via VNIP, organized by the interface (DATA1 or DATA2) from which they were discovered and an entry n… |
| 1.3.6.1.4.1.485.7.4.3 | sfrapStatusMgmtTable | 5 | 10 | None |
| 1.3.6.1.4.1.485.7.4.4 | sfrapStatusLedTable | 14 | 28 | None |
| 1.3.6.1.4.1.485.7.4.5 | sfrapVnipTransitDelayClear | 1 | 1 | Allows the user to clear all the VNIP Transit Delay data collected in the VNIP topology database. |
| 1.3.6.1.4.1.485.7.4.6 | sfrapLmiSourcing | 1 | 1 | What type of LMI sourcing is being done: initializing (1), passthrough (2), emulating a user device on the To-DTE (3), emulating … |
| 1.3.6.1.4.1.485.7.4.7 | sfrapStatusDteTable | 1 | 13 | The table of DTE port statuses. |
| 1.3.6.1.4.1.485.7.4.8 | sfrapStatusClockRate | 1 | 1 | This is the value in Kbps of the Receive Clock Frequency, for both the TO-DTE and TO-DCE ports. |
| 1.3.6.1.4.1.485.7.4.9 | sfrapStatusToDteRxClockMode | 1 | 1 | The status of the Receive clocking mode. |
| 1.3.6.1.4.1.485.7.4.10 | sfrapStatusDipswitchTable | 6 | 12 | sfrapStatusDipswitchtable |
| 1.3.6.1.4.1.485.7.4.11 | sfrapVBertClear | 1 | 1 | Allows the user to clear all the VBERT data collected in the VNIP topology database as long as the entry is not in a test status. |
| 1.3.6.1.4.1.485.7.4.13 | sfrapStatusTxClockDetect | 1 | 1 | This selection displays the status of the TO-DCE transmit clock auto detection process. (1)inactive - The Auto Detect option was … |