This selection displays the status of the TO-DCE
transmit clock auto detection process.
(1)inactive - The Auto Detect option was not
selected.
(2)initiate - The Auto Detect option was selected
and is initializing.
(3)trying-cut-thru - The Auto Detect option is trying
to verify the integrity of the TO-DCE transmit clock
mode selected in Cut Through mode
(4)failed-cut-thru - This mechanism has detected that the
LMI integrity check has failed.
(5)trying-inband-normal - The Auto Detection mechanism
has set the TO-DCE Tx clock to normal timing and is
performing the link integrity check, to determine if this
selection is correct
(6)success-inband-norm - The Auto Detection mechanism has
determined that the TO-DCE Tx clock timing is successful
in normal mode.
(7)trying-inband-invert - The Auto Detection mechanism
has determined that the TO-DCE clock mode failed using
normal timing, now it has inverted the clock.
(8)success-inband-invert - The mechanism has decided that
the TO-DCE Tx clock needs to be inverted.
(9)failed-in-band - Neither Normal or Invert timing was
successful.
(10)terminated - The Auto Detection mechanism has been
terminated.
Parsed from file SFRAP.MIB.txt
Company: None
Module: SFRAP-MIB
This selection displays the status of the TO-DCE
transmit clock auto detection process.
(1)inactive - The Auto Detect option was not
selected.
(2)initiate - The Auto Detect option was selected
and is initializing.
(3)trying-cut-thru - The Auto Detect option is trying
to verify the integrity of the TO-DCE transmit clock
mode selected in Cut Through mode
(4)failed-cut-thru - This mechanism has detected that the
LMI integrity check has failed.
(5)trying-inband-normal - The Auto Detection mechanism
has set the TO-DCE Tx clock to normal timing and is
performing the link integrity check, to determine if this
selection is correct
(6)success-inband-norm - The Auto Detection mechanism has
determined that the TO-DCE Tx clock timing is successful
in normal mode.
(7)trying-inband-invert - The Auto Detection mechanism
has determined that the TO-DCE clock mode failed using
normal timing, now it has inverted the clock.
(8)success-inband-invert - The mechanism has decided that
the TO-DCE Tx clock needs to be inverted.
(9)failed-in-band - Neither Normal or Invert timing was
successful.
(10)terminated - The Auto Detection mechanism has been
terminated.
Parsed from file SFRAP-MIB.mib
Module: SFRAP-MIB
Vendor: Sync Research, Inc.
Module: SFRAP-MIB
[Automatically extracted from oidview.com]
sfrapStatusTxClockDetect OBJECT-TYPE SYNTAX INTEGER { inactive (1), initiate (2), trying-cut-thru (3), failed-cut-thru (4), trying-inband-norm (5), success-inband-norm (6), failed-inband-norm (7), trying-inband-invert (8), success-inband-invert (9), failed-inband (10), terminate (11) } ACCESS read-only STATUS mandatory DESCRIPTION "This selection displays the status of the TO-DCE transmit clock auto detection process. (1)inactive - The Auto Detect option was not selected. (2)initiate - The Auto Detect option was selected and is initializing. (3)trying-cut-thru - The Auto Detect option is trying to verify the integrity of the TO-DCE transmit clock mode selected in Cut Through mode (4)failed-cut-thru - This mechanism has detected that the LMI integrity check has failed. (5)trying-inband-normal - The Auto Detection mechanism has set the TO-DCE Tx clock to normal timing and is performing the link integrity check, to determine if this selection is correct (6)success-inband-norm - The Auto Detection mechanism has determined that the TO-DCE Tx clock timing is successful in normal mode. (7)trying-inband-invert - The Auto Detection mechanism has determined that the TO-DCE clock mode failed using normal timing, now it has inverted the clock. (8)success-inband-invert - The mechanism has decided that the TO-DCE Tx clock needs to be inverted. (9)failed-in-band - Neither Normal or Invert timing was successful. (10)terminated - The Auto Detection mechanism has been terminated." ::= { sfrapStatus 13 }
sfrapStatusTxClockDetect OBJECT-TYPE SYNTAX INTEGER { inactive (1), initiate (2), trying-cut-thru (3), failed-cut-thru (4), trying-inband-norm (5), success-inband-norm (6), failed-inband-norm (7), trying-inband-invert (8), success-inband-invert (9), failed-inband (10), terminate (11) } ACCESS read-only STATUS mandatory DESCRIPTION "This selection displays the status of the TO-DCE transmit clock auto detection process. (1)inactive - The Auto Detect option was not selected. (2)initiate - The Auto Detect option was selected and is initializing. (3)trying-cut-thru - The Auto Detect option is trying to verify the integrity of the TO-DCE transmit clock mode selected in Cut Through mode (4)failed-cut-thru - This mechanism has detected that the LMI integrity check has failed. (5)trying-inband-normal - The Auto Detection mechanism has set the TO-DCE Tx clock to normal timing and is performing the link integrity check, to determine if this selection is correct (6)success-inband-norm - The Auto Detection mechanism has determined that the TO-DCE Tx clock timing is successful in normal mode. (7)trying-inband-invert - The Auto Detection mechanism has determined that the TO-DCE clock mode failed using normal timing, now it has inverted the clock. (8)success-inband-invert - The mechanism has decided that the TO-DCE Tx clock needs to be inverted. (9)failed-in-band - Neither Normal or Invert timing was successful. (10)terminated - The Auto Detection mechanism has been terminated." ::= { sfrapStatus 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.7.4.13.0 | sfrapStatusTxClockDetect | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.485.7.4.2 | sfrapVnipTopologyTable | 1 | 23 | Topology of peers discovered via VNIP, organized by the interface (DATA1 or DATA2) from which they were discovered and an entry n… |
1.3.6.1.4.1.485.7.4.3 | sfrapStatusMgmtTable | 5 | 10 | None |
1.3.6.1.4.1.485.7.4.4 | sfrapStatusLedTable | 14 | 28 | None |
1.3.6.1.4.1.485.7.4.5 | sfrapVnipTransitDelayClear | 1 | 1 | Allows the user to clear all the VNIP Transit Delay data collected in the VNIP topology database. |
1.3.6.1.4.1.485.7.4.6 | sfrapLmiSourcing | 1 | 1 | What type of LMI sourcing is being done: initializing (1), passthrough (2), emulating a user device on the To-DTE (3), emulating … |
1.3.6.1.4.1.485.7.4.7 | sfrapStatusDteTable | 1 | 13 | The table of DTE port statuses. |
1.3.6.1.4.1.485.7.4.8 | sfrapStatusClockRate | 1 | 1 | This is the value in Kbps of the Receive Clock Frequency, for both the TO-DTE and TO-DCE ports. |
1.3.6.1.4.1.485.7.4.9 | sfrapStatusToDteRxClockMode | 1 | 1 | The status of the Receive clocking mode. |
1.3.6.1.4.1.485.7.4.10 | sfrapStatusDipswitchTable | 6 | 12 | sfrapStatusDipswitchtable |
1.3.6.1.4.1.485.7.4.11 | sfrapVBertClear | 1 | 1 | Allows the user to clear all the VBERT data collected in the VNIP topology database as long as the entry is not in a test status. |
1.3.6.1.4.1.485.7.4.12 | sfrapStatusLmiAutosense | 1 | 1 | This indicates the current status of LMI Auto Sensing if it's enabled. (1) Disabled: LMI is configured as Type 1, Annex-D, or Ann… |