Number of status enquiry intervals that pass before
issuance of a full status enquiry message.
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.
Parsed from file usDataFr.mi2.txt
Company: None
Module: Unisphere-Data-FRAME-RELAY-MIB
Number of status enquiry intervals that pass before issuance of a full
status enquiry message.
Pertains to DTE/NNI operation only. This parameter can be reconfigured
only when the Frame Relay interface is acting as a DTE or NNI.
Parsed from file Juniper-FRAME-RELAY-MIB.mib
Module: Juniper-FRAME-RELAY-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-FRAME-RELAY-MIB
[Automatically extracted from oidview.com]
usdFrDlcmiFullEnquiryInterval OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of status enquiry intervals that pass before issuance of a full status enquiry message. Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI." REFERENCE "American National Standard T1.617-1991, Section D.7 Counter N391." DEFVAL { 6 } ::= { usdFrDlcmiEntry 6 }
juniFrDlcmiFullEnquiryInterval OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of status enquiry intervals that pass before issuance of a full status enquiry message. Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI." REFERENCE "American National Standard T1.617-1991, Section D.7 Counter N391." DEFVAL { 6 } ::= { juniFrDlcmiEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.1 | juniFrDlcmiIfIndex, usdFrDlcmiIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.2 | juniFrDlcmiState, usdFrDlcmiState | 0 | 0 | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.3 | juniFrDlcmiAddress, usdFrDlcmiAddress | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.4 | juniFrDlcmiAddressLen, usdFrDlcmiAddressLen | 0 | 0 | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the ad… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.5 | juniFrDlcmiPollingInterval, usdFrDlcmiPollingInterval | 0 | 0 | This is the number of seconds between successive status enquiry messages sent by the DTE. Pertains to DTE/NNI operation only. Th… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.7 | juniFrDlcmiErrorThreshold, usdFrDlcmiErrorThreshold | 0 | 0 | The minimum number of errors that must be observed within the number of events specified by juniFrDlcmiMonitoredEvents, to decla… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.8 | juniFrDlcmiMonitoredEvents, usdFrDlcmiMonitoredEvents | 0 | 0 | The number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' numb… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.9 | juniFrDlcmiMaxSupportedVCs, usdFrDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.10 | juniFrDlcmiMulticast, usdFrDlcmiMulticast | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.11 | juniFrDlcmiStatus, usdFrDlcmiStatus | 0 | 0 | This indicates the status of the Frame Relay interface as determined by the performance of the DLCMI. If no DLCMI is running, t… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.12 | juniFrDlcmiRowStatus, usdFrDlcmiRowStatus | 0 | 0 | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the fol… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.13 | juniFrDlcmiLowerIfIndex, usdFrDlcmiLowerIfIndex | 0 | 0 | The ifIndex of an interface over which this Frame Relay interface is to be layered. A value of zero indicates no layering. An imp… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.14 | juniFrDlcmiRole, usdFrDlcmiRole | 0 | 0 | Specifies the role this interface assumes with respect to the remote end. When acting as a DTE, the following objects are not rel… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.15 | juniFrDlcmiDcePollingInterval, usdFrDlcmiDcePollingInterval | 0 | 0 | The number of seconds within which a DCE expects to receive a Status Enquiry from the DTE. This value corresponds to the T392 tim… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.16 | juniFrDlcmiDceErrorThreshold, usdFrDlcmiDceErrorThreshold | 0 | 0 | The minimum number of errors that must be observed within the number of events specified by juniFrDlcmiDceMonitoredEvents, to de… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.17 | juniFrDlcmiDceMonitoredEvents, usdFrDlcmiDceMonitoredEvents | 0 | 0 | The number of DCE polling intervals over which accumulated errors are counted against the threshold specified in juniFrDlcmiDceE… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.18 | juniFrDlcmiMultilinkFrBundleName | 0 | 0 | This represents multilink frame relay bundle name. This object must be configured to associate the bundle name to the frame rel… |